[rancid] Rancid configuration - switches The following routers have not been successfully contacted for more than 24 hours.
Anwar Durrani
durrani.anwar at gmail.com
Thu Aug 31 09:22:43 UTC 2023
Hi Ugo,
Earlier My config file /etc/rancid/rancid.type.base looks like
##cisco;script;rancid -t cisco
##cisco;login;clogin
##cisco;module;ios
##cisco;inloop;ios::inloop
#cisco;command;ios::ShowVersion;show version
##cisco;command;ios::WriteTerm;show running-config
##cisco;command;ios::ShowVersion;show version;show running config
## -- end of config
I have added following
cisco;script;rancid -t cisco
cisco;login;clogin
cisco;module;ios
cisco;inloop;ios::inloop
cisco;command;ios::ShowVersion;show version
cisco;command;ios::ShowRedundancy;show redundancy secondary
cisco;command;ios::ShowIDprom;show idprom backplane
cisco;command;ios::ShowInstallActive;show install active
cisco;command;ios::ShowEnv;show env all
cisco;command;ios::ShowRSP;show rsp chassis-info
cisco;command;ios::ShowGSR;show gsr chassis
cisco;command;ios::ShowGSR;show diag chassis-info
cisco;command;ios::ShowBoot;show boot
cisco;command;ios::ShowBoot;show bootvar
cisco;command;ios::ShowBoot;show variables boot
cisco;command;ios::ShowFlash;show flash
cisco;command;ios::DirSlotN;dir /all nvram:
cisco;command;ios::DirSlotN;dir /all bootflash:
cisco;command;ios::DirSlotN;dir /all slot0:
cisco;command;ios::DirSlotN;dir /all disk0:
cisco;command;ios::DirSlotN;dir /all slot1:
cisco;command;ios::DirSlotN;dir /all disk1:
cisco;command;ios::DirSlotN;dir /all slot2:
cisco;command;ios::DirSlotN;dir /all disk2:
cisco;command;ios::DirSlotN;dir /all harddisk:
cisco;command;ios::DirSlotN;dir /all harddiska:
cisco;command;ios::DirSlotN;dir /all harddiskb:
cisco;command;ios::DirSlotN;dir /all sup-bootdisk:;c6500 sup32
cisco;command;ios::DirSlotN;dir /all sup-bootflash:;c6500 ios
cisco;command;ios::DirSlotN;dir /all sup-microcode:;c6500 ios
cisco;command;ios::DirSlotN;dir /all slavenvram:
cisco;command;ios::DirSlotN;dir /all slavebootflash:
cisco;command;ios::DirSlotN;dir /all slaveslot0:
cisco;command;ios::DirSlotN;dir /all slavedisk0:
cisco;command;ios::DirSlotN;dir /all slaveslot1:
cisco;command;ios::DirSlotN;dir /all slavedisk1:
cisco;command;ios::DirSlotN;dir /all slaveslot2:
cisco;command;ios::DirSlotN;dir /all slavedisk2:
cisco;command;ios::DirSlotN;dir /all slavesup-bootflash:;c7600
cisco;command;ios::DirSlotN;dir /all sec-nvram:
cisco;command;ios::DirSlotN;dir /all sec-bootflash:
cisco;command;ios::DirSlotN;dir /all sec-slot0:
cisco;command;ios::DirSlotN;dir /all sec-disk0:
cisco;command;ios::DirSlotN;dir /all sec-slot1:
cisco;command;ios::DirSlotN;dir /all sec-disk1:
cisco;command;ios::DirSlotN;dir /all sec-slot2:
cisco;command;ios::DirSlotN;dir /all sec-disk2:
cisco;command;ios::ShowContAll;show controllers
cisco;command;ios::ShowContCbus;show controllers cbus
cisco;command;ios::ShowDiagbus;show diagbus
cisco;command;ios::ShowDiag;show diag
cisco;command;ios::ShowCapture;show capture;ASA/PIX
cisco;command;ios::ShowModule;show module;c6500 ios
cisco;command;ios::ShowSpeVersion;show spe version
cisco;command;ios::ShowC7200;show c7200
cisco;command;ios::ShowInventory;show inventory raw
cisco;command;ios::ShowVTP;show vtp status
cisco;command;ios::ShowVLAN;show vlan
cisco;command;ios::ShowVLAN;show vlan-switch
cisco;command;ios::ShowDetail;show switch detail
cisco;command;ios::ShowSDM;show sdm prefer
cisco;command;ios::ShowMTU;show system mtu
cisco;command;ios::ShowDebug;show debug
cisco;command;ios::ShowShun;show shun;ASA/PIX
cisco;command;ios::WriteTerm;more system:running-config;ASA/PIX
#cisco;command;ios::WriteTerm;show running-config view full;workaround for
role-based CLI
cisco;command;ios::WriteTerm;show running-config
cisco;command;ios::WriteTerm;write term
I haven't received any error as of now, generally error triggered in a
couple of days.
On Tue, 29 Aug 2023 at 11:27, Anwar Durrani <durrani.anwar at gmail.com> wrote:
> I am sorry, let me re-phrase, it is not with 1-2 switches but all
> switches.
>
> On Mon, 28 Aug 2023 at 20:27, Anwar Durrani <durrani.anwar at gmail.com>
> wrote:
>
>> Hi Ugo,
>> I did not find any significant difference between working and non-working
>> configurations,
>> but for some of the switch rancid user locally present on working, and at
>> the same time rancid user is not present on one of the working switches as
>> well, I don't think so if this is the case.
>>
>> When i run rancid -t cisco switch1.xx.xx.com through switch10.xx.xx.com,
>> it always gives me "switch10.xx.xx.com: End of run not found"
>> Thanks
>>
>> On Sat, 26 Aug 2023 at 16:28, Ugo Bellavance <ugob at lubik.ca> wrote:
>>
>>> Did you read the logs on one non-working switch and compare with a
>>> working one?
>>>
>>> On Sat, Aug 26, 2023, 00:05 Anwar Durrani <durrani.anwar at gmail.com>
>>> wrote:
>>>
>>>> Yes I did, It runs successfully and exits properly. This is
>>>> happening with 3 switches only, I have 10 switches for other switches there
>>>> is no complaint.
>>>>
>>>> On Sat, 26 Aug 2023 at 00:32, Ugo Bellavance <ugob at lubik.ca> wrote:
>>>>
>>>>> Did you try running the clogin script manually?
>>>>>
>>>>> On Fri, Aug 25, 2023 at 2:15 AM Anwar Durrani <durrani.anwar at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> I have checked the logs it says
>>>>>> switch01.x.x.x.com: End of run not found
>>>>>>
>>>>>> On Tue, 1 Aug 2023 at 04:37, Ugo Bellavance <ugob at lubik.ca> wrote:
>>>>>>
>>>>>>> Check your logs.
>>>>>>>
>>>>>>> On Mon, Jul 31, 2023 at 4:51 AM Anwar Durrani <
>>>>>>> durrani.anwar at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi Team,
>>>>>>>> I have added Cisco switches in Rancid, backup is taking place
>>>>>>>> properly but every 2 days, I am getting the following routers have not been
>>>>>>>> successfully contacted message, to resolve this issue I have to run the
>>>>>>>> following command
>>>>>>>>
>>>>>>>> cd /var/lib/rancid/
>>>>>>>>
>>>>>>>> rm -rf switches/
>>>>>>>>
>>>>>>>> /usr/lib/rancid/bin/rancid-cvs
>>>>>>>>
>>>>>>>> A switches/.cvsignore
>>>>>>>>
>>>>>>>> A switches/configs
>>>>>>>>
>>>>>>>> A switches/configs/.cvsignore
>>>>>>>>
>>>>>>>>
>>>>>>>> A switches/configs/switch2.xxxx.com
>>>>>>>>
>>>>>>>> A switches/configs/switch7.xxxx.com
>>>>>>>>
>>>>>>>> A switches/configs/switch8.xxxx.xxxx.xxxx.com
>>>>>>>>
>>>>>>>> A switches/configs/switch9-xxxx.com
>>>>>>>>
>>>>>>>> A switches/configs/switch5.xxxx.com
>>>>>>>>
>>>>>>>> A switches/router.db
>>>>>>>>
>>>>>>>> U switches
>>>>>>>>
>>>>>>>> Checked out revision 50872.
>>>>>>>>
>>>>>>>> Updating '.':
>>>>>>>>
>>>>>>>> At revision 50872.
>>>>>>>>
>>>>>>>> --
>>>>>>>> Thanks & regards,
>>>>>>>> Anwar M. Durrani
>>>>>>>> +91-9923205011
>>>>>>>> <http://in.linkedin.com/pub/anwar-durrani/20/b55/60b>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Rancid-discuss mailing list
>>>>>>>> Rancid-discuss at www.shrubbery.net
>>>>>>>> https://www.shrubbery.net/mailman/listinfo/rancid-discuss
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Ugo Bellavance (ugob at lubik.ca)
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Thanks & regards,
>>>>>> Anwar M. Durrani
>>>>>> +91-9923205011
>>>>>> <http://in.linkedin.com/pub/anwar-durrani/20/b55/60b>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Ugo Bellavance (ugob at lubik.ca)
>>>>>
>>>>
>>>>
>>>> --
>>>> Thanks & regards,
>>>> Anwar M. Durrani
>>>> +91-9923205011
>>>> <http://in.linkedin.com/pub/anwar-durrani/20/b55/60b>
>>>>
>>>>
>>>>
>>
>> --
>> Thanks & regards,
>> Anwar M. Durrani
>> +91-9923205011
>> <http://in.linkedin.com/pub/anwar-durrani/20/b55/60b>
>>
>>
>>
>
> --
> Thanks & regards,
> Anwar M. Durrani
> +91-9923205011
> <http://in.linkedin.com/pub/anwar-durrani/20/b55/60b>
>
>
>
--
Thanks & regards,
Anwar M. Durrani
+91-9923205011
<http://in.linkedin.com/pub/anwar-durrani/20/b55/60b>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20230831/d01f853a/attachment.htm>
More information about the Rancid-discuss
mailing list