[rancid] New device type
Rod Hendricks
rod.hendricks at graduate.uwa.edu.au
Wed Dec 16 15:26:11 UTC 2015
I don't fully understand the purpose of WriteTerm. But from what you are
saying above, is my rancid.types.conf in my original post wrong? Should
hirschmann;command;hirschmann::WriteTerm;show running-config
in fact look like
hirschmann;command;hirschmann::ShowConfig;show running-config
?
If so, I guess I've messed that up by not understanding the significance of
that keyword. Rancid server is on my work dev box - will try this out in
12hrs when i get back to the office.
Thanks again.
Cheers,
Rod.
On Wed, Dec 16, 2015 at 11:07 PM, Dan Anderson <dan.w.anderson at gmail.com>
wrote:
> ShowConfig in ciscowlc.pm uses the line counting method.
>
> while (<$INPUT>) {
> <---SNIP--->
>
> $linecnt++;
> <---SNIP--->
>
> # WLC lacks a definitive "end of config" marker.
> if ($linecnt > 5) {
> $found_end = 1;
> return(1);
> }
> return(0);
>
>
> WriteTerm in ios.pm looks for the "end" keyword.
>
> On Wed, Dec 16, 2015 at 9:50 AM, Rod Hendricks <
> rod.hendricks at graduate.uwa.edu.au> wrote:
>
>> Thanks Dan.
>>
>> Your explanation makes sense. Which script normally defines this
>> delimiter? I would be happy to settle for the moment in just
>> short-circuiting this delimiter check so I can I can get the job running.
>> Have included device config below. Don't worry about the passwords - its a
>> test unit with factory default config.
>>
>> Escape character is '^]'.
>>
>>
>>
>> Copyright (c) 2004-2015 Hirschmann Automation and Control GmbH
>>
>> All rights reserved
>>
>> Railswitch Release L2E-08.0.09
>>
>> (Build date 2015-04-06 21:32)
>>
>>
>>
>> System Name: RS-F602F7
>> Mgmt-IP : 192.168.254.103
>> Base-MAC : 00:80:63:F6:02:F7
>> System Time: 2015-01-02 10:11:52
>>
>>
>>
>> (Hirschmann Railswitch)
>> User:admin
>> Password:*******
>>
>> NOTE: Enter '?' for Command Help. Command help displays all options
>> that are valid for the 'normal' command forms of that particular
>> mode.
>> For a list of valid 'no' command forms for that mode, enter the help
>> command 'no ?'. For the syntax of a particular command form, please
>> consult the documentation.
>>
>>
>> (Hirschmann Railswitch) >enable
>>
>> (Hirschmann Railswitch) #
>> (Hirschmann Railswitch) #show running-config
>>
>> !Current Configuration:
>> !
>> !Parameter string escape handling \, 1
>> !Characters to be preceded with escape char (\): \, !, ", ', ?
>>
>> !System Description "Hirschmann Railswitch"
>> !System Version L2E-08.0.09 Build: 2015-04-06 21:32
>>
>> vlan database
>> exit
>>
>>
>> configure
>>
>> !
>>
>>
>> interface 1/1
>> no auto-negotiate
>>
>> exit
>>
>>
>> interface 1/2
>> no auto-negotiate
>>
>> exit
>>
>>
>> interface 1/3
>>
>> exit
>>
>>
>> interface 1/4
>>
>> exit
>>
>>
>> interface 1/5
>>
>> exit
>>
>>
>> interface 1/6
>>
>> exit
>>
>>
>> interface 1/7
>>
>> exit
>>
>>
>> interface 1/8
>>
>> exit
>>
>>
>> !Address Conflict Detection
>>
>> !Bridge Address Learning
>>
>> !Bridge Fast Link Detection
>>
>> !Maximum size of frame (packet size)
>>
>> !Bridge Address Relearn Detection
>>
>> !Bridge Address Relearn Threshold
>>
>> !Bridge Duplex Mismatch Detection
>>
>> !Bridge Hash Optimizing
>>
>> !Service Mode
>>
>> !VLAN Learning
>>
>>
>> !Hirschmann DHCP Relay
>>
>> !Hirschmann Device Status
>>
>>
>> !DIP Switch Admin State
>>
>>
>> !Ethernet/IP
>>
>> !Power over Ethernet (IEEE 802.3af)
>> !Selftest
>>
>> !Skip ACA on boot
>>
>>
>> !Hirschmann HIPER Ring
>> ! configuration determined by DIP switch
>> hiper-ring mode ring-switch
>> hiper-ring port primary 1/1
>> hiper-ring port secondary 1/2
>>
>> !LLDP (IEEE802.1AB Link Layer Discovery Protocol)
>>
>> !Media Redundancy Protocol (IEC 62439-2/Ed1.0, MRP)
>> !No MRP domains exist.
