[rancid] Unable to figure out "end of run not found"
mnewton at pofp.com
Mon Jun 10 15:25:36 UTC 2019
No, there is not. But I guess you're thinking maybe the login doesn't work
because of heavy traffic.
So this got me looking for how to do debug output per-host. There doesn't
seem to be, but that got me to this posting:
And that made me notice that my router.db entry was corrupt (wrong device
So, typical user error. Thanks for (indirectly) getting me in the right
On Mon, 10 Jun 2019 at 00:22, Vacheslav Zouhairy <m_zouhairy at skno.by> wrote:
> Is there any bandwidth hog on those switches by any chance?
> On Fri, 2019-06-07 at 18:16 -0600, Michael Newton wrote:
> > Hi all, we manage about 200-300 Brocade ICX switches across a number
> > of locations. All but two are being successfully polled. The two in
> > question (same firmware and a similar config to the others)
> > consistently show "end of run not found" when run as part of the cron
> > job. But, when run manually for troubleshooting, everything seems to
> > work.
> > `sudo -u rancid flogin switchname` works fine and logs me into the
> > switch.
> > `sudo -u rancid flogin -c 'show version;show clock' switchname`
> > likewise works fine. Logs in, runs the commands, and logs out.
> > `sudo -u rancid rancid -t foundry -d switchname` runs through
> > everything perfectly. The switchname.new file has the expected
> > output.
> > Yet the log for the automated process consistently shows this:
> > switchname: End of run not found
> > end
> > Is there anything else I can do to troubleshoot this? Thanks in
> > advance!
> > Mike
> > _______________________________________________
> > Rancid-discuss mailing list
> > Rancid-discuss at shrubbery.net
> > http://www.shrubbery.net/mailman/listinfo/rancid-discuss
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Rancid-discuss