SRDB ID   Synopsis   Date
21393   Recovering from a Netra t1 CDROM Failure   27 Dec 1999

Status Issued

Description
Netra t1 machines may have a problem booting from cdrom. An error you might 
see is "bad label".  
SOLUTION SUMMARY:
Here is the combined fix:

1. Reseat the CDROM cable at both ends.

The next step is key to this procedure.  
2. From the ok prompt:
   OK setenv auto-boot? false
   OK set-defaults
   OK reset-all

3. OK boot cdrom -s
   When the machine gets to the '#' prompt type 'exit' and this should start 
   the installation program.


If booting from CDROM still fails after trying all these steps, a new CDROM kit
should be ordered. The part # is 540-4358 this includes the CDROM
drive and cable.

SUBMITTER: David Mariotto APPLIES TO: Hardware/Disk Storage Subsystem/Telecom Storage, Operating Systems/Solaris/Solaris 2.x ATTACHMENTS:


Copyright (c) 1997-2003 Sun Microsystems, Inc.