[rancid] Enterasys Switches help
heasley
heas at shrubbery.net
Thu Jan 4 23:19:36 UTC 2018
Thu, Jan 04, 2018 at 01:38:15PM -0800, Azher:
> Hi Heasley,
>
> [rancid at rancid ~]$ rivrancid -d -t enterasys cal-7100-1
> executing rivlogin -t 90 -c"system show uptime;system show version;system
> show hardware;system show active-config" cal-7100-1
> cal-7100-1: missed cmd(s): all commands
> cal-7100-1: End of run not found
> cal-7100-1: clean_run is false
>
> These commands starting with "system" does not work on the Enterasys
> switches.
is it an oem of someone else's box? or a completely new enterasys
o/s?
> Thanks
> -Azher
>
>
>
> On Tue, Jan 2, 2018 at 3:27 PM, heasley <heas at shrubbery.net> wrote:
>
> > Thu, Dec 28, 2017 at 06:08:57PM -0800, Azher:
> > > Hi Chris,
> > >
> > > I added following lines in the "rancid.types.base " otherwise there is
> > just
> > > a reference of enterasys to rivrancid.
> > >
> > > enterasys;script;xrancid
> > > enterasys;login;xlogin
> > > enterasys;command;enterasys::ShowVersion;show version
> > > enterasys;command;enterasys::WriteTerm;show config
> >
> > you should not need that; there is already an entry in rancid.types.base
> > for this device type - use that.
> >
> > > Running in debug mode:
> > >
> > > [rancid at rancid ~/etc]$ rancid -d -t enterasys cal3-n7
> > > loadtype: device type enterasys
> > > loadtype: found device type enterasys in /opt/rancid/etc/rancid.types.
> > base
> > > loadtype: undefined function in enterasys: enterasys::ShowVersion
> > > Couldn't load device type spec for enterasys
> > >
> > > I am not sure why it is complaining because xrancid does have this
> > function
> > > defined:
> > >
> > > # This routine parses "show version"
> > > sub ShowVersion {
> > > print STDERR " In ShowVersion: $_" if ($debug);
> > >
> > > And in the main routine:
> > >
> > > # Main
> > > @commandtable = (
> > > {'show version' => 'ShowVersion'},
> > > ### {'show memory' => 'ShowMemory'},
> > > ### {'show diag' => 'ShowDiag'},
> > > ### {'show switch' => 'ShowSwitch'},
> > > ### {'show slot' => 'ShowSlot'},
> > > # way too confusing {'show configuration detail' => 'WriteTerm'},
> > > {'show config' => 'WriteTerm'},
> > > );
> > >
> > > Trying rivrancid also complains about no commands:
> > >
> > > [rancid at rancid ~]$ rivrancid -d cal3-n7
> > > executing rivlogin -t 90 -c"system show uptime;system show version;system
> > > show hardware;system show active-config" cal3-n7
> >
> > manually run the rivlogin command that is there to see if there is a
> > failure in that login script.
> >
> > > cal3-n7: missed cmd(s): all commands
> > > cal3-n7: End of run not found
> > > cal3-n7: clean_run is false
> > > !
> > >
> > > Thanks
> > > -Azher
> > >
> > >
> > >
> > >
> > > On Thu, Dec 28, 2017 at 2:39 PM, Gauthier, Chris <cgauthier at comscore.com
> > >
> > > wrote:
> > >
> > > > I would take a look at the rancid types file to make sure it’s running
> > the
> > > > commands you need. It seems like it’s throwing up in the very
> > beginning of
> > > > its run.
> > > >
> > > >
> > > >
> > > > There are several emails in the list on how to get into a “debugging”
> > mode
> > > > if you’re not already familiar. That will help completely isolate the
> > > > issue.
> > > >
> > > >
> > > >
> > > > --Chris
> > > >
> > > >
> > > >
> > > >
> > > > Chris Gauthier Senior Network Engineer | comScore, Inc.
