[rancid] cannot get running-config

[Alex Malberty]

Hello,

I am having problems getting the running-config from a Cisco router with
IOS Version 12.3(8). I am using an enable 5 with low privileges, which I
know is what is causing the problem. Is there any way to get that
configuration without using a user with full privileges? 

Thanks

!NAME: "FastEthernet0",         DESCR: "Fast Ethernet"
!NAME: "FastEthernet1",         DESCR: "Fast Ethernet"
!NAME: "FastEthernet2",         DESCR: "Fast Ethernet"
!NAME: "FastEthernet3",         DESCR: "Fast Ethernet"
!NAME: "FastEthernet4",         DESCR: "PQUICC_FEC"
!
!VTP: VTP Version                     : 2
!VTP: Configuration Revision          : 0
!VTP: Maximum VLANs supported locally : 256
!VTP: Number of existing VLANs        : 5
!VTP: VTP Operating Mode              : Server
!VTP: VTP Domain Name                 :
!VTP: VTP Pruning Mode                : Disabled
!VTP: VTP V2 Mode                     : Disabled
!VTP: VTP Traps Generation            : Disabled
!VTP: MD5 digest                      : 88888888888888888
!VTP: Local updater ID is 12.12.12.12 on interface Vl1 (lowest numbered
VLAN interface found)
!
!VLAN: VLAN Name                             Status    Ports
!VLAN: ---- -------------------------------- ---------
-------------------------------
!VLAN: 1    default                          active    Fa0, Fa1, Fa2,
Fa3
!VLAN: 1002 fddi-default                     active
!VLAN: 1003 token-ring-default               active
!VLAN: 1004 fddinet-default                  active
!VLAN: 1005 trnet-default                    active
!VLAN: VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode
Trans1 Trans2
!VLAN: ---- ----- ---------- ----- ------ ------ -------- ---- --------
------ ------
!VLAN: 1    enet  100001     1500  -      -      -        -    -
1002   1003
!VLAN: 1002 fddi  101002     1500  -      -      -        -    -
1      1003
!VLAN: 1003 tr    101003     1500  1005   0      -        -    srb
1      1002
!VLAN: 1004 fdnet 101004     1500  -      -      1        ibm  -
0      0
!VLAN: 1005 trnet 101005     1500  -      -      1        ibm  -
0      0
!
!
config-register 0x2102
boot-start-marker
boot-end-marker
!
end

------------------------------------------------------------------------
--
Alejandro A. Malberty
Systems Administrator
Engineering
BabyCenter, LLC

amalberty at babycenter.com
p:  415.344.7626

 <http://www.babycenter.com> 


http://www.babycenter.com




This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's Email System Administrator.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20080415/68118c47/attachment.html