[rancid] Rancid and Netgear switches

[Alex DEKKER]

On 16/05/18 14:50, on at LEFerguson.com wrote:
>> If you post a snippet of config, somebody might recognise what ODM makes the switches.
> Sure, thanks.  The login is
>
> User:
> Password:
>
> The not-enabled prompt is the model in parenthesis
>
> (M4100-26G) >
>
> The enable prompt (no password required, at least as we are set up):
>
> (M4100-26G) #
>
> A "terminal length 0" will disable paging or the prompt looks like " --More-- or (q)uit".
>
> The config is exceptionally cisco-like, here's one redacted a bit:
>
> !Current Configuration:
> !
> !System Description "M4100-26G ProSafe 24-port Gigabit L2+ Intelligent Edge Managed Switch, 10.0.2.26, B1.0.1.1"
> !System Software Version "10.0.2.26"
> !System Up Time          "0 days 15 hrs 57 mins 20 secs"
> !Additional Packages     QOS,IPv6 Management,Routing
> !Current SNTP Synchronized Time: SNTP Client Mode Is Disabled
>

Looks a lot like a Ubiquiti EdgeMAX so presumably Ubiquiti and Netgear 
are buying the design from the same place.
You're in luck:
#  edgemax.pm - Ubiquity ("UBNT") EdgeMAX switch rancid procedures



alexd