[rancid] Re: End of run not found... Running rancid 2.3.2 version
Sam Munzani
smunzani at comcast.net
Wed Jul 29 19:43:08 UTC 2009
I don't think rancid ever ran before on these devices. I am having
issues running it manually(rancid -d device-name or rancid-run -r
device-name). For some reason its not finding end of run so doesn't exit
clean. However I don't know why it doesn't find it because I do see
keywork "end" when type "show run" command upon clogin. I do clogin as
same user as the rancid-run executer.
Thanks,
Sam
> Sam,
>
> Has rancid ever ran successful against this router before? Make sure
> you are running rancid as the same user as it would run via cron. Make
> sure the environmentals are the same.
>
> -lance
>
> On Wed, Jul 29, 2009 at 12:00 PM, Sam Munzani <smunzani at comcast.net
> <mailto:smunzani at comcast.net>> wrote:
>
> Team,
>
>
> Can you please point me to right direction of troubleshooting?
> This is a
> very simple thing. A cisco router configured for rancid. no
> autoenable.
> clogin to the device works fine. However rancid script keeps giving me
> end of run not found error. When I run "show run" it clearly shows key
> word "end" at the end of config. Don't know why the script is not
> catching it.
>
> clogin -c "show run" lab-rtr1 works fine and the last line I see
> is end.
>
> Below is debug output.
> $: rancid -d lab-rtr1
> executing clogin -t 90 -c"admin show version;show version;show
> redundancy secondary;show idprom backplane;show install active;admin
> show env all;show env all;show rsp chassis-info;show gsr chassis;show
> diag chassis-info;show boot;show bootvar;admin show variables
> boot;show
> variables boot;show flash;dir /all nvram:;dir /all bootflash:;dir /all
> slot0:;dir /all disk0:;dir /all slot1:;dir /all disk1:;dir /all
> slot2:;dir /all disk2:;dir /all harddisk:;dir /all harddiska:;dir /all
> harddiskb:;dir /all sup-bootflash:;dir /all sup-microcode:;dir /all
> slavenvram:;dir /all slavebootflash:;dir /all slaveslot0:;dir /all
> slavedisk0:;dir /all slaveslot1:;dir /all slavedisk1:;dir /all
> slaveslot2:;dir /all slavedisk2:;dir /all slavesup-bootflash:;dir /all
> sec-nvram:;dir /all sec-bootflash:;dir /all sec-slot0:;dir /all
> sec-disk0:;dir /all sec-slot1:;dir /all sec-disk1:;dir /all
> sec-slot2:;dir /all sec-disk2:;show controllers;show controllers
> cbus;show diagbus;admin show diag;show diag;show module;show spe
> version;show c7200;show inventory raw;show vtp status;show vlan;show
> vlan-switch;show debug;more system:running-config;show
> running-config;write term" lab-rtr1
> PROMPT MATCH: lab-rtr1#
> HIT COMMAND:lab-rtr1#admin show version
> In ShowVersion: lab-rtr1#admin show version
> HIT COMMAND:lab-rtr1#show version
> In ShowVersion: lab-rtr1#show version
> TYPE = WS-C6509-E
> HIT COMMAND:lab-rtr1#show redundancy secondary
> In ShowRedundancy: lab-rtr1#show redundancy secondary
> HIT COMMAND:lab-rtr1#show idprom backplane
> In ShowIDprom: lab-rtr1#show idprom backplane
> HIT COMMAND:lab-rtr1#show install active
> In ShowInstallActive: lab-rtr1#show install active
> HIT COMMAND:lab-rtr1#admin show env all
> In ShowEnv: lab-rtr1#admin show env all
> HIT COMMAND:lab-rtr1#show env all
> In ShowEnv: lab-rtr1#show env all
> HIT COMMAND:lab-rtr1#show rsp chassis-info
> In ShowRSP: lab-rtr1#show rsp chassis-info
> HIT COMMAND:lab-rtr1#show gsr chassis
> In ShowGSR: lab-rtr1#show gsr chassis
> HIT COMMAND:lab-rtr1#show diag chassis-info
> In ShowGSR: lab-rtr1#show diag chassis-info
> HIT COMMAND:lab-rtr1#show boot
> In ShowBoot: lab-rtr1#show boot
> HIT COMMAND:lab-rtr1#show bootvar
> In ShowBoot: lab-rtr1#show bootvar
> HIT COMMAND:lab-rtr1#admin show variables boot
> In ShowBoot: lab-rtr1#admin show variables boot
> HIT COMMAND:lab-rtr1#show variables boot
> In ShowBoot: lab-rtr1#show variables boot
> HIT COMMAND:lab-rtr1#show flash
> In ShowFlash: lab-rtr1#show flash
> HIT COMMAND:lab-rtr1#dir /all nvram:
> In DirSlotN: lab-rtr1#dir /all nvram:
> HIT COMMAND:lab-rtr1#dir /all bootflash:
> In DirSlotN: lab-rtr1#dir /all bootflash:
> HIT COMMAND:lab-rtr1#dir /all slot0:
> In DirSlotN: lab-rtr1#dir /all slot0:
> HIT COMMAND:lab-rtr1#dir /all disk0:
> In DirSlotN: lab-rtr1#dir /all disk0:
> HIT COMMAND:lab-rtr1#dir /all slot1:
> In DirSlotN: lab-rtr1#dir /all slot1:
> HIT COMMAND:lab-rtr1#dir /all disk1:
> In DirSlotN: lab-rtr1#dir /all disk1:
> HIT COMMAND:lab-rtr1#dir /all slot2:
> In DirSlotN: lab-rtr1#dir /all slot2:
> HIT COMMAND:lab-rtr1#dir /all disk2:
> In DirSlotN: lab-rtr1#dir /all disk2:
> HIT COMMAND:lab-rtr1#dir /all harddisk:
> In DirSlotN: lab-rtr1#dir /all harddisk:
> HIT COMMAND:lab-rtr1#dir /all harddiska:
> In DirSlotN: lab-rtr1#dir /all harddiska:
> HIT COMMAND:lab-rtr1#dir /all harddiskb:
> In DirSlotN: lab-rtr1#dir /all harddiskb:
> HIT COMMAND:lab-rtr1#dir /all sup-bootflash:
> In DirSlotN: lab-rtr1#dir /all sup-bootflash:
> HIT COMMAND:lab-rtr1#dir /all sup-microcode:
> In DirSlotN: lab-rtr1#dir /all sup-microcode:
> HIT COMMAND:lab-rtr1#dir /all slavenvram:
> In DirSlotN: lab-rtr1#dir /all slavenvram:
> HIT COMMAND:lab-rtr1#dir /all slavebootflash:
> In DirSlotN: lab-rtr1#dir /all slavebootflash:
> HIT COMMAND:lab-rtr1#dir /all slaveslot0:
> In DirSlotN: lab-rtr1#dir /all slaveslot0:
> HIT COMMAND:lab-rtr1#dir /all slavedisk0:
> In DirSlotN: lab-rtr1#dir /all slavedisk0:
> HIT COMMAND:lab-rtr1#dir /all slaveslot1:
> In DirSlotN: lab-rtr1#dir /all slaveslot1:
> HIT COMMAND:lab-rtr1#dir /all slavedisk1:
> In DirSlotN: lab-rtr1#dir /all slavedisk1:