[rancid] Permissions errors

Fri Sep 13 16:00:14 UTC 2013

OK, that is solved too, I think, but still getting a series of errors:

94.229.14.250 clogin error: Error: TIMEOUT reached
94.229.14.250: missed cmd(s): show stack,show module,show flash,show version,show system-information,write term,show system information
94.229.14.250: End of run not found
;
94.229.11.218: missed cmd(s): show configuration
94.229.11.218: End of run not found
;
;
;
Getting missed routers: round 4.
Received signal - ending run (1).

/usr/lib/rancid/bin/control_rancid: 461: /usr/lib/rancid/bin/control_rancid: cannot create /tmp/tmp.EACqI3Q2IP/rancid.MVSNetwork.14801.diff: Directory nonexistent
cvs diff: Diffing .
cvs diff: Diffing configs
cvs commit: Examining .
cvs commit: Examining configs

Regards,
Ryan Milton
MVS Network Manager
o: 201-447-1505 x124
c: 862-249-5230
www.mvsusa.com<http://www.mvsusa.com/>
[MVS final logo GOOD very small]

From: Hinote, Scotty (MSFC-IS40)[NICS] [mailto:willie.s.hinote at nasa.gov]
Sent: Friday, September 13, 2013 10:44 AM
To: Ryan Milton; Aaron Dudek
Cc: rancid-discuss at shrubbery.net
Subject: RE: [rancid] Permissions errors

You can set autoenable X.X.X.X 1 in your cloginrc stanzas. Or you can specify your enable password on the same line as your password as password X.X.X.X {password} {enable_password}.

From: Ryan Milton [mailto:rmilton at mvsusa.com]
Sent: Friday, September 13, 2013 9:41 AM
To: Hinote, Scotty (MSFC-IS40)[NICS]; Aaron Dudek
Cc: rancid-discuss at shrubbery.net<mailto:rancid-discuss at shrubbery.net>
Subject: RE: [rancid] Permissions errors

I'm wondering, if the issue may have to do with the login procedure. Typically we login directly into enable mode, not into operator mode. If the script is looking to do it the traditional way, would that cause the error too?

Because, I can login via ssh to the HP switch in question from the rancid sever.
When I run this script (vs an ssh -v login that works):

/usr/lib/rancid/bin/hlogin -f /var/lib/rancid/.cloginrc 94.2
94.229.11.92

Error: no enable password for 94.229.11.92 in /var/lib/rancid/.cloginrc.

Regards,
Ryan Milton
MVS Network Manager
o: 201-447-1505 x124
c: 862-249-5230
www.mvsusa.com<http://www.mvsusa.com/>
[MVS final logo GOOD very small]

From: Hinote, Scotty (MSFC-IS40)[NICS] [mailto:willie.s.hinote at nasa.gov]
Sent: Friday, September 13, 2013 10:31 AM
To: Ryan Milton; Aaron Dudek
Cc: rancid-discuss at shrubbery.net<mailto:rancid-discuss at shrubbery.net>
Subject: RE: [rancid] Permissions errors

Timeout reached usually indicates that the server is not able to establish a connection to the device due to routing, firewall, etc. Try SSHing from the rancid server to the device eg. ssh rancid_user at device. Do not use the login scripts. You can also increase the verbose output of SSH by specifying the -v flag. If you cannot SSH to the device then the rancid scripts will not work either but it rules out rancid as the issue.

From: Ryan Milton [mailto:rmilton at mvsusa.com]
Sent: Friday, September 13, 2013 9:24 AM
To: Aaron Dudek; Hinote, Scotty (MSFC-IS40)[NICS]
Cc: rancid-discuss at shrubbery.net<mailto:rancid-discuss at shrubbery.net>
Subject: RE: [rancid] Permissions errors

Ok, I attempted this a few times:

Trying to get all of the configs.
94.229.11.92 clogin error: Error: TIMEOUT reached
94.229.11.92: missed cmd(s): show stack,show module,show flash,show version,show system-information,write term,show system information
94.229.11.92: End of run not found

And then the /.MVSNetwork.run.lock happens again

Regards,
Ryan Milton
MVS Network Manager
o: 201-447-1505 x124
c: 862-249-5230
www.mvsusa.com<http://www.mvsusa.com/>
[MVS final logo GOOD very small]

From: Aaron Dudek [mailto:adudek16 at gmail.com]
Sent: Friday, September 13, 2013 9:57 AM
To: Hinote, Scotty (MSFC-IS40)[NICS]
Cc: Ryan Milton; rancid-discuss at shrubbery.net<mailto:rancid-discuss at shrubbery.net>
Subject: Re: [rancid] Permissions errors

+1

On Fri, Sep 13, 2013 at 9:51 AM, Hinote, Scotty (MSFC-IS40)[NICS] <willie.s.hinote at nasa.gov<mailto:willie.s.hinote at nasa.gov>> wrote:
[cid:image006.gif at 01CEB077.B4D8B1A0]
I would try removing the lock file and execute rancid-run again.

From: rancid-discuss-bounces at shrubbery.net<mailto:rancid-discuss-bounces at shrubbery.net> [mailto:rancid-discuss-bounces at shrubbery.net<mailto:rancid-discuss-bounces at shrubbery.net>] On Behalf Of Ryan Milton
Sent: Friday, September 13, 2013 8:46 AM
To: rancid-discuss at shrubbery.net<mailto:rancid-discuss at shrubbery.net>
Subject: [rancid] Permissions errors

What is the possible solution to this:
Is this yet another permissions issue?

hourly config diffs failed: /tmp/.MVSNetwork.run.lock exists
-rw-r----- 1 rancid rancid 0 Sep 12 17:08 /tmp/.MVSNetwork.run.lock

Regards,
Ryan Milton
MVS Network Manager
o: 201-447-1505 x124
c: 862-249-5230
www.mvsusa.com<http://www.mvsusa.com/>
[MVS final logo GOOD very small]

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss at shrubbery.net<mailto:Rancid-discuss at shrubbery.net>
http://www.shrubbery.net/mailman/listinfo/rancid-discuss

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20130913/f404e9dd/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 2724 bytes
Desc: image005.jpg
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20130913/f404e9dd/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.gif
Type: image/gif
Size: 569 bytes
Desc: image006.gif
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20130913/f404e9dd/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2724 bytes
Desc: image001.jpg
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20130913/f404e9dd/attachment-0001.jpg>