[rancid] HP procurve Menu logon

[Per-Olof Olsson]

On 03/02/2013 12:19 AM, heasley wrote:
> Thu, Feb 21, 2013 at 08:40:23AM +0100, Per-Olof Olsson:
>> Alex DEKKER skrev 02/20/2013 10:19 PM:
>>> On 20/02/13 17:43, heasley wrote:
>>>> btw, is this menu a standard thing with procurves?  I've never seen it,
>>>> but the one that i have is a lower-end model.
>>> It's not the default on current Procurves, you can access it with 'menu'. From what Marc
>>> is saying, it sounds like there is a way to make it go straight into the menu on login for
>>> a given username.
>>>
>>> alexd
>>> _______________________________________________
>>> Rancid-discuss mailing list
>>> Rancid-discuss at shrubbery.net
>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>
>> Only setting I found for this is in "8. Run Setup" menu
>> where you select "Logon Default" to "CLI" or "Menu"
> 
> Would you propose a patch for this, since you can test it?

Yes but it will take some time to have it to work and is fully tested.

telnet/ssh login to manager and/or operator level
ssh key-login
and some switch types.

"5" only works if you do direct login to manager level.
Login to operator level needs "3" for "CLI exit".

And one more thing.
When you start menu mode and not saved config
  "Do you want to save current configuration"-prompt
shows up before menu is started, even at login.

...

Have part of it working but not all.

>
>> /Peo
>> ----------------------------------------------------------
>> Per-Olof Olsson               Email: peo at chalmers.se
>> Chalmers tekniska högskola    IT-service
>> Hörsalsvägen 5                412 96 Göteborg
>> Tel: 031/772 6738  Fax: 031/772 8660
>> ----------------------------------------------------------
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss at shrubbery.net
>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss


/Peo