[rancid] Re: VTP

[Johan Bergström]

On Mon, 2006-11-27 at 11:52 -0800, john heasley wrote:
> >  
> > The important information for me is VTP Operating Mode,
> > VTP Domain Name and VTP Traps Generation
> 
> show vtp status was added a long time ago.  and, I expect the commands to
> alter it would appear in show running (excepting the 'defaults' which
> cisco may change at their whim).
> 
> > The commands I use to setup my vtp are 'vtp domain VTP_DOMAIN' and 'vtp
> > mode server(or client or transparent)' on some switches/routers where I
> > want vtp traps, I enable that with 'snmp-server enable traps vtp' the
> > snmp-server command is shown in 'sh run', so it's cought with rancid
> > already.
> > 
> > The other VTP commands are set with 'vtp pruning', 'vtp version <1|2>'
> 
> all of these should appear in the show running output.  either you're
> running a very old version, have the device configured as "cat5", or
> ???

It doesn't show vtp domain or vtp mode in show running, I'm using the
following versions,

4500,
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M),
Version 12.2(25)EWA6, RELEASE SOFTWARE (fc1)

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version
12.2(18)EW1, RELEASE SOFTWARE (fc1)

6500,
IOS (tm) s72033_rp Software (s72033_rp-PK9S-M), Version 12.2(17d)SXB3,
RELEASE SOFTWARE (fc1)

3750,

Cisco IOS Software, C3750 Software (C3750-IPBASE-M), Version
12.2(25)SEE2, RELEASE SOFTWARE (fc1)

And I'm running my devices as cisco in rancid.

> > 
> > On Fri, 2006-11-24 at 20:47 -0800, john heasley wrote:
> > > Thu, Nov 23, 2006 at 08:22:09AM +0100, Johan Bergstr?m:
> > > > Why doesn't rancid pick out vtp information and save it ?
> > > > 
> > > > It would definitely be useful, since I have quite a large network and it
> > > > would be easier to be able to tell my co-workers who aren't very used to
> > > > playing around with communication devices just to "download" a
> > > > configuration file from the rancid cvs archive and copy&paste if they
> > > > need to replace the supervisor card. But as it is today, they have to
> > > > type in the vtp commands separately.
> > > > 
> > > > Oh and this is all cisco devices. mostly 4500s and 3750s and a bunch of
> > > > 6500s too.
> > > > 
> > > 
> > > Where is this data?  Example?