[rancid] Quit lines in current rancid..

[Howard Leadmon]

  A few weeks ago I updated to the current rancid version of 3.6.2 as it 
fixed some known issues I was running into with the older versions of 
rancid.  The update went well, and it did resolve some of my ASA and WLC 
issues I was having grabbing Cisco configs, but now I seem to have a new 
one.

As you will see below,  I end up with it capturing bits and pieces of 
the quit messages, so I keep getting + and - updates every run as it 
backs in and out the bits that aren't being dropped at part of the 
configs.  Mostly seems to  happen on our 5508 wireless controllers, but 
at times I do see it on other devices.

  Any ideas how to resolve this, as I am not a coder, and it didn't use 
to do this on the runs..


Index: configs/algmwewircon1
===================================================================
retrieving revision 1.91
diff -u -4 -r1.91 algmwewircon1
@@ -241,8 +241,9 @@
    switchconfig strong-pwd consecutive-check enabled
    switchconfig strong-pwd default-check enabled
    switchconfig strong-pwd username-check enabled
    switchconfig strong-pwd position-check disabled
+ q)uit
    switchconfig strong-pwd case-digit-check disabled
    switchconfig strong-pwd minimum upper-case 0
    switchconfig strong-pwd minimum lower-case 0
    switchconfig strong-pwd minimum digits-chars 0
Index: configs/algmwewircon2
===================================================================
retrieving revision 1.20
diff -u -4 -r1.20 algmwewircon2
@@ -417,8 +417,9 @@
    wlan security wpa akm cckm timestamp-tolerance  1000 1
    wlan security wpa gtk-random disable 1
    wlan security pmf association-comeback 1 1
    wlan security pmf saquery-retrytimeout 200 1
+ it
    wlan profiling radius dhcp disable 1
    wlan profiling radius http disable 1
    wlan enable 1
    license boot base

Then stuff like this from an earlier run..

Index: configs/algmwewircon2
===================================================================
retrieving revision 1.17
diff -u -4 -r1.17 algmwewircon2
@@ -417,9 +417,8 @@
    wlan security wpa akm cckm timestamp-tolerance  1000 1
    wlan security wpa gtk-random disable 1
    wlan security pmf association-comeback 1 1
    wlan security pmf saquery-retrytimeout 200 1
- it
    wlan profiling radius dhcp disable 1
    wlan profiling radius http disable 1
    wlan enable 1
    license boot base


---
Howard Leadmon
PBW Communications, LLC
http://www.pbwcomm.com