[rancid] Release Authorised RANCID Email Issue

[Aaron Dudek]

Use the 2nd one

On Friday, April 5, 2013, Gilmour, Scott wrote:

> Ryan I was looking online to see how to add the path to the .bashrc and I
> want to make sure this is correct since there are a few different versions
> of how to do this.  Would I need to add it like this to the  end of the
> bashrc file under Alias Definitions?
>
> if [ -d /usr/local/rancid/bin ]; then
>     PATH=$PATH:/usr/local/rancid/bin
> fi
>
> or would I just add it this way
>
> export PATH=$PATH:/usr/local/rancid/bin
>
> Thanks for all your help,
>
> Scott
>
>
>
> On Fri, Apr 5, 2013 at 10:32 AM, Ryan West <rwest at zyedge.com<javascript:_e({}, 'cvml', 'rwest at zyedge.com');>
> > wrote:
>
>> On Fri, Apr 05, 2013 at 10:28:11, Gilmour, Scott wrote:
>> > Subject: Re: [rancid] Release Authorised RANCID Email Issue
>> >
>> > Ryan,
>> > Here is the output:
>> >
>> > $ bin/rancid -d 192.168.150.1
>> > executing clogin -t 90 -c"show version;show redundancy secondary;show
>> > idprom backplane;show install active;show env all;show rsp chassis-
>> > info;show gsr chassis;show diag chassis-info;show boot;show
>> > bootvar;show variables boot;show flash;dir /all nvram:;dir /all
>> > bootflash:;dir /all slot0:;dir /all disk0:;dir /all slot1:;dir /all
>> > disk1:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all
>> > harddiska:;dir /all harddiskb:;dir /all sup-bootdisk:;dir /all
>> > sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir /all
>> > slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all
>> > slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all
>> > slavedisk2:;dir /all slavesup- bootflash:;dir /all sec-nvram:;dir /all
>> > sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all
>> > sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all sec-
>> > disk2:;show controllers;show config;show controllers cbus;show
>> > diagbus;show diag;show capture;show module;show spe version;show
>> > c7200;show inventory raw;show vtp status;show vlan;show
>> > vlan-switch;show debug;show shun;more system:running-config;show
>> > running-config view full;show running-config;show config;write term"
>> > 192.168.150.1
>> > sh: 1: clogin: not found
>>
>> Login to your box as the rancid user and fix your PATH in .bashrc.  Need
>> to include /usr/local/rancid/bin in your path.
>>
>
>
>
> --
>
> Scott Gilmour | SQA Engineer
>
> Enterasys Networks | A Siemens Enterprise Communications Company
>
> Office: (603) 952-5924
>
> Email: sgilmour at enterasys.com <javascript:_e({}, 'cvml',
> 'sgilmour at enterasys.com');>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20130405/077294cc/attachment.html>