[rancid] Re: cannot "exit" when using clogin

Max Clark max.clark at gmail.com
Tue Mar 25 03:21:03 UTC 2008


I forgot to add the autoenable to the router - adding that solved the
issue. Strange because it logged me in just fine, just had a problem
exiting.

Thanks,
Max

On Mon, Mar 24, 2008 at 7:00 PM, Lance Vermilion <rancid at gheek.net> wrote:
> Please show us your .cloginrc
>
>  -Lance
>
>
>
>  On Mon, Mar 24, 2008 at 5:53 PM, Max Clark <max.clark at gmail.com> wrote:
>  > Hello,
>  >
>  > I have a Cisco 2811 (show ver below) that I can execute "telnet" from
>  > the command line, connect, authenticate, and "exit" without problems.
>  > When I use clogin to connect to this device it authenticates fine, and
>  > I can execute commands on the router. However when I issue an "exit"
>  > the system does not disconnect. This is causing rancid to hang on this
>  > device. I have several Cisco routers/switches that are not a problem,
>  > only this unit.
>  >
>  > How do I resolve this?
>  >
>  > Thanks,
>  > Max
>  >
>  > rancid[~]% clogin 2811.foo.com
>  > 2811.foo.com
>  > spawn telnet 2811.foo.com
>  > Trying 10.10.10.46...
>  > Connected to 2811.foo.com.
>  > Escape character is '^]'.
>  >
>  > This system is for the use of authorized users only. Individuals using
>  > this system without authority, or in excess of their authority,
>  > are subject to having all of their activities on this system monitored
>  > and recorded by system personnel.
>  >
>  > In the course of monitoring individuals improperly using this system,
>  > or in the course of system maintenance, the activities of authorized
>  > users may also be monitored.
>  >
>  > Anyone using this system expressly consents to such monitoring and is
>  > advised that if such monitoring reveals possible evidence of criminal
>  > activity, system personnel may provide the evidence of such monitoring
>  > to law enforcement officials.
>  >
>  >
>  > User Access Verification
>  >
>  > Username: user
>  > Password:
>  >
>  > Router#exit
>  >
>  > Error: TIMEOUT reached
>  >
>  > Router#show ver
>  > Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version
>  > 12.4(7), RELEASE SOFTWARE (fc6)
>  > Technical Support: http://www.cisco.com/techsupport
>  > Copyright (c) 1986-2006 by Cisco Systems, Inc.
>  > Compiled Wed 01-Mar-06 07:23 by alnguyen
>  >
>  > ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
>  >
>  > Router uptime is 2 days, 44 minutes
>  > System returned to ROM by reload at 16:03:44 PCTime Sat Mar 22 2008
>  > System restarted at 00:06:18 UTC Sun Mar 23 2008
>  > System image file is "flash:c2800nm-advipservicesk9-mz.124-7"
>  >
>  >
>  > This product contains cryptographic features and is subject to United
>  > States and local country laws governing import, export, transfer and
>  > use. Delivery of Cisco cryptographic products does not imply
>  > third-party authority to import, export, distribute or use encryption.
>  > Importers, exporters, distributors and users are responsible for
>  > compliance with U.S. and local country laws. By using this product you
>  > agree to comply with applicable laws and regulations. If you are unable
>  > to comply with U.S. and local laws, return this product immediately.
>  >
>  > A summary of U.S. laws governing Cisco cryptographic products may be found at:
>  > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>  >
>  > If you require further assistance please contact us by sending email to
>  > export at cisco.com.
>  >
>  > Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
>  > Processor board ID FHK0909F0S8
>  > 6 FastEthernet interfaces
>  > 1 Serial interface
>  > 1 Virtual Private Network (VPN) Module
>  > DRAM configuration is 64 bits wide with parity enabled.
>  > 239K bytes of non-volatile configuration memory.
>  > 62592K bytes of ATA CompactFlash (Read/Write)
>  >
>  > Configuration register is 0x2102
>  > _______________________________________________
>  > Rancid-discuss mailing list
>  > Rancid-discuss at shrubbery.net
>  > http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>  >
>


More information about the Rancid-discuss mailing list