[rancid] Cisco ASA 5505 configs

[Gene Lim]

Hi All

 

Would appreciate some advice on how I can trouble shoot this issue regarding
enable for a Cisco ASA 5505 device. Logs and configuration provided below.
Please advice.

 

==Version 1 without enable password==

/router.db

192.168.1.84:cisco:up

 

/.cloginrc

add method 192.168.1.84 ssh

add user 192.168.1.84 admin

add userpassword 192.168.1.84 {adminpwd}

 

$ bin/clogin 192.168.1.84

192.168.1.84

spawn ssh -c 3des -x -l admin 192.168.1.84

admin at 192.168.1.84's password:

Type help or '?' for a list of available commands.

CISCOASA5505> enable

Password: ********

Invalid password

Password: ********

Invalid password

Password: ********

Invalid password

Access denied.

Error: Check your Enable passwd

CISCOASA5505>

CISCOASA5505> exit

Logoff

 

/logs

Trying to get all of the configs.

192.168.1.84 clogin error: Error: Check your Enable passwd

192.168.1.84: missed cmd(s): dir /all slavedisk2:,show rsp chassis-info,show
capture,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir
/all sec-nvram:,show diag chassis-info,dir /all disk2:,show running-config
view full,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir
/all disk0:,show install active,show bootvar,dir /all slaveslot0:,dir /all
sec-slot1:,dir /all harddiska:,dir /all slavenvram:,show flash,dir /all
sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all
harddiskb:,show variables boot,show boot,show inventory raw,dir /all
slavedisk1:,show env all,show module,show shun,show controllers,show
diagbus,more system:running-config,dir /all slavedisk0:,show debug,show
idprom backplane,dir /all bootflash:,dir /all sup-bootdisk:,dir /all
sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all
sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all
sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir
/all slaveslot1:,dir /all nvram:,show version,show vlan-switch,show
redundancy secondary,show running-config,show c7200,dir /all slot1:

192.168.1.84: End of run not found

!

 

==Version 2 with enable password==

/router.db

192.168.1.84:cisco:up

 

/.cloginrc

add method 192.168.1.84 ssh

add user 192.168.1.84 admin

add password 192.168.1.84 {adminpwd} {enable at pwd}

 

$ bin/clogin 192.168.1.84

192.168.1.84

spawn ssh -c 3des -x -l admin 192.168.1.84

admin at 192.168.1.84 's password:

Permission denied, please try again.

admin at 192.168.1.84 's password:

Error: Check your passwd for 192.168.1.84

 

/logs

192.168.1.84 clogin error: Error: Check your passwd for 192.168.1.84

192.168.1.84: missed cmd(s): dir /all slavedisk2:,show rsp chassis-info,show
capture,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir
/all sec-nvram:,show diag chassis-info,dir /all disk2:,show running-config
view full,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir
/all disk0:,show install active,show bootvar,dir /all slaveslot0:,dir /all
sec-slot1:,dir /all harddiska:,dir /all slavenvram:,show flash,dir /all
sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all
harddiskb:,show variables boot,show boot,show inventory raw,dir /all
slavedisk1:,show env all,show module,show shun,show controllers,show
diagbus,more system:running-config,dir /all slavedisk0:,show debug,show
idprom backplane,dir /all bootflash:,dir /all sup-bootdisk:,dir /all
sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all
sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all
sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir
/all slaveslot1:,dir /all nvram:,show version,show vlan-switch,show
redundancy secondary,show running-config,show c7200,dir /all slot1:

192.168.1.84: End of run not found

!

 

Thank You

 

Warmest Regards,

Gene Lim

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20130712/395a2c96/attachment.html>