Preface |
This book describes how to configure the dmfe (Fast Ethernet) device driver for the Davicom (R) DM9102A devices in the Netra X1 and Sun Fire V100 Servers.
Chapter 1 describes the dmfe device driver for the Davicom (R) DM9102A device .
Chapter 2 describes how to set the dmfe device driver parameter values temporarily by using the ndd utility or permanently by editing the dmfe.conf file.
Chapter 3 describes how to set parameters for the dmfe device to enable you to boot from the network if you have connected your Netra X1 or Sun Fire V100 server to an Ethernet hub that does not support auto-negotiation.
Appendix A lists the parameters for the dmfe device driver.
Appendix B describes the application programming interface for the dmfe driver.
This document may not contain information on basic UNIX® commands and procedures such as shutting down the system, booting the system, and configuring devices.
See one or more of the following for this information:
The names of commands, files, and directories; on-screen computer output |
||
What you type, when contrasted with on-screen computer output |
||
Read Chapter 6 in the User's Guide . |
||
The docs.sun.comSM web site enables you to access Sun technical documentation on the Web. You can browse the docs.sun.com archive or search for a specific book title or subject at: http://www.docs.sun.com
We are interested in improving our documentation and welcome your comments and suggestions. You can email your comments to us at:
Please include the part number (816-2128-11) of this document in the subject line of your email.
Copyright © 2002, Sun Microsystems, Inc. All rights reserved.