[rancid] Problem rancid 3.7 after cmw / hp 5130 routers 5130 firmware upgrade

[heasley]

Wed, Oct 31, 2018 at 09:10:27AM +0100, Service Informatique CH DECIZE:
> We have made a clogin test :
> "
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> *rancid at SRV-TOOLS2:/usr/lib/rancid/bin$ ./clogin SWA22swa22spawn telnet -K
> swa22Trying 172.16.1.22...telnet: Unable to connect to remote host:
> Connection refusedspawn ssh -c aes128-cbc -x -l admin swa22admin at swa22's
> password: <SWA22><SWA22>exitConnection to swa22
> closed.rancid at SRV-TOOLS2:/usr/lib/rancid/bin$ ./clogin SWA21swa21spawn
> telnet -K swa21Trying 172.16.1.21...Connected to swa21.ch-decize.fr
> <http://swa21.ch-decize.fr>.Escape character is '^]'.Login
> authenticationUsername:adminPassword:<SWA21><SWA21>quitConnection closed by
> foreign host.rancid at SRV-TOOLS2:/usr/lib/rancid/bin$ *"
> 
> SWA22, as SWSR1, is a router for which we receive "config fetcher problems"
> mails...
> SWA21 is a router for which we have no problem.
> SWA22 clogin test shows a first telnet connexion refused. It's perhaps the
> origin of our problem ?

we do not support that module; ask whomever wrote it.  but, my guess
would be that the cause is that the device appears to not reliably
echo the <CR> after 'exit' and the loop around input must be adjusted
to accept that, as the ios module does.

i do not know the hp 5130; you might try the hp, foundry, or smc device
types that rancid supports.

> Thanks for your help.
> 
> 
> Le mer. 31 oct. 2018 à 08:44, Service Informatique CH DECIZE <
> serv.informatique.chd at gmail.com> a écrit :
> 
> > We use cmw device type (before and after upgrade)...
> > No modification in the rancid config. Just routers firmware upgrade.
> >
> >
> > Le mar. 30 oct. 2018 à 16:40, heasley <heas at shrubbery.net> a écrit :
> >
> >> Tue, Oct 30, 2018 at 12:02:09PM +0100, Service Informatique CH DECIZE:
> >> > Hello,
> >> >
> >> > We have made a firmware update on our cwm / hp 5130 routers : upgrade
> >> from
> >> > 3115P05 release (7.1.045) to 3208P03 release (7.1.070).
> >> > Since upgrade, we receive "config fetcher problems" mails, that
> >> indicates " The
> >> > following routers have not been successfully contacted for more than 24
> >> > hours".
> >> > In the rancid logs, we can see for these routers :
> >> > " Trying to get all of the configs.
> >> > swsr1: End of run not found
> >> > return
> >> > =========================================
> >> > Getting missed routers: round 1.
> >> > swsr1: End of run not found
> >> > return
> >> > ... "
> >> > Does anyone know where is the problem ?
> >> > Before upgrade, everything was ok with these routers in rancid.
> >>
> >> what device type are you using for these?  It looks like you are using a
> >> older version of rancid or have a custom module?
> >>
> >