[rancid] Issue with A10 in version 3.5.1

[heasley]

Fri, Sep 23, 2016 at 09:09:11AM +1000, Tom Mccormack:
> I’ve seen that support for A10 was added in version 3.4 with a call for feedback
> 
> http://www.gossamer-threads.com/lists/rancid/announce/8963
> 
> I am testing using the latest version 3.5.1 against an A10 Thunder
> 1030S device running the latest ACOS software 4.1.0 P4
> 
> However theres a problem
> 
> The problem is the command
> 
> a10;command;acos::ShowRunningConfig;show running-config all-partitions
> 
> in the file
> 
> /usr/local/rancid/etc/rancid.types.base
> 
> This command is no longer valid and in ACOS 4.x and it has been
> replaced by a new command

Would you show me the cli of entering this command & the error?

> show partition-config all
> 
> I’ve tried replacing the command in the rancid.types.base  file but
> the output of this command includes multiple end statements if there
> are multiple A10 partitions and it only captures up to the first end
> eg
> 
> A10-Active-vMaster[1/1]-gslb:Master#show partition-config all
> !Current configuration: 3125 bytes
> !Configuration last updated at 16:53:13 AEST Sat Sep 17 2016
> !Configuration last saved at 16:19:24 AEST Sat Sep 17 2016
> !64-bit Advanced Core OS (ACOS) version 4.1.0-P4, build 12 (Jul-22-2016,15:49)
> ....
> !
> end <--------- !
> !Current config commit point for partition 0 is 0 & config mode is
> classical-mode
> !Current configuration: 1145 bytes
> !Configuration last updated at 16:53:13 AEST Sat Sep 17 2016
> !Configuration last saved at 16:19:24 AEST Sat Sep 17 2016
> active-partition DMZ
> ....
> !
> end <------ !
> !Current config commit point for partition 1 is 0 & config mode is
> classical-mode
> !Current configuration: 936 bytes
> !Configuration last updated at 16:53:13 AEST Sat Sep 17 2016
> !Configuration last saved at 16:19:24 AEST Sat Sep 17 2016
> active-partition Trusted
> .....
> !
> end <--------- !
> !Current config commit point for partition 2 is 0 & config mode is
> classical-mode
> A10-Active-vMaster[1/1]-gslb:Master#

Would you show me the complete output w/o removing lines? you are free to
obfuscate pwds, names, etc.  and please send it as an attachment so that
your MUA doesn't mangle it.

> I would love to get this working  but I don’t have the programming
> skills to correct this myself ?
> 
> I'm happy to work with anyone who could ?
> 
> Thanks in advance
> 
> Rgds
> Tom