Proposed Extreme changes.

['john heasley']

Thu, Oct 18, 2001 at 02:19:02PM -0700, Alex Bochannek:
> It's not causing any problems (that I know of), but I just don't like
> sending invalid commands to devices :)

i dont believe this is problematic, though we should recognize the
"bad cmd" response which i believe is:

	/^Syntax error at token/

if they've managed to keep at least that much consistent.  without
doing such commands, we'd need sparate scripts for every family and
each OS revision just to collect the info; eg: for cisco we'd need
cat 5000, cat 4000, gsr, 7200, 36xx, 7[05]xx, ....

> Alex Bochannek 
> Senior Unix/Network Engineer 
> Yipes ... that's fast! 
> (415) 901-2000 
> (415) 901-2090 (direct) 
> www.yipes.com
>  
> 
>  -----Original Message-----
> From: 	'john heasley' [mailto:heas at shrubbery.net] 
> Sent:	Wednesday, October 17, 2001 7:19 PM
> To:	Alex Bochannek
> Cc:	'john heasley'; rancid-discuss at guelah.shrubbery.net
> Subject:	Re: Proposed Extreme changes.
> 
> Wed, Oct 17, 2001 at 02:31:25PM -0700, Alex Bochannek:
> > OK, I am testing the new version and have a couple of problems with it. I
> am
> > working on trying to figure out why "show config" on Extreme doesn't seem
> to
> > complete sometimes and I will probably have some time to look into this
> > tomorrow.
> > 
> > The other issue is "show diagnostics" on Extreme. Apparently this command
> > does not exist on Alpines or pre-6.1.7 BDs. It does exist on all Extreme
> > devices supported in 6.2.0 and pre-inferno devices. So, it works with
> non-I
> > Summits and current rev BDs. John, how do you want to handle this? 
> 
> this shouldnt cause a problem, though some of the useful data may be
> missing.  why is it a problem?  for example
> 
> #RANCID-CONTENT-TYPE: extreme
> #
> #Chassis type: Alpine3804
> #
> #System Serial Number: 802009-01  0022X-00030
> #CPU Serial Number: 702001-05  0021S-01000 CPLD Rev 03
> #Baseboard Serial Number: 702008-03  0025B-00022 CPLD Rev 03
> #
> #Memory: 268435456 (256MB)
> #
> #Power: Upper (PSU-A)  45012  4300-00007  03  0022J-01355
> #Power: Lower (PSU-B)  
> #
> #Image: Extremeware Version 6.2.0 (Build 60) 
> #Image: License:        Full L3 + Security.
> #Image: selected:       secondary
> #Image: booted:         secondary
> #Image: Primary Software version:       x.x
> #Image: Secondary software version:     x.x
> #
> #Bootrom: 7.2
> #
> #
> #
> #Slot 1: type GM4SX, GM4X/GM4SX
> #Slot 1: serial 702005-06-0025S00877
> #Slot 1: state  Operational
> #
> #Slot 2: type GM4SX, GM4X/GM4SX
> #Slot 2: serial 702005-06-0021S00131
> #Slot 2: state  Operational
> #
> #Slot 3: type FM32, FM32
> #Slot 3: serial 702009-06-0024S00170
> #Slot 3: state  Operational
> #
> #Slot 4: type FM32, FM32
> #Slot 4: serial 702009-06-0024S00319
> #Slot 4: state  Operational
> #
> configure slot 1 module gm4x
> configure slot 2 module gm4x
> configure slot 3 module fm32t
> configure slot 4 module fm32t
> #