[rancid] Re: Fwd: Dell Powerconnects

[Lance]

Login to the box via ssh tom at 172.16.10.161. After getting logged in
enable. Then log off. Then use a login script to attempt to connect to
the same box "172.16.10.161". Make sure to capture all the output from
all of that then post back to the list and we might be able to help
more.

After this we can then try to debug if it is not clear enough...assuming
the login script you are using supports the debug switch.

-lance

> -------- Original Message --------
> Subject: [rancid] Re: Fwd: Dell Powerconnects
> From: PhaNtoX <phantox at gmail.com>
> Date: Fri, November 02, 2007 8:25 am
> To: rancid-discuss at shrubbery.net
> Setup ssh on the switch, verifed I can ssh into the switch with the user and
> password from the rancid box.  However when i try to manually kick off
> srancid or rancid-run im still getting on the switch. If i try kicking off
> flogin it connects fine however, I also modified srancid to try to use
> flogin vs hlogin that actually logs into the switch but fails to go anywhere
> else. Any other idea's
>  "new ssh connection for user unKnown, source 172.16.10.160 (rancid box)"
> add autoenable 172.16.10.161 1
> add method 172.16.10.161 ssh
> add user 172.16.10.161 admin
> add password 172.16.10.161 password
> On 11/2/07, Lance <rancid at gheek.net> wrote:
> >
> >
> > It looks like ssh is denied or you have the wrong username/password.
> > Make sure you can ssh with that username and password from the same
> > machine you are running rancid from.
> >
> > -Lance
> >
> > > -------- Original Message --------
> > > Subject: [rancid]  Fwd:  Dell Powerconnects
> > > From: PhaNtoX <phantox at gmail.com>
> > > Date: Thu, November 01, 2007 1:22 pm
> > > To: rancid-discuss at shrubbery.net
> > > Just tried this and it doesn't seem to be working im getting this in my
> > > logs.
> > > Trying to get all of the configs.
> > > 172.16.10.161 dlogin error: Error: Connection Refused (ssh)
> > > 172.16.10.161: missed cmd(s): show version,show system,show
> > > running-config,show vlan,dir
> > > 0: found end
> > > 172.16.10.161: End of run not found
> > > !
> > > =====================================
> > > Look at the activity on the switch itself its getting a telnet
> > connection
> > > for user unKnown
> > > my .cloginrc looks like this
> > > add autoenable 172.16.10.161 1
> > > add user 172.16.10.161 admin
> > > add password 172.16.10.161 password
> > > my router.db looks like this
> > > 172.16.10.161:smc:up
> > > And yes this is a cisco like
> > CLI<hr>_______________________________________________
> > > Rancid-discuss mailing list
> > > Rancid-discuss at shrubbery.net
> > > http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
> >
> ><hr>_______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss