[tac_plus] tac_plus process automatically shutdown after too many login

Hailu Meng hailumeng at gmail.com
Fri Apr 2 16:21:52 UTC 2010


Hi there,

I recently setup Ciscoworks to backup the cisco device configuration every
day. Right now I configured 126 devices in CiscoWorks to be back up. But
after Ciscoworks finished the scheduled backup job, I found my tac_plus
process has been stopped automatically. I checked the tac_plus log and found
the end of log file has one error:
Fri Apr  2 08:20:28 2010 [3417]: Error 10.x.x.x: Bad sequence number 3
should be even
what does it mean?

Some devices got successfully telneted and get into the enable mode. But
some devices failed. In addition, I found the below error, it seems the
device is not reachable but the device didn't have any issue at that time.
Is there any possiblity that the unexpected delay cause this issue? Can I
adjust some kind of timeout parameter in tac_plus to be suitable for the
situation?

Fri Apr  2 08:20:24 2010 [3417]: Authen Start request
Fri Apr  2 08:20:24 2010 [3417]: choose_authen returns 1
Fri Apr  2 08:20:24 2010 [3417]: Writing AUTHEN/GETUSER size=55
Fri Apr  2 08:20:24 2010 [3417]: PACKET: key=tac_key
Fri Apr  2 08:20:24 2010 [3417]: version 192 (0xc0), type 1, seq no 2, flags
0x1
Fri Apr  2 08:20:24 2010 [3417]: session_id 1720821293 (0x6691a62d), Data
length 43 (0x2b)
Fri Apr  2 08:20:24 2010 [3417]: End header
Fri Apr  2 08:20:24 2010 [3417]: type=AUTHEN status=4 (AUTHEN/GETUSER)
flags=0x0
Fri Apr  2 08:20:24 2010 [3417]: msg_len=37, data_len=0
Fri Apr  2 08:20:24 2010 [3417]: msg:
Fri Apr  2 08:20:24 2010 [3417]:  0xa User Access Verification 0xa
Fri Apr  2 08:20:24 2010 [3417]: data:
Fri Apr  2 08:20:24 2010 [3417]: End packet
Fri Apr  2 08:20:24 2010 [3417]: Waiting for packet
Fri Apr  2 08:20:24 2010 [3417]: 10.x.x.x: exception on fd 6
Fri Apr  2 08:20:24 2010 [3417]: Read -1 bytes from 10.x.x.x tty1, expecting
12
Fri Apr  2 08:20:24 2010 [3417]: Error 10.x.x.x tty1: Null reply packet,
expecting CONTINUE
Fri Apr  2 08:20:24 2010 [3417]: 10.x.x.x: disconnect

Appreciated for your help!  Thanks!

Lou
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/tac_plus/attachments/20100402/8d493c05/attachment.html 


More information about the tac_plus mailing list