SRDB ID |
|
Synopsis |
|
Date |
18036 |
|
GBICs are not seen on a E450 & E250 |
|
5 Sep 2002 |
Symptom:
The FC-AL PCI card, FC100/p, Part Number 375-0040 is not seen by the Operation System.
However the FC-AL PCI card, FC100/p can be seen at the OBP.
Keywords: hardware, GBIC, fcal, fiber, fibre, Solaris, OBP
SOLUTION SUMMARY:
Solution:
The FC-AL PCI card is supported in the following machines running Solaris 2.6 or later:
A20 - Ultra 450
A25 - Ultra Enterprise 450
A26 - Enterprise 250
In addition, the fcal packages must be installed from the cdrom
part number 704-6180 (Fiber Channel PCI FC-AL software) which
is shipped with the hardware.
Packages are:
SUNWifp Sun Fibre Channel Arbitrated Loop Device Driver
SUNWifph Sun Fibre Channel Arbitrated Loop Driver Header Files
SUNWvtsfp SunVTS IFP Controller Test
Below are outlined steps needed to install the drivers.
Insert Fiber Channel PCI FC-AL software cdrom.
# cd /cdrom/cdrom0
# cd Product
# su
# pkgadd -d .
The following packages are available:
1 SUNWifp Sun Fibre Channel Arbitrated Loop Device Driver
(sparc) 11.6,REV=1998.03.09.22.27
2 SUNWifph Sun Fibre Channel Arbitrated Loop Driver Header Files
(sparc) 11.6,REV=1998.03.09.22.27
3 SUNWvtsfp SunVTS IFP Controller Test
(sparc) 2.1.2,REV=12.98.01.30
Select all packages and install
Reboot system
For more information please reference the Installation Manual, part number 805-3682
SUBMITTER: Dan Auga
APPLIES TO: Hardware, Hardware/Disk Storage Subsystem/StorEdge Disk Array/StorEdge A5000, Operating Systems/Solaris/Solaris 2.6, AFO Vertical Team Docs/Hardware
ATTACHMENTS:
Copyright (c) 1997-2003 Sun Microsystems, Inc.