[rancid] Palo Alto Networks

[Kishore Rajani]

Just checked, I do have that entry as well:

   'netscaler'         => 'nsrancid',
    'netscreen'         => 'nrancid',
 *   'paloalto'          => 'panrancid',*
    'procket'           => 'prancid',

Do you think I have missed it anywhere else.. is there any modification
needed in the rancid-run script? the cisco devices are being backed up
without any problem..

Regards,
Kishore


On 2 October 2013 15:21, Hughes, Doug <Douglas.Hughes at deshawresearch.com>wrote:

>  I suspect you haven’t added the mapping to your vendor table.****
>
> In rancid-fe, find the %vendortable hash (about 2/3 of the way down)****
>
> ** **
>
> Add a line:****
>
>     'paloalto'          => 'panrancid',****
>
> ** **
>
> ** **
>
> I put mine in alphabetical order, just below netscreen.****
>
> ** **
>
> *From:* Kishore Rajani [mailto:kams19 at gmail.com]
> *Sent:* Wednesday, October 02, 2013 10:14 AM
>
> *To:* Hughes, Doug
> *Cc:* Ryan Milton; rancid-discuss at googlegroups.com;
> guillaume.dupuis at novidys.com; rancid-discuss at shrubbery.net
> *Subject:* Re: [rancid] Palo Alto Networks****
>
> ** **
>
> HI Doug,****
>
> Now that I have my remote site up, here are the logs that are generated by
> rancid-run:
> exec failed router manufacturer paloalto: No such file or directory
> exec failed router manufacturer paloalto: No such file or directory
> exec failed router manufacturer paloalto: No such file or directory
> exec failed router manufacturer paloalto: No such file or directory
> exec failed router manufacturer paloalto: No such file or directory
> exec failed router manufacturer paloalto: No such file or directory
> exec failed router manufacturer paloalto: No such file or directory
> exec failed router manufacturer paloalto: No such file or directory****
>
> Any idea where I could have been wrong. I have the panlogin and panrancid
> in the "/usr/local/rancid/bin/" directory. Also I have checked the
> router.db file and it has the config like:
> FWL1:paloalto:up****
>
> FWL2:paloalto:up
> FWL3:paloalto:up
> FWL4:paloalto:up
> FWL5:paloalto:up****
>
> Thanks and Regards,
> Kishore****
>
> ** **
>
> On 25 September 2013 06:48, Kishore Rajani <kams19 at gmail.com> wrote:****
>
> I will use them as soon as the remote site becomes available.. and will
> also let you know how did it go.****
>
> ** **
>
> Appreciate your help.****
>
> ** **
>
> Regards,****
>
> Kishore****
>
> ** **
>
> On 25 September 2013 01:40, Hughes, Doug <
> Douglas.Hughes at deshawresearch.com> wrote:****
>
> I just sent you the latest versions. I’m the original creator. I can’t say
> if the other version is older, but if they are different, use the ones I
> sent. (and make sure they are first in the path)****
>
>  ****
>
> So you are saying when you run panrancid it doesn’t create the config file
> for you?****
>
>  ****
>
> *From:* Kishore Rajani [mailto:kams19 at gmail.com]
> *Sent:* Tuesday, September 24, 2013 5:44 PM
> *To:* Hughes, Doug
> *Cc:* Ryan Milton; rancid-discuss at googlegroups.com;
> guillaume.dupuis at novidys.com; rancid-discuss at shrubbery.net****
>
>
> *Subject:* Re: [rancid] Palo Alto Networks****
>
>  ****
>
> Hi All,****
>
>  ****
>
> Thanks for your inputs.. much appreciated.****
>
>  ****
>
> I think i had downloaded these files from some other website, not sure if
> you have modified it, Doug..****
>
>  ****
>
> In my setup, I am able to login into the device using panlogin.. however
> the device config are not backed up. Everything works smooth for Cisco
> devices.****
>
> I have updated the routers.db and other files for PAN devices, but no luck
> yet.****
>
>  ****
>
> Unfortunately, I am unable to reach my remote site server at the moment,
> else would have pasted the log file.****
>
>  ****
>
> Regards,****
>
> Kishore****
>
>  ****
>
>  ****
>
> On 24 September 2013 22:01, Hughes, Doug <
> Douglas.Hughes at deshawresearch.com> wrote:****
>
> Sure they can. I do it for 3 of them right now.****
>
>  ****
>
> Attached. Set your ‘switch type’ to paloalto. Works with names or IP
> addresses.****
>
>  ****
>
> *From:* Ryan Milton [mailto:rmilton at mvsusa.com]
> *Sent:* Tuesday, September 24, 2013 4:58 PM
> *To:* Hughes, Doug; Kishore Rajani; rancid-discuss at googlegroups.com
> *Cc:* guillaume.dupuis at novidys.com; rancid-discuss at shrubbery.net
> *Subject:* RE: [rancid] Palo Alto Networks****
>
>  ****
>
> I would certainly be interested in adding PAN devices to Rancid. I thought
> that they couldn’t be read. That is what I’ve found with my HP switches—but
> that is another matter. Any ideas on getting PAN devices read by Rancid
> would be useful.****
>
>  ****
>
> Regards,****
>
> Ryan Milton****
>
>  ****
>
> *From:* rancid-discuss-bounces at shrubbery.net [
> mailto:rancid-discuss-bounces at shrubbery.net<rancid-discuss-bounces at shrubbery.net>]
> *On Behalf Of *Hughes, Doug
> *Sent:* Tuesday, September 24, 2013 12:26 PM
> *To:* Kishore Rajani; rancid-discuss at googlegroups.com
> *Cc:* guillaume.dupuis at novidys.com; rancid-discuss at shrubbery.net
> *Subject:* Re: [rancid] Palo Alto Networks****
>
>  ****
>
> Yes, I have working panlogin and panrancid and have contributed them
> upstream. Have you not been able to get them to work?****
>
>  ****
>
>  ****
>
> *From:* rancid-discuss-bounces at shrubbery.net [
> mailto:rancid-discuss-bounces at shrubbery.net<rancid-discuss-bounces at shrubbery.net>]
> *On Behalf Of *Kishore Rajani
> *Sent:* Monday, September 23, 2013 9:52 AM
> *To:* rancid-discuss at googlegroups.com
> *Cc:* guillaume.dupuis at novidys.com; rancid-discuss at shrubbery.net
> *Subject:* Re: [rancid] Palo Alto Networks****
>
>  ****
>
> HI,
>
> did you manage to get the RANCID running with PAN?
>
> Regards,
> Kishore
>
> On Thursday, 29 March 2012 13:53:33 UTC+1, Guillaume Dupuis wrote:****
>
> Nate Beck <Nate.Beck <at> jivesoftware.com> writes:****
>
> >
> >
> > Has anyone on the list worked with Palo Alto Network firewalls and
> Rancid?  I
> was wondering if anyone has created a *login for them.
> > Thanks-------------------
> > Nathan BeckSr. IT Engineer
> > Jive Software
> > 503.972.9024****
>
> Hi Nate,****
>
> Did you find a *login script for PAN?****
>
> Thanks,****
>
> Guillaume Dupuis****
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-... at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss****
>
>  ****
>
> ** **
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20131002/4a953ad2/attachment.html>