>>
>> !MAC/IP Based Port Security
>>
>>
>> !ProfinetIO
>>
>>
>> !Hirschmann Precision Time Protocol (PTP, IEEE 1588)
>>
>> !Hirschmann Ring Coupling
>> !Note: master/slave (also for single) part of configuration determined by
>> ! DIP switch (cannot be overridden by management)
>> ring-coupling operation on
>>
>> !Hirschmann Signal Contacts
>>
>>
>> !Hirschmann SNMP Access Control
>>
>>
>> !SNTP
>>
>>
>> !Hirschmann Broadcast Limiter
>>
>>
>> !Hirschmann Temperature Limit Settings
>>
>> users passwd admin
>> :v1:81449548fb49a99be2d6411bdb9a10ea7e9c92c9510eb373a26176b48b934890:
>> users snmpv3 authentication admin md5
>> users passwd user
>> :v1:81439e52f35ecca73b21339156609d20cf630a65d0e92261cb29e58647ae54f4:
>> users snmpv3 authentication user md5
>>
>> lineconfig
>> exit
>>
>> no spanning-tree
>>
>> !IGMP Snooping
>> exit
>>
>>
>> (Hirschmann Railswitch) #logoutConnection closed by foreign host.
>> -bash-4.2$
>>
>> Cheers,
>> Rod.
>>
>> On Wed, Dec 16, 2015 at 10:21 PM, Dan Anderson <dan.w.anderson at gmail.com>
>> wrote:
>>
>>> It sounds like it's not finding an end-of-configuration delimiter. I'm
>>> not familiar with the device type, but for Cisco devices, it usually looks
>>> for the keyword "end" by itself at the end of "show run" to determine
>>> whether or not it has successfully pulled the configuration. Other device
>>> types sometimes look for more than 5 lines of config, etc. Without knowing
>>> more about the configuration file format, I can't say which method (if
>>> either) would work for your situation.
>>>
>>> On Wed, Dec 16, 2015 at 5:49 AM, Rod Hendricks <
>>> rod.hendricks at graduate.uwa.edu.au> wrote:
>>>
>>>> Hi.
>>>>
>>>> I am really struggling with getting a new device type up and running.
>>>>
>>>> Rancid v3.2, installed into Centos 7 with yum from EPEL repo. I have
>>>> an installation that is currently working against a test Cisco router, so I
>>>> know the base install is all good.
>>>>
>>>> I have created a login script hmlogin (based off complogin, with
>>>> session paginate commented out)
>>>> I have created a perl script hirschmann.pm (based on ciscowlc.om).
>>>>
>>>> rancid.types.conf:
>>>> hirschmann;script;rancid -t hirschmann
>>>> hirschmann;login;hmlogin
>>>> hirschmann;module;hirschmann
>>>> hirschmann;inloop;hirschmann::inloop
>>>> hirschmann;command;hirschmann::WriteTerm;show running-config
>>>>
>>>> I can run it directly with hmlogin -c"show running-config"
>>>> 192.168.254.103
>>>> I get no errors running this, and I get the output expected.
>>>>
>>>> However, when I run the following: rancid -d -thirschmann
>>>> 192.168.254.103
>>>> I get:
>>>> loadtype: device type hirschmann
>>>> loadtype: found device type hirschmann in /etc/rancid/rancid.types.conf
>>>> executing hmlogin -t 90 -c"show running-config" 192.168.254.103
>>>> PROMPT MATCH:
>>>> HIT COMMAND:(Hirschmann Railswitch) #show running-config
>>>> HIT COMMAND:(Hirschmann Railswitch) #show running-config
>>>> 192.168.254.103: missed cmd(s): all commands
>>>> 192.168.254.103: End of run not found
>>>> 192.168.254.103: End of run not found
>>>> !
>>>> -bash-4.2$
>>>>
>>>> The .raw file has the full correct output of the show running-config.
>>>> The .new file only has:
>>>> !RANCID-CONTENT-TYPE: hirschmann
>>>> !
>>>>
>>>> I feel oh so close to getting this running! Appreciate any help that
>>>> can be offered.
>>>>
>>>> Cheers,
>>>> Rod.
>>>>
>>>> _______________________________________________
>>>> Rancid-discuss mailing list
>>>> Rancid-discuss at shrubbery.net
>>>> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>>>>
>>>
>>>
>>>
>>> --
>>> Dan
>>>
>>
>>
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss at shrubbery.net
>> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>>
>
>
>
> --
> Dan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20151216/7e763c73/attachment.html>
More information about the Rancid-discuss
mailing list