Proposed Extreme changes.

[Alex Bochannek]

It's not causing any problems (that I know of), but I just don't like
sending invalid commands to devices :)

Alex Bochannek 
Senior Unix/Network Engineer 
Yipes ... that's fast! 
(415) 901-2000 
(415) 901-2090 (direct) 
www.yipes.com
 

 -----Original Message-----
From: 	'john heasley' [mailto:heas at shrubbery.net] 
Sent:	Wednesday, October 17, 2001 7:19 PM
To:	Alex Bochannek
Cc:	'john heasley'; rancid-discuss at guelah.shrubbery.net
Subject:	Re: Proposed Extreme changes.

Wed, Oct 17, 2001 at 02:31:25PM -0700, Alex Bochannek:
> OK, I am testing the new version and have a couple of problems with it. I
am
> working on trying to figure out why "show config" on Extreme doesn't seem
to
> complete sometimes and I will probably have some time to look into this
> tomorrow.
> 
> The other issue is "show diagnostics" on Extreme. Apparently this command
> does not exist on Alpines or pre-6.1.7 BDs. It does exist on all Extreme
> devices supported in 6.2.0 and pre-inferno devices. So, it works with
non-I
> Summits and current rev BDs. John, how do you want to handle this? 

this shouldnt cause a problem, though some of the useful data may be
missing.  why is it a problem?  for example

#RANCID-CONTENT-TYPE: extreme
#
#Chassis type: Alpine3804
#
#System Serial Number: 802009-01  0022X-00030
#CPU Serial Number: 702001-05  0021S-01000 CPLD Rev 03
#Baseboard Serial Number: 702008-03  0025B-00022 CPLD Rev 03
#
#Memory: 268435456 (256MB)
#
#Power: Upper (PSU-A)  45012  4300-00007  03  0022J-01355
#Power: Lower (PSU-B)  
#
#Image: Extremeware Version 6.2.0 (Build 60) 
#Image: License:        Full L3 + Security.
#Image: selected:       secondary
#Image: booted:         secondary
#Image: Primary Software version:       x.x
#Image: Secondary software version:     x.x
#
#Bootrom: 7.2
#
#
#
#Slot 1: type GM4SX, GM4X/GM4SX
#Slot 1: serial 702005-06-0025S00877
#Slot 1: state  Operational
#
#Slot 2: type GM4SX, GM4X/GM4SX
#Slot 2: serial 702005-06-0021S00131
#Slot 2: state  Operational
#
#Slot 3: type FM32, FM32
#Slot 3: serial 702009-06-0024S00170
#Slot 3: state  Operational
#
#Slot 4: type FM32, FM32
#Slot 4: serial 702009-06-0024S00319
#Slot 4: state  Operational
#
configure slot 1 module gm4x
configure slot 2 module gm4x
configure slot 3 module fm32t
configure slot 4 module fm32t
#