[rancid] Debugging Logins for netscreen and procurve switches

[Remsik,Robert]

No luck.


When using hlogin, I get the below even though hpui is in the same directory,:

rancid at truck:~/bin$ hlogin -c "show run" 10.1.3.21
10.1.3.21
spawn hpuifilter -- ssh -c  -x -l LOGIN 10.1.3.21

Error: ssh failed: couldn't execute "hpuifilter": no such file or directory

Oddly enough when I get the error in the log even though it's defined as an HP switch, the log references clogin.



Robert Remsik

ACNS

Desk Phone: 970 491 7120

Robert.Remsik at colostate.edu


________________________________
From: heasley <heas at shrubbery.net>
Sent: Friday, August 26, 2016 2:55 AM
To: Remsik,Robert
Cc: heasley; rancid-discuss at shrubbery.net
Subject: Re: [rancid] Debugging Logins for netscreen and procurve switches

Tue, Aug 23, 2016 at 05:08:22PM +0000, Remsik,Robert:
> This seems to have solved the issue.  The only remaining issue I'm encountering is for logging into HP switches.  clogin logs in, but does nothing.  I can interact with the switch normally and exit.

The HPs are either HPs or foundry OEMs, hlogin or flogin, respectively.  this
one looks like an hp; try testing with hlogin.

> In the .log:
>
> 10.1.3.21: missed cmd(s): all commands
> 10.1.3.21: End of run not found
> 10.1.3.21 clogin error: Error: Couldn't login
>
>
> Running clogin manually:
>
> rancid at server:~/bin$ ./clogin 10.1.3.21
> 10.1.3.21
> spawn ssh -x -l LOGIN 10.1.3.21
> We'd like to keep you up to date about:
>   * Software feature updates
>   * New product announcements
>   * Special events
> Please register your products now at:  www.hp.com/networking/register<http://www.hp.com/networking/register>
>
>
> LOGIN at 10.1.3.21's password:
> HP J8692A Switch 3500yl-24G
> Software revision K.15.10.0013m
>
> Copyright (C) 1991-2013 Hewlett-Packard Development Company, L.P.
>
>                    RESTRICTED RIGHTS LEGEND
>  Confidential computer software.  Valid license from HP required for possession,
>  use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer
>  Software, Computer Software Documentation, and Technical Data for Commercial
>  Items are licensed to the U.S. Government under vendor's standard commercial
>  license.
>                    HEWLETT-PACKARD DEVELOPMENT COMPANY, L.P.
>                    20555 State Highway 249, Houston, TX 77070
> SWITCH# ^[[64;237R
> SWITCH#
>
> --------
> When I do ./clogin -c "show run" 10.1.3.21 I get the below and the prompt stays there.  I have to ctrl+c out of the program:
> SWITCH# ^[[64;237R
> SWITCH# terminal length 0
> Invalid input: 0
> SWITCH#
>
> This is a new problem with rancid 3.4.9.9 and is not currently encountered on rancid 2.3.8.  Any help is appreciated, thank you in advance,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20160826/0a35058a/attachment.html>