[rancid] backup problems with new element type

[Tim Eberhard]

Rancid folks,

I've hit a wall and I was hoping you all might be able to provide some
insight.

In an attempt to get some palo alto firewalls added to rancid for config
backup I'm having issues with rancid properly logging in.

>From the logs I see this for all the firewalls:
#
firewall1 panlogin error: Error: Check your passwd for firewall1
firewall1: missed cmd(s): show config running,set cli pager off,set cli
configuration-output-format set,set cli scripting-mode on,show system info
firewall1: End of run not found
#

If I run it via CLI (sudo su - ranciduser before running it..) it completes
correctly. Both are using the exact same clogin file as this works for a
lot of routers and other firewalls. It's just specifically the palo alto
firewalls that are failing.  Suggestions on what to check or how to debug
this behavior?


#

[ranciduser at tools ~]$ /usr/local/rancid/bin/panrancid -d firewall1

executing panlogin -t 90 -c"set cli scripting-mode on;set cli pager off;set
cli configuration-output-format set;show system info;show config running"
firewall1

line: firewall1

line: spawn ssh -c 3des -x -l ranciduser firewall1

line: Password:

line: Last login: Wed May  1 12:12:57 2013 from tools.removed.com

line: ranciduser at fw1(passive)>

line: ranciduser at fw1(passive)>

line: ranciduser at fw1(passive)> set ranciduser at fw1(passive)> set cli
ranciduser at fw1(passive)> set cli scripting-mode ranciduser at fw1(passive)>
set cli scripting-mode on

PROMPT MATCH: ranciduser at fw1\(passive\)[#>]

HIT COMMAND:ranciduser at fw1(passive)> set ranciduser at fw1(passive)> set cli
ranciduser at fw1(passive)> set cli scripting-mode ranciduser at fw1(passive)>
set cli scripting-mode on

COMMAND is: set cli scripting-mode on|EatCommand

HIT COMMAND:ranciduser at fw1(passive)> set cli pager off

COMMAND is: set cli pager off|EatCommand

HIT COMMAND:ranciduser at fw1(passive)> set cli configuration-output-format set

COMMAND is: set cli configuration-output-format set|EatCommand

HIT COMMAND:ranciduser at fw1(passive)> show system info

COMMAND is: show system info|ShowInfo

    In ShowInfo:: ranciduser at fw1(passive)> show system info

HIT COMMAND:ranciduser at fw1(passive)> show config running

COMMAND is: show config running|ShowConfig

    In ShowConfig: ranciduser at fw1(passive)> show config running

line:

exiting

#



Thanks for your help!

-Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20130501/5a6485a7/attachment.html>