[rancid] Aruba 2930M

[Guisepp Rodriguez]

I notice that the backup its done! Even if the command hrancid doesn't work
when I test

./bin/hrancid -t hp -d xx.xx.xx.xx

*****************
[rancid at rancid ~]$ more
/usr/local/rancid/var/xxxxxxxxxxx/configs/xx.xx.xx.xx
;RANCID-CONTENT-TYPE: hp
;
;Serial Number: xxxxxxxxx
;
;Memory: 331M
;
;Image: stamp:
 /ws/swbuildm/rel_ukiah_qaoff/code/build/lvm(swbuildm_rel_ukiah_qaoff_rel_ukiah)
;Image: Jul 21 2017 14:09:42
;Image: WC.16.04.0008
;Image: 423
;Image: Boot Image:     Primary
;Image: Boot ROM Version:    WC.17.02.0003
;Image: Active Boot ROM:     Primary
;Image: ROM WC.17.02.0003
;
;Flash: Image             Size (bytes) Date     Version
;Flash: ----------------- ------------ -------- --------------
;Flash: Primary Image    :    28278126 07/21/17 WC.16.04.0008
;Flash: Secondary Image  :    28278126 07/21/17 WC.16.04.0008
;Flash: Boot ROM Version
;Flash: ----------------
;Flash: Primary Boot ROM Version   : WC.17.02.0003
;Flash: Secondary Boot ROM Version : WC.17.02.0003
;Flash: Default Boot Image   : Primary
;Flash: Default Boot ROM     : Primary




Le ven. 20 déc. 2019, à 09 h 37, henri hemery <henri.hemery at gmail.com> a
écrit :

> Hi Guisepp,
>
> For me, the problem I still have with tis Aruba/HP switches that run
> comware 5 I think, it is the authentication.
> The enable mode ask for username+password again, and it seems that the
> scripts are not designed for that
>
> If someone found the solution, I take it!
>
> On Wed, Dec 18, 2019 at 10:48 AM Guisepp Rodriguez <guisrodi at gmail.com>
> wrote:
>
>> Ok, thanks.
>>
>> Le mer. 18 déc. 2019, à 10 h 41, henri hemery <henri.hemery at gmail.com> a
>> écrit :
>>
>>> I am using 3.9
>>>
>>> On Wed, Dec 18, 2019 at 9:48 AM Guisepp Rodriguez <guisrodi at gmail.com>
>>> wrote:
>>>
>>>> What version of rancid do you have?
>>>>
>>>> Le mer. 18 déc. 2019, à 09 h 24, henri hemery <henri.hemery at gmail.com>
>>>> a écrit :
>>>>
>>>>> Hi Guisepp,
>>>>>
>>>>> I have Aruba JL258A 2930F-8G-PoE+-2SFP+ in production, and I use
>>>>> hlogin and it works:
>>>>>
>>>>> [rancid at xxxswbkp1 bin]$ ./hlogin XXXX
>>>>> xxsw3
>>>>> spawn telnet -K XXXsw3
>>>>> Trying 10.X.X.X...
>>>>> Connected to XXXsw3.
>>>>> Escape character is '^]'.
>>>>>
>>>>> On Wed, Dec 18, 2019 at 9:02 AM Guisepp Rodriguez <guisrodi at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> What version of Rancid I need? I use rancid 3.7 and for Aruba 2930M I
>>>>>> use hlogin, hrancid. This is the output error:
>>>>>>
>>>>>> [rancid at rancid rancid]$ ./bin/hrancid -t hp -d xx.xx.xx.xx
>>>>>> executing hlogin -t 90 -c"show version;show flash;show
>>>>>> system-information;show system information;show module;show stack;show tech
>>>>>> transceivers;show config files;show config status;write term" xx.xx.xx.xx
>>>>>> sh: hlogin: command not found
>>>>>> xx.xx.xx.xx: missed cmd(s): all commands
>>>>>> xx.xx.xx.xx: End of run not found
>>>>>> xx.xx.xx.xx: clean_run is false
>>>>>> xx.xx.xx.xx: found_end is false
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Rancid-discuss mailing list
>>>>>> Rancid-discuss at shrubbery.net
>>>>>> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>>>>>>
>>>>>
>>>>
>>>> --
>>>> *Guisepp Rodriguez*
>>>>
>>>> Cell: (001)  514 627-9441
>>>> Tél: (001) 450 655-5384
>>>>
>>>>
>>>>
>>
>> --
>> *Guisepp Rodriguez*
>>
>> Cell: (001)  514 627-9441
>> Tél: (001) 450 655-5384
>>
>>
>>

-- 
*Guisepp Rodriguez*

Cell: (001)  514 627-9441
Tél: (001) 450 655-5384
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20191220/e66d370a/attachment.htm>