[rancid] Device DB entry does not update, but rancid-run against device works

[John Heasley]

> Am 06.02.2017 um 11:13 schrieb Evan Hisey - NOAA Affiliate <evan.hisey at noaa.gov>:
> 
> All-
>  This has been a problem I can narrow down. If I do "rancid-run -t cisco firewall.example.com" I get the output from the firewall to a file just as you would expect. When I put the device in the router.db (there are about a dozen working devices already) and do a rancid run, all that every gets update in the CVS is "new router", it never gets the actual output from the rancid run.
> 
> I have 2 other ASA's that work just fine in the same file.

Check the log file for login, SCM, or collection failures. 

> 
> -- 
> Evan Hisey
> The National Water Center
> NOAA's National Weather Service
> Tuscaloosa, Alabama
> Office: 205-347-1337
> Email: evan.hisey at noaa.gov
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20170206/8c7d6eb0/attachment.html>