[rancid] Re: folded lines

[Lance Vermilion]

On Tue, Oct 31, 2006 at 09:28:28PM -0800, William Yardley wrote:
> I have a Cisco 4948 and RANCID is repeatedly noticing the following
> difference: (squished down the columns a little to be a bit easier to
> read)
> 
>   !VLAN: VLAN Name           Status   Ports
>   !VLAN: ---- -------------- -------- -------------------------------
> 
> - !VLAN: 1    default        active   Gi1/1, Gi1/2, Gi1/3, Gi1/4
> - !VLAN:                              Gi1/5, Gi1/6, Gi1/9, Gi1/10
> - !VLAN:                              Gi1/11, Gi1/13, Gi1/14, Gi1/15
> - !VLAN:                              Gi1/17, Gi1/18, Gi1/19, Gi1/21
> - !VLAN:                              Gi1/22, Gi1/23, Gi1/24, Gi1/25
> - !VLAN:                              Gi1/27, Gi1/29, Gi1/30, Gi1/31
> - !VLAN:                              Gi1/33, Gi1/35, Gi1/37, Gi1/39
> - !VLAN:                              Gi1/41, Gi1/42, Gi1/43, Gi1/44
> + !VLAN: 1    default        active   Gi1/1, Gi1/2, Gi1/3, Gi1/4, Gi1/5, Gi1/6, Gi1/9, Gi1/10, Gi1/11, Gi1/13, Gi1/14, Gi1/15, Gi1/17,
> Gi1/18, Gi1/19, Gi1/21, Gi1/22, Gi1/23, Gi1/24, Gi1/25, Gi1/27, Gi1/29, Gi1/30, Gi1/31, Gi1/33, Gi1/35, Gi1/37, Gi1/39, Gi1/41, Gi1/42, Gi1/43, Gi1/44
>   !VLAN: 20   VLAN0020                         active    Gi1/45, Gi1/46, Gi1/47, Gi1/48
> 
> Each time it runs, the version that gets committed flip-flops. Am I
> missing something obvious?
> 
> w
> 
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

I have that same problem. Anyone else solved this problem other than ignoring !VLAN lines?
-- 

-Lance <rancid at gheek.net>