[rancid] Re: GSR 12k - sho diag / missing subslot spa info
Yuval Ben Ari
yuval.ben.ari at gmail.com
Mon Mar 3 17:57:18 UTC 2008
thanks!, I will try it
On Mon, Mar 3, 2008 at 7:16 AM, Elliott, Andrew <AElliott at xo.com> wrote:
> # This routine parses "show inventory".
> sub ShowInventory {
> print STDERR " In ShowInventory: $_" if ($debug);
>
> while (<INPUT>) {
> tr/\015//d;
> return if (/^\s*\^$/);
> last if (/^$prompt/);
> next if (/^(\s*|\s*$cmd\s*)$/);
> return(1) if /Line has invalid autocommand /;
> return(1) if /(Invalid input detected|Type help or )/;
> return(-1) if (/command authorization failed/i);
> # the pager can not be disabled per-session on the PIX
> if (/^(<-+ More -+>)/) {
> my($len) = length($1);
> s/^$1\s{$len}//;
> }
>
> if (/^(NAME: "[^"]*",) (DESCR: "[^"]+")/) {
> ProcessHistory("INVENTORY","","", sprintf("!%-30s %s\n", $1,
> $2));
> next;
> }
> # split PID/VID/SN line
> if (/^PID: (\S*)\s*, VID: (\S*)\s*, SN: (\S*)\s*$/) {
> my($entries) = "";
> $entries .= "!PID: $1\n" if ($1);
> $entries .= "!VID: $2\n" if ($2);
> $entries .= "!SN: $3\n" if ($3);
> ProcessHistory("INVENTORY","","", "$entries");
> next;
> }
> ProcessHistory("INVENTORY","","","!$_");
> }
> ProcessHistory("INVENTORY","","","!\n");
>
> return(0);
> }
>
> And add this to your command table:
>
> @commandtable = (
> {'show inventory raw' => 'ShowInventory'},
>
>
> ---
> Andrew Elliott
> XO Communications
> desk: 989.758.6987
> cell: 989.213.5794
>
>
>
>
>
>
> ________________________________
>
> From: Yuval Ben Ari [mailto:yuval.ben.ari at gmail.com]
> Sent: Sunday, March 02, 2008 9:13 AM
> To: Elliott, Andrew
> Cc: rancid-discuss at shrubbery.net
> Subject: Re: [rancid] Re: GSR 12k - sho diag / missing subslot
> spa info
>
>
> I am also having the same problem, and I am also interested to
> have the S/N of the SPA
> Indeed "show inventory" seems the best way to do it.
> has anyone added "show inventory" parser yet?
> otherwise I can try to add it and post here.
>
> Yuval
>
>
> On Wed, Jun 27, 2007 at 10:50 PM, Elliott, Andrew
> <AElliott at xo.com> wrote:
>
>
>
> > > Hello,
> > >
> > > I have been recently asked that my router backups
> include
> > the SUBSLOT
> > > line from 'sho diag' on the 12k's.
> > >
> > > Here is an example (trimmed for brevity) of the
> output I
> > want rancid to
> > > parse:
> > >
> > > SLOT 1 (RP/LC 1 ): Modular SPA Interface Card (10G)
> > > -snip-
> > >
> > > SPA Information:
> > > subslot 1/0: SPA-10X1GE-V2 (0x508), status
> is ok
> > > subslot 1/1: Empty
> > > subslot 1/2: Empty
> > > subslot 1/3: Empty
> > >
> > > SUBSLOT 1/0 (SPA-10X1GE-V2): 10-port Gigabit
> Ethernet Shared Port
> > > Adapter
> > > Product Identifier (PID) : SPA-10X1GE-V2
> > > -snip-
> > >
> > > This is a new card type that we have recently begun
> deploying, and
> > > currently all that is backed up is the main SPA IC
> > information, not the
> > > info on the "SUBSLOT" or "SPA -> subslot" lines.
> >
> > I'd need to have the complete output; I don't have
> GSRs anymore.
> >
>
> CHR1.NYC-NY#sho diag 1
>
>
> SLOT 1 (RP/LC 1 ): Modular SPA Interface Card (10G)
>
> MAIN: type 149, 00-0000-00 rev A0
> Deviation: D090170
> HW config: 0x20 SW key: 00-00-00
> PCA: 00-00000-00 rev A0 ver 4
> Design Release 1.0 S/N SAD000000M0
> MBUS: Embedded Agent
> Test hist: 0x00 RMA#: 00-00-00 RMA hist:
> 0x00
> DIAG: Test count: 0x00000000 Test results:
> 0x00000000
> FRU: Linecard/Module: 12000-SIP-601=
> Processor Memory: MEM-LC5-2048=(Non-Replaceable)
> Packet Memory: MEM-LC5-PKT-256=(Non-Replaceable)
> L3 Engine: 5 - ISE 10 Gbps
> MBUS Agent Software version 2.51 (RAM) (ROM version is
> 3.50)
> ROM Monitor version 17.1
> Fabric Downloader version used 4.1 (ROM version is 4.1)
> Primary clock is CSC 1
> Board is analyzed
> Board State is Line Card Enabled (IOS RUN )
> Insertion time: 00:22:52 (2w4d ago)
> Processor Memory size: 2147483648 bytes
> TX Packet Memory size: 268435456 bytes, Packet Memory
> pagesize: 32768
> bytes
> RX Packet Memory size: 268435456 bytes, Packet Memory
> pagesize: 32768
> bytes
> 0 crashes since restart
>
>
> SPA Information:
> subslot 1/0: SPA-10X1GE-V2 (0x508), status is ok
> subslot 1/1: Empty
> subslot 1/2: Empty
> subslot 1/3: Empty
>
> CHR1.NYC-NY#
>
>
> >
> > > It is possible I am using a version of rancid that
> needs to
> > be upgraded
> > > and/or patched.
> >
> > possibly. 'show inventory' has been added and that
> ought to
> > include this
> > information...if cisco has gotten around to adding it
> to this platform
> > yet.
> >
>
>
> Looks like this might be the best way to go. From the
> show inventory:
>
> NAME: "slot 1", DESCR: "ISE 10G Modular Services Card
> v2"
> PID: 12000-SIP-601 , VID: V02, SN: SAD111403M0
>
> NAME: "SPA subslot 1/0", DESCR: "10-port Gigabit
> Ethernet Shared Port
> Adapter"
> PID: SPA-10X1GE-V2 , VID: V01, SN: JAB111701NG
>
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
>
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20080303/681c4b56/attachment.html
More information about the Rancid-discuss
mailing list