[rancid] Brocade MLX16 generate diff on up time change date

[Gerhard Mourani]

Hi Tobias,

Thanks a lot. I use latest version of Rancid 2.3.8 and the line to change doesn't look the same. Therefore I've modified as follow, and will test to let you know, thanks again.

-       next if (/^(System|(Active|Standby) Management|LP Slot \d+) uptime is/);
+       next if (/^(System|(Active|Standby) Management|LP Slot \d+|Switch Fabric Module \d+) (uptime|Up Time) is/);

Gerhard,

-----Original Message-----
From: rancid-discuss-bounces at shrubbery.net [mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Tobias Brunner
Sent: February-08-13 9:25 AM
To: rancid-discuss at shrubbery.net
Subject: Re: [rancid] Brocade MLX16 generate diff on up time change date

Hi,

> I've a particular small issue with Brocade/Foundry MLX16 devices. My 
> crond job is configured to run Rancid every two hours and every two 
> hours I receive messages alerting me that configs has changed on the 
> MLX16 switches but the diff is related to Up Time change like this:
> 
> - !Switch Fabric Module 1 Up Time is 64 days 3 hours 10 minutes 28 
> seconds
> + !Switch Fabric Module 1 Up Time is 64 days 5 hours 10 minutes 47 
> + seconds
> 
> This happen only on MLX16 models, the other Brocade/Foundry doesn't 
> have this problem.

We had exactly the same issue, see http://www.shrubbery.net/pipermail/rancid-discuss/2013-January/006632.html

And here are some more infos: http://tobrunet.ch/2013/01/backup-brocade-router-config-with-rancid/

Cheers,
Tobias

--
Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich Support +41 44 637 40 40 | Tel +41 44 637 40 00 | Direct +41 44 637 40 13 Skype nine.ch_support _______________________________________________
Rancid-discuss mailing list
Rancid-discuss at shrubbery.net
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss