From: "Otchere, Kofi" <Kofi.Otchere@bskyb.com>
To: "'rancid-discuss@shrubbery.net'" <rancid-discuss@shrubbery.net>
Subject: I need some help ?
Date: Fri, 14 Mar 2003 09:50:53 -0000

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01C2EA0F.340CAC50
Content-Type: text/plain

Hello,
 
I need some help in adding more commands in the script that runs on the
router and the switch.  Also, is it possible to use Cisco Pix?
 
Please help
 
Regards
 

Sky

Kofi Otchere

Networks Engineer 

Sky Interactive

British Sky Broadcasting Ltd           T 020 7585 4744 

Grant Way, Isleworth                      F 020 7585 4759

Middlesex TW7  5GQ                     M 07803 024333

sky.com                                        E kofi.otchere@bskyb.com

 

 

From: john heasley <heas@shrubbery.net>
To: "Otchere, Kofi" <Kofi.Otchere@bskyb.com>
Cc: "'rancid-discuss@shrubbery.net'" <rancid-discuss@shrubbery.net>
Subject: Re: I need some help ?
Date: Fri, 14 Mar 2003 09:48:40 -0800
Message-ID: <20030314174840.GB9482@shrubbery.net>
References: <C7D4228F0032994990FDA95AF13D7E21032B8351@duncan.skyactive.bskyb.com>
In-Reply-To: <C7D4228F0032994990FDA95AF13D7E21032B8351@duncan.skyactive.bskyb.com>

Fri, Mar 14, 2003 at 09:50:53AM -0000, Otchere, Kofi:
> Hello,
>  
> I need some help in adding more commands in the script that runs on the
> router and the switch.  Also, is it possible to use Cisco Pix?

Currently, bin/rancid will have to be modified to do this.

there are is a hash and an array that have to be modified.

%commands=(
        'show version'          => "ShowVersion",
        'show redundancy secondary'             => "ShowRedundancy",
		...

this associates a command with a filtering routine.

@commands=(
        "show version",
        "show redundancy secondary",
		...

this establishes the order in which commands are executed.


From: "Strina Nicolas" <nicolas.strina@smart-telecom.ch>
To: <rancid-discuss@shrubbery.net>
Subject: 
Date: Wed, 26 Mar 2003 09:45:10 +0100
Message-ID: <OCEMKIFHGHENILHJAOCCKEDNDBAA.nicolas.strina@smart-telecom.ch>

Hello,

I've just installed Rancid on a Linux BOX, and when i am doing the do-diffs
i have a problem with some CISCO commands not listed in the IOS:

=====================================
Getting missed routers: round 4.
ir00.pul.lsn.lb0.ch.vtxnet.net: missed cmd(s): show bootvar,dir /all
sup-microcode:,show boot,show vlan,dir /all slot0:,show c7200,show
module,dir /all slot1:,write term,dir /all sup-bootflash:,dir /all
nvram:,dir /all slot2:,show diag,show controllers cbus,show env all,dir /all
disk0:,dir /all disk1:,show vtp status,dir /all disk2:,show gsr chassis,show
variables boot,show controllers,dir /all bootflash:,show diagbus,show
flash,show install active
ir00.pul.lsn.lb0.ch.vtxnet.net: End of run not found
!ROM Bootstrap: Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Is there any possibilities to disable these commands ? Or is it working
anyway ?

Regards,

Nicolas

----------------------------------------
STRINA Nicolas
IP Network Engineer
VTX Services - Internet Service Provider
Av. de Lavaux, 101 CH-1009 Pully
nicolas.strina@smart-telecom.ch
http://www.vtx.ch
----------------------------------------


From: "Rizzo, Joe" <JRizzo@ea.com>
To: "Strina Nicolas" <nicolas.strina@smart-telecom.ch>,
   <rancid-discuss@shrubbery.net>
Subject: RE: 
Date: Wed, 26 Mar 2003 05:10:01 -0800
Message-ID: <194487E5B6AC1E4E82FCBD56E5799791BC66A2@eahq-mb3.rws.ad.ea.com>
X-OriginalArrivalTime: 26 Mar 2003 13:10:02.0564 (UTC) FILETIME=[02FF8040:01C2F399]

Unsupported commands are not a big deal.  The 'End of run not found' is
not good however.

Set 'NOPIPE=YES; export NOPIPE' in <rancid dir>/bin/env.  Then run
do-diffs.  A file will be created with the exact output form rancid.
The file will be called <router name>.raw  Review this file to determine
why there is not a 'end' to the 'write term' command.

Hope this helps,
Joe

-----Original Message-----
From: Strina Nicolas [mailto:nicolas.strina@smart-telecom.ch] 
Sent: Wednesday, March 26, 2003 2:45 AM
To: rancid-discuss@shrubbery.net
Subject: 

Hello,

I've just installed Rancid on a Linux BOX, and when i am doing the
do-diffs
i have a problem with some CISCO commands not listed in the IOS:

=====================================
Getting missed routers: round 4.
ir00.pul.lsn.lb0.ch.vtxnet.net: missed cmd(s): show bootvar,dir /all
sup-microcode:,show boot,show vlan,dir /all slot0:,show c7200,show
module,dir /all slot1:,write term,dir /all sup-bootflash:,dir /all
nvram:,dir /all slot2:,show diag,show controllers cbus,show env all,dir
/all
disk0:,dir /all disk1:,show vtp status,dir /all disk2:,show gsr
chassis,show
variables boot,show controllers,dir /all bootflash:,show diagbus,show
flash,show install active
ir00.pul.lsn.lb0.ch.vtxnet.net: End of run not found
!ROM Bootstrap: Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)

Is there any possibilities to disable these commands ? Or is it working
anyway ?

Regards,

Nicolas

----------------------------------------
STRINA Nicolas
IP Network Engineer
VTX Services - Internet Service Provider
Av. de Lavaux, 101 CH-1009 Pully
nicolas.strina@smart-telecom.ch
http://www.vtx.ch
----------------------------------------



From: john heasley <heas@shrubbery.net>
To: "Rizzo, Joe" <JRizzo@ea.com>
Cc: Strina Nicolas <nicolas.strina@smart-telecom.ch>,
   rancid-discuss@shrubbery.net
Subject: Re:
Date: Wed, 26 Mar 2003 13:18:51 -0800
Message-ID: <20030326211851.GM20752@shrubbery.net>
References: <194487E5B6AC1E4E82FCBD56E5799791BC66A2@eahq-mb3.rws.ad.ea.com>
Mime-Version: 1.0

Wed, Mar 26, 2003 at 05:10:01AM -0800, Rizzo, Joe:
> Unsupported commands are not a big deal.  The 'End of run not found' is
> not good however.
> 
> Set 'NOPIPE=YES; export NOPIPE' in <rancid dir>/bin/env.  Then run
> do-diffs.  A file will be created with the exact output form rancid.
> The file will be called <router name>.raw  Review this file to determine
> why there is not a 'end' to the 'write term' command.
> 
> Hope this helps,
> Joe

you also need to specify the '-d' option to rancid, else this file
will be deleter.

another useful data-point is what appears at the end of the <router name>.new
file.  this will provide clues as to what command's output and maybe what
within that output caused the heart-burn.

given the first command in the missed list is show bootvar, i suspect it
is 'show boot' that triggered it.  what o/p do you get from this command?

> -----Original Message-----
> From: Strina Nicolas [mailto:nicolas.strina@smart-telecom.ch] 
> Sent: Wednesday, March 26, 2003 2:45 AM
> To: rancid-discuss@shrubbery.net
> Subject: 
> 
> Hello,
> 
> I've just installed Rancid on a Linux BOX, and when i am doing the
> do-diffs
> i have a problem with some CISCO commands not listed in the IOS:
> 
> =====================================
> Getting missed routers: round 4.
> ir00.pul.lsn.lb0.ch.vtxnet.net: missed cmd(s): show bootvar,dir /all
> sup-microcode:,show boot,show vlan,dir /all slot0:,show c7200,show
> module,dir /all slot1:,write term,dir /all sup-bootflash:,dir /all
> nvram:,dir /all slot2:,show diag,show controllers cbus,show env all,dir
> /all
> disk0:,dir /all disk1:,show vtp status,dir /all disk2:,show gsr
> chassis,show
> variables boot,show controllers,dir /all bootflash:,show diagbus,show
> flash,show install active
> ir00.pul.lsn.lb0.ch.vtxnet.net: End of run not found
> !ROM Bootstrap: Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE
> (fc1)
> 
> Is there any possibilities to disable these commands ? Or is it working
> anyway ?
> 
> Regards,
> 
> Nicolas
> 
> ----------------------------------------
> STRINA Nicolas
> IP Network Engineer
> VTX Services - Internet Service Provider
> Av. de Lavaux, 101 CH-1009 Pully
> nicolas.strina@smart-telecom.ch
> http://www.vtx.ch
> ----------------------------------------
>