[rancid] [SPAM?] Cisco NX "chatty" with Power info

[Vacheslav Zouhairy]

what model of nexus is this?
On Thu, 2019-06-27 at 00:07 -0400, FF wrote:
> ok, 
> 
> So upgraded to 3.9 with the same behavior.
> 
> Built a cisco-nxp personality that had an | exclude OK line on it to
> remove the wattage line... but suddenly rancid couldn't log in to
> those units.
> Even though clogin would work fine. Went and modified the cisco-nx
> definition... but the exclude is ignored.
> 
> So now 2.3 and 3.9 behave identically in this situation...
> 
> This is the whole output for the section in question:
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Index: configs/10.10.10.114
> 
> ===================================================================
> 
> retrieving revision 1.1157
> 
> diff -u -4 -r1.1157 10.10.10.114
> 
> @@ -80,10 +80,10 @@
> 
>   !Env: Power                              Actual        Total
> 
>   !Env: Supply    Model                    Input     
> Capacity       Status
> 
>   !Env:                                    (Watts
> )     (Watts )
> 
>   !Env:
> -------  ----------  ---------------  ------ 
> ----------  --------------------
> 
> - !Env: 1       
> N9K-PAC-1200W-B                    
> 192 W      1200 W      Ok
> 
> - !Env: 2       
> N9K-PAC-1200W-B                    
> 174 W      1200 W      Ok
> 
> + !Env: 1       
> N9K-PAC-1200W-B                    
> 190 W      1200 W      Ok
> 
> + !Env: 2       
> N9K-PAC-1200W-B                    
> 176 W      1200 W      Ok
> 
>   !Env: Power Usage
> Summary:
> 
>   !Env:
> --------------------
> 
>   !Env: Power
> Supply redundancy mode (configured)                PS-Redundant
> 
>   !Env: Power
> Supply redundancy mode (operational)               PS-Redundant
> 
> 
> 
> 
> 
> 
>  
> Any suggestions?
> 
> Thanks in advance!
> 
> 
> 
> 
> On Mon, Mar 11, 2019 at 5:02 PM FF <fusionfoto at gmail.com> wrote:
> > Apparently I'm running a massively old version (2.3.8). I'll try
> > upgrading to 3.9 first.
> > 
> > thanks in advance
> > 
> > On Mon, Mar 11, 2019 at 4:47 PM heasley <heas at shrubbery.net> wrote:
> > > Fri, Mar 08, 2019 at 07:06:45PM +0000, Nick Nauwelaerts:
> > > 
> > > > what version of rancid & nx-os are you running?
> > > 
> > > 
> > > 
> > > good question.
> > > 
> > > 
> > > 
> > > if the answer is 3.9, please show us the complete output of show
> > > environment power
> > > 
> > > 
> > > 
> > > > i notice you only have 1 column less as me, you seem to miss
> > > "actual output".
> > > 
> > > > 
> > > 
> > > > 
> > > 
> > > > // nick
> > > 
> > > > 
> > > 
> > > > 
> > > 
> > > > 
> > > 
> > > > 
> > > 
> > > > From: Rancid-discuss [mailto:
> > > rancid-discuss-bounces at shrubbery.net] On Behalf Of FF
> > > 
> > > > Sent: Friday, March 8, 2019 18:05
> > > 
> > > > To: rancid-discuss at shrubbery.net
> > > 
> > > > Subject: [SPAM?] [rancid] Cisco NX "chatty" with Power info
> > > 
> > > > 
> > > 
> > > > 
> > > 
> > > > !Env: Power                              Actual        Total
> > > 
> > > > 
> > > 
> > > >   !Env: Supply    Model                    Input      Capacity 
> > >      Status
> > > 
> > > > 
> > > 
> > > >   !Env:                                    (Watts )     (Watts
> > > )
> > > 
> > > > 
> > > 
> > > >   !Env: -------  ----------  ---------------  ------  -------
> > > ---  --------------------
> > > 
> > > > 
> > > 
> > > > - !Env: 1        N9K-PAC-1200W-B                     180 W     
> > > 1200 W      Ok
> > > 
> > > > 
> > > 
> > > > + !Env: 1        N9K-PAC-1200W-B                     182 W     
> > > 1200 W      Ok
> > > 
> > > > 
> > > 
> > > >   !Env: 2        N9K-PAC-1200W-B                     162 W     
> > > 1200 W      Ok
> > > 
> > > > 
> > > 
> > > >   !Env: Power Usage Summary:
> > > 
> > > > 
> > > 
> > > > Every time Rancid runs, we get erroneous reports because the
> > > power usage fluctuates by 1-2 watts per run. Any suggestions on
> > > how to keep the good information (availability, etc) without
> > > getting this level of detail?
> > > 
> > > > 
> > > 
> > > > thanks in advance!
> > > 
> > > > 
> > > 
> > > > 
> > > 
> > > > --
> > > 
> > > > FF
> > > 
> > > > 
> > > 
> > > > ________________________________
> > > 
> > > > 
> > > 
> > > > Volg Aquafin op Facebook<https://www.facebook.com/AquafinNV> |
> > > Twitter<https://twitter.com/aquafinnv> | YouTube<
> > > http://www.youtube.com/channel/UCk_4P5BJ-MtEEDCkCsR_KqQ?feature=mhee
> > > > | LinkedIN<http://www.linkedin.com/company/aquafin/products> |
> > > Instagram<https://www.instagram.com/aquafin_nv/>
> > > 
> > > > 
> > > 
> > > > In het kader van de uitoefening van onze taken verzamelen we
> > > bij Aquafin persoonsgegevens. Hoe we omgaan met deze gegevens en
> > > wat de rechten van de betrokkenen zijn, kan je nalezen in onze
> > > privacy policy<https://www.aquafin.be/nl-be/privacy-policy>;.
> > > 
> > > > 
> > > 
> > > >   P Denk aan het milieu. Druk deze mail niet onnodig af.
> > > 
> > > 
> > > 
> > > > _______________________________________________
> > > 
> > > > Rancid-discuss mailing list
> > > 
> > > > Rancid-discuss at shrubbery.net
> > > 
> > > > http://www.shrubbery.net/mailman/listinfo/rancid-discuss
> > > 
> > > 
> > > 
> > 
> > -- 
> > FF
> 
> 
> _______________________________________________Rancid-discuss mailing
> listRancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20190627/f0d6c2ad/attachment.html>