Installation of Solaris 2.6 HW 5/98 on a Netra t1 105 will fail unless the
image has kernel patch 105181-XX (-10 or above) applied. 

Sample Error Message:

ok boot net
Resetting ... 

Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.24 ME, 256 MB memory installed, Serial #11094363.
Ethernet address 8:0:20:a9:49:5b, Host ID: 80a9495b.

Executing last command: boot net                                      
Boot device: /pci@1f,0/pci@1,1/network@3,1  File and args: 
2ec00 hostname: <hostname>
domainname: sun.com
root server: <server name>
root directory:
/export/install/media/sol_2_6_hw3_sparc/Solaris_2.6/Tools/Boot
SunOS Release 5.6 Version Generic_105181-05 [UNIX(R) System V Release
4.0]
Copyright (c) 1983-1997, Sun Microsystems, Inc.
SUNW,hme0: Link Down - cable problem?
SUNW,hme0: Link Down - cable problem?
SUNW,hme0: Link Down - cable problem?
SUNW,hme0: Link Down - cable problem?
SUNW,hme0: Link Down - cable problem?
SUNW,hme0: Link Down - cable problem?

            

To prevent this, the Operating Environment Installation CD (OECD) p/n 
704-6914-10 must be used.  Complete procedures are documented in the manual
"Installing Solaris 2.5.1 or Solaris 2.6 Software on 419+ MHz Systems"
(p/n 806-2156-10 - also included with the OECD).

The recommended solution for this problem is to create a JumpStart install
server containing the Solaris 2.6 HW 5/98 image patched via the 
modify_install_server script from the OECD.  
Look for the OECD and documentation in the shrink wrapped packet 
that says "Binary Code License".   

NOTE: Variations on previous releases of the Operating Environment Installation 
CD:

704-6657-10 April 1999:

This version does not contain a modify_install_server script to patch a 
JumpStart image nor will it install in text mode.

704-6657-11 May 1999

This version will not install in text mode, a graphic interface is required.