> > > > t +1 *(503) 331-2704* <(503)%20331-2704> |
> > > > *cgauthier at comscore.com* <cgauthier at comscore.com>
> > > > 317
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > SW
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > Alder
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > Street,
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > Suite
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > 700
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > |
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > Portland,
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > OR
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > 97204
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > United
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > States
> > > > <https://maps.google.com/?q=317%C2%A0SW%C2%A0Alder%C2%
> > A0Street,%C2%A0Suite%C2%A0700%C2%A0%7C%C2%A0Portland,%C2%
> > A0OR%C2%A097204%C2%A0%C2%A0United%C2%A0States&entry=gmail&source=g>
> > > > *comscore.com* <http://www.comscore.com/>
> > > > This e-mail (including any attachments) may contain information
> > that is
> > > > private, confidential, or protected by attorney-client or other
> > privilege.
> > > > If you received this e-mail in error, please delete it from your
> > system and
> > > > notify sender.
> > > >
> > > >
> > > > *From: *Rancid-discuss <rancid-discuss-bounces at shrubbery.net> on
> > behalf
> > > > of Azher <azheramin at gmail.com>
> > > > *Date: *Thursday, December 28, 2017 at 2:26 PM
> > > > *To: *"rancid-discuss at shrubbery.net" <rancid-discuss at shrubbery.net>
> > > > *Subject: *[rancid] Enterasys Switches help
> > > >
> > > >
> > > >
> > > > Hi All,
> > > >
> > > > I have a large deployment of different Enterasys switches
> > > > (S,K,B,C,D,7100). It seems rancid is not happy with these switches
> > somehow.
> > > >
> > > >
> > > >
> > > > clogin to the same device successfully logs into the switch and gives
> > > > prompt and I can type the commands.
> > > >
> > > >
> > > >
> > > > When trying "rancid-run -r cal3-n7", the log file throws this error:
> > > >
> > > >
> > > >
> > > > [rancid at rancid ~/var/logs]$ tail -f extreme.20171228.113653
> > > >
> > > > starting: Thu Dec 28 11:36:53 PST 2017
> > > >
> > > > Trying to get all of the configs.
> > > >
> > > > cal3-n7 xlogin error: Error: Unknown: "terminal"
> > > > cal3-n7: missed cmd(s): show version,show config
> > > > cal3-n7: End of run not found
> > > > #
> > > > =====================================
> > > > Getting missed routers: round 1.
> > > > cal3-n7 xlogin error: Error: Unknown: "terminal"
> > > > cal3-n7: missed cmd(s): show version,show config
> > > > cal3-n7: End of run not found
> > > > #
> > > > All routers successfully completed.
> > > >
> > > > cvs diff: Diffing .
> > > > cvs diff: Diffing configs
> > > > cvs commit: Examining .
> > > > cvs commit: Examining configs
> > > > ---------------
> > > >
> > > > Here is the config section:
> > > > [rancid at rancid ~/var/extreme]$ more router.db | grep cal3-n7
> > > > cal3-n7;enterasys;up
> > > >
> > > > # Extreme Switches
> > > > add user cal3-n7 admin
> > > > add autoenable cal3-n7 1
> > > > add password cal3-n7 xxxxxxxxxxxx
> > > > add method cal3-n7 ssh
> > > >
> > > > I have gone through some of the scripts which are in the mailing list,
> > > > tried them, but no luck.
> > > >
> > > >
> > > >
> > > > Any one has experience with Enterasys devices ? Any working scripts
> > would
> > > > greatly help.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Thanks
> > > >
> > > > -Azher
> > > >
> > > >
> > > >
> > > >
> > > >
> >
> > > _______________________________________________
> > > Rancid-discuss mailing list
> > > Rancid-discuss at shrubbery.net
> > > http://www.shrubbery.net/mailman/listinfo/rancid-discuss
> >
> >
More information about the Rancid-discuss
mailing list