[rancid] Need Help

Bipin Sharma bipinsharma091 at gmail.com
Sun Jul 9 07:38:15 UTC 2017


Any one Please help me on this isseu..


san-sw1.subisu.net.np: missed cmd(s): show running-config view full,write
term,show running-configsan-sw1.subisu.net.np: missed cmd(s): show
running-config view full,write term,show running-config

On Sat, Jul 8, 2017 at 10:47 PM, Bipin Sharma <bipinsharma091 at gmail.com>
wrote:

> Hi there,
>
>
> I have configured rancid 2.3.8 and viewvc to view cvs file  on my
> enterprise network but while getting the configs it shows the error. i.e
>
> switch1.x.x.x: missed cmd(s): show chassis alarms,show chassis hardware
> detail,show system license,show chassis scb,show chassis feb,show chassis
> routing-engine,show chassis firmware,show version detail,show chassis feb
> detail,show configuration,show system boot-messages,show chassis cfeb,show
> chassis clocks,show chassis sfm detail,show chassis ssb,show chassis fpc
> detail,show chassis environment,show system core-dumps
> switch1.x.x.x: End of run not found
>
>
> I even tried to rancid -d <switch-name> after that i get half
> configuration i.e
>
> !RANCID-CONTENT-TYPE: cisco
> !
> !Chassis type: WS-C2960CPD-8PT-L - a 2900XL switch
> !CPU: PowerPC405
> !
> !Memory: main 131072K
> !Serial Number: FOC1745Y2SP
> !Model revision number           : C0
> !Model number                    : WS-C2960CPD-8PT-L
> !Motherboard assembly number     : 73-12988-06
> !Motherboard serial number       : FOC17448QAT
> !Motherboard revision number     : A0
> !
> !Processor ID: FOC1745Y2SP
> !
> !Power: Power Source   Type           Power(w)  Mode
> !
> !Image: Software: C2960c405-UNIVERSALK9-M, 12.2(55)EX2, RELEASE SOFTWARE
> (fc1)
> !Image: Compiled: Wed 18-May-11 13:53 by prod_rel_team
> !Image: flash:/c2960c405-universalk9-mz.122-55.EX2/c2960c405-universalk9-mz.122-55.EX2.bin
>
> !
> !BOOTLDR: Version 12.2(55r)EX4, RELEASE SOFTWARE (fc1)
> !
> !
> !Variable: BOOT path-list      : flash:/c2960c405-universalk9-
> mz.122-55.EX2/c2960c405-universalk9-mz.122-55.EX2.bin
> !Variable: Config file         : flash:/config.text
> !Variable: Private Config file : flash:/private-config.text
> !Variable: Enable Break        : no
> !Variable: Manual Boot         : no
> !Variable: HELPER path-list    :
> !Variable: Auto upgrade        : yes
> !Variable: Auto upgrade path   :
> !Variable: NVRAM/Config file
> !Variable:       buffer size:   65536
> !Variable: Timeout for Config
> !Variable:           Download:    0 seconds
> !Variable: Config Download
> !Variable:        via DHCP:       disabled (next boot: disabled)
> !
> !Flash: Directory of flash:/
> !Flash:     4  -rwx        3576   Mar 9 1993 23:32:09 +00:00 config.text
> !Flash:     5  -rwx        1915   Mar 9 1993 23:32:09 +00:00
> private-config.text
> !Flash:     6  drwx         512   Mar 1 1993 00:14:41 +00:00
> c2960c405-universalk9-mz.122-55.EX2
> !Flash: 59996160 bytes total (45029376 bytes free)
> !
> !Flash: nvram: Directory of nvram:/
> !Flash: nvram:    57  -rw-        3576                    <no date>
> startup-config
> !Flash: nvram:    58  ----        1915                    <no date>
> private-config
> !Flash: nvram:     1  ----          35                    <no date>
> persistent-data
> !Flash: nvram:     2  -rw-           0                    <no date>
> ifIndex-table
> !Flash: nvram:     3  -rw-         597                    <no date>
> IOS-Self-Sig#3838.cer
> !Flash: nvram: 65536 bytes total (56921 bytes free)
> !
> !
> !NAME: "1",                     DESCR: "WS-C2960CPD-8PT-L"
> !PID: WS-C2960CPD-8PT-L
> !VID: V01
> !SN: FOC1745Y2SP
> !NAME: "WS-C2960CPD-8PT-L - Sensor 0", DESCR: "WS-C2960CPD-8PT-L - Sensor
> 0"
> !NAME: "WS-C2960CPD-8PT-L - Fixed Module 0", DESCR: "WS-C2960CPD-8PT-L -
> Fixed Module 0"
> !NAME: "FastEthernet0/1",       DESCR: "FastEthernet0/1"
> !NAME: "FastEthernet0/2",       DESCR: "FastEthernet0/2"
> !NAME: "FastEthernet0/3",       DESCR: "FastEthernet0/3"
> !NAME: "FastEthernet0/4",       DESCR: "FastEthernet0/4"
> !NAME: "FastEthernet0/5",       DESCR: "FastEthernet0/5"
> !NAME: "FastEthernet0/6",       DESCR: "FastEthernet0/6"
> !NAME: "FastEthernet0/7",       DESCR: "FastEthernet0/7"
> !NAME: "FastEthernet0/8",       DESCR: "FastEthernet0/8"
> !NAME: "GigabitEthernet0/1",    DESCR: "GigabitEthernet0/1"
> !NAME: "GigabitEthernet0/2",    DESCR: "GigabitEthernet0/2"
> !
> !VTP: VTP Version capable             : 1 to 3
> !VTP: VTP version running             : 1
> !VTP: VTP Domain Name                 :
> !VTP: VTP Pruning Mode                : Disabled
> !VTP: VTP Traps Generation            : Disabled
> !VTP: Device ID                       : 5ca4.8a5f.8980
> !VTP: Local updater ID is 172.22.8.76 on interface Vl63 (lowest numbered
> VLAN interface found)
> !VTP: Feature VLAN:
> !VTP: --------------
> !VTP: VTP Operating Mode                : Server
> !VTP: Maximum VLANs supported locally   : 255
> !VTP: Number of existing VLANs          : 7
> !VTP: Configuration Revision            : 2
> !VTP: MD5 digest                        : 0x72 0xEB 0x10 0xEA 0x47 0x2B
> 0x07 0xE1
> !VTP:                                     0x6A 0x8D 0xD2 0x9E 0x4A 0x99
> 0x42 0x5C
> !
> !VLAN: VLAN Name                             Status    Ports
> !VLAN: ---- -------------------------------- ---------
> -------------------------------
> !VLAN: 1    default                          active    Gi0/1, Gi0/2
> !VLAN: 63   ***mgmt_vlan***                  active    Fa0/8
> !VLAN: 748  soalti_nas1_atarkhel             active    Fa0/2, Fa0/3,
> Fa0/4, Fa0/5, Fa0/6, Fa0/7
> !VLAN: 1002 fddi-default                     act/unsup
> !VLAN: 1003 token-ring-default               act/unsup
> !VLAN: 1004 fddinet-default                  act/unsup
> !VLAN: 1005 trnet-default                    act/unsup
> !VLAN: VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp BrdgMode
> Trans1 Trans2
> !VLAN: ---- ----- ---------- ----- ------ ------ -------- ---- --------
> ------ ------
> !VLAN: 1    enet  100001     1500  -      -      -        - -
> 0      0
> !VLAN: 63   enet  100063     1500  -      -      -        - -
> 0      0
> !VLAN: 748  enet  100748     1500  -      -      -        - -
> 0      0
> !VLAN: 1002 fddi  101002     1500  -      -      -        - -
> 0      0
> !VLAN: 1003 tr    101003     1500  -      -      -        - -
> 0      0
> !VLAN: 1004 fdnet 101004     1500  -      -      -        ieee -
> 0      0
> !VLAN: 1005 trnet 101005     1500  -      -      -        ibm -
> 0      0
> !VLAN: Remote SPAN VLANs
> !VLAN: ------------------------------------------------------------------------------
>
> !VLAN: Primary Secondary Type              Ports
> !VLAN: ------- --------- ----------------- ------------------------------------------
>
> !
>
>
>
> So Please help me to over come this error.. I have tried almost every
> thing to fix this bug but i failed in every way.. Hope you guys would help
> me and suggest me to work out..
>
>
> regards.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20170709/1d2ecd61/attachment.html>


More information about the Rancid-discuss mailing list