[rancid] Foundry/Brocade addition - show media

[Chris Wopat]

On Tue, Dec 9, 2014 at 2:51 AM, Roman Hochuli
<roman.hochuli at nexellent.ch> wrote:
>
> I like the idea of keeping track of optics. But what output should "show
> media validation" produce? I tried this on a bunch of devicetypes
> (rx/icx/fcx/fesx/mlxe/xmr) and none of them support that command.

I have two devices to test on - ICX6550, CER2024F. It works on the
ICX, not on the CER. ICX is running 8.x code. On CER, `show media`
shows vendor information, but not on ICX which is why it was included.
Here's some sample CER output:


#show media validation
Port       Supported Vendor               Type
----------------------------------------------------------------------
1/1/2      Yes       CISCO-MODULETEK      1G M-LX(SFP)
1/1/4      Yes       MODULETEK            10GE LR 10km (SFP +)
1/1/31     Yes       MODULETEK            10GE ER 40km (SFP+)
1/1/32     Yes       Brocade              10GE ER 40km (SFP+)


#show media | exclude EMPTY
Port 1/1/1:  Type : 1G M-TX(SFP)
Port 1/1/2:  Type : 1G M-LX(SFP)
Port 1/1/4:  Type : 10GE LR 10km (SFP +)
Port 1/1/31:  Type : 10GE ER 40km (SFP +)
Port 1/1/32:  Type : 10GE ER 40km (SFP +)

--Chris