[rancid] Re: cannot "exit" when using clogin

[Lance Vermilion]

Please show us your .cloginrc

-Lance

On Mon, Mar 24, 2008 at 5:53 PM, Max Clark <max.clark at gmail.com> wrote:
> Hello,
>
> I have a Cisco 2811 (show ver below) that I can execute "telnet" from
> the command line, connect, authenticate, and "exit" without problems.
> When I use clogin to connect to this device it authenticates fine, and
> I can execute commands on the router. However when I issue an "exit"
> the system does not disconnect. This is causing rancid to hang on this
> device. I have several Cisco routers/switches that are not a problem,
> only this unit.
>
> How do I resolve this?
>
> Thanks,
> Max
>
> rancid[~]% clogin 2811.foo.com
> 2811.foo.com
> spawn telnet 2811.foo.com
> Trying 10.10.10.46...
> Connected to 2811.foo.com.
> Escape character is '^]'.
>
> This system is for the use of authorized users only. Individuals using
> this system without authority, or in excess of their authority,
> are subject to having all of their activities on this system monitored
> and recorded by system personnel.
>
> In the course of monitoring individuals improperly using this system,
> or in the course of system maintenance, the activities of authorized
> users may also be monitored.
>
> Anyone using this system expressly consents to such monitoring and is
> advised that if such monitoring reveals possible evidence of criminal
> activity, system personnel may provide the evidence of such monitoring
> to law enforcement officials.
>
>
> User Access Verification
>
> Username: user
> Password:
>
> Router#exit
>
> Error: TIMEOUT reached
>
> Router#show ver
> Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version
> 12.4(7), RELEASE SOFTWARE (fc6)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2006 by Cisco Systems, Inc.
> Compiled Wed 01-Mar-06 07:23 by alnguyen
>
> ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
>
> Router uptime is 2 days, 44 minutes
> System returned to ROM by reload at 16:03:44 PCTime Sat Mar 22 2008
> System restarted at 00:06:18 UTC Sun Mar 23 2008
> System image file is "flash:c2800nm-advipservicesk9-mz.124-7"
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be found at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export at cisco.com.
>
> Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
> Processor board ID FHK0909F0S8
> 6 FastEthernet interfaces
> 1 Serial interface
> 1 Virtual Private Network (VPN) Module
> DRAM configuration is 64 bits wide with parity enabled.
> 239K bytes of non-volatile configuration memory.
> 62592K bytes of ATA CompactFlash (Read/Write)
>
> Configuration register is 0x2102
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>