[rancid] Release Authorised RANCID Email Issue

[Gilmour, Scott]

Ryan,
Here is the output:

$ bin/rancid -d 192.168.150.1
executing clogin -t 90 -c"show version;show redundancy secondary;show
idprom backplane;show install active;show env all;show rsp
chassis-info;show gsr chassis;show diag chassis-info;show boot;show
bootvar;show variables boot;show flash;dir /all nvram:;dir /all
bootflash:;dir /all slot0:;dir /all disk0:;dir /all slot1:;dir /all
disk1:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all
harddiska:;dir /all harddiskb:;dir /all sup-bootdisk:;dir /all
sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir /all
slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all
slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all
slavedisk2:;dir /all slavesup-bootflash:;dir /all sec-nvram:;dir /all
sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all
sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all sec-disk2:;show
controllers;show config;show controllers cbus;show diagbus;show diag;show
capture;show module;show spe version;show c7200;show inventory raw;show vtp
status;show vlan;show vlan-switch;show debug;show shun;more
system:running-config;show running-config view full;show
running-config;show config;write term" 192.168.150.1
sh: 1: clogin: not found
192.168.150.1: missed cmd(s): dir /all slavedisk2:,show rsp
chassis-info,show capture,dir /all sec-slot2:,show diag,dir /all
disk1:,show gsr chassis,dir /all sec-nvram:,show diag chassis-info,dir /all
disk2:,show running-config view full,dir /all sec-bootflash:,show spe
version,dir /all slaveslot2:,dir /all disk0:,show install active,show
bootvar,dir /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir
/all slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show variables
boot,show boot,show inventory raw,dir /all slavedisk1:,show env all,show
module,show shun,show controllers,show diagbus,more
system:running-config,dir /all slavedisk0:,show debug,show idprom
backplane,dir /all bootflash:,dir /all sup-bootdisk:,dir /all
sec-slot0:,show config,dir /all sec-disk1:,write term,show vtp status,dir
/all sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir
/all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers
cbus,dir /all slaveslot1:,dir /all nvram:,show version,show
vlan-switch,show redundancy secondary,show running-config,show c7200,dir
/all slot1:
192.168.150.1: missed cmd(s): dir /all slavedisk2:,show rsp
chassis-info,show capture,dir /all sec-slot2:,show diag,dir /all
disk1:,show gsr chassis,dir /all sec-nvram:,show diag chassis-info,dir /all
disk2:,show running-config view full,dir /all sec-bootflash:,show spe
version,dir /all slaveslot2:,dir /all disk0:,show install active,show
bootvar,dir /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir
/all slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show variables
boot,show boot,show inventory raw,dir /all slavedisk1:,show env all,show
module,show shun,show controllers,show diagbus,more
system:running-config,dir /all slavedisk0:,show debug,show idprom
backplane,dir /all bootflash:,dir /all sup-bootdisk:,dir /all
sec-slot0:,show config,dir /all sec-disk1:,write term,show vtp status,dir
/all sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir
/all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers
cbus,dir /all slaveslot1:,dir /all nvram:,show version,show
vlan-switch,show redundancy secondary,show running-config,show c7200,dir
/all slot1:
192.168.150.1: End of run not found
192.168.150.1: End of run not found
!
you have mail
$


Starting rancid-run
 bin/rancid-run
/usr/local/rancid/var/logs/networking.20130405.102327

starting: Fri Apr 5 10:23:27 EDT 2013



Trying to get all of the configs.
192.168.200.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.1: End of run not found
192.168.150.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.150.1: End of run not found
192.168.200.4: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.4: End of run not found
!
!
!
=====================================
Getting missed routers: round 1.
192.168.200.4: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.4: End of run not found
192.168.200.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.1: End of run not found
!
192.168.150.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.150.1: End of run not found
!
!
=====================================
Getting missed routers: round 2.
192.168.150.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.150.1: End of run not found
192.168.200.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.1: End of run not found
192.168.200.4: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.4: End of run not found
!
!
!
=====================================
Getting missed routers: round 3.
192.168.150.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.150.1: End of run not found
192.168.200.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.1: End of run not found
192.168.200.4: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.4: End of run not found
!
!
!
=====================================
Getting missed routers: round 4.
192.168.200.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.1: End of run not found
192.168.200.4: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.200.4: End of run not found
!
192.168.150.1: missed cmd(s): system show hardware,system show
version,system show active-config,system show uptime
192.168.150.1: End of run not found
!
!

cvs diff: Diffing .
cvs diff: Diffing configs
cvs commit: Examining .
cvs commit: Examining configs

ending: Fri Apr 5 10:23:28 EDT 2013



On Fri, Apr 5, 2013 at 9:37 AM, Ryan West <rwest at zyedge.com> wrote:

> On Fri, Apr 05, 2013 at 08:14:19, Gilmour, Scott wrote:
> > Subject: Re: [rancid] Release Authorised RANCID Email Issue
> >
> > Yes I can do for example  bin/clogin  -c 'show config' 192.168.150.1
> > and that logs in without any issue.
> > If I do a bin/rancid-run that is where my issue is occurring.  I am
> > debugging the script to see if there is something I need to edit in the
> script.
> >
> Try rancid -d 192.168.150.1 and post that.  What's in your logs when you
> try rancid-run?
>
>


-- 

Scott Gilmour | SQA Engineer

Enterasys Networks | A Siemens Enterprise Communications Company

Office: (603) 952-5924

Email: sgilmour at enterasys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20130405/752c489b/attachment.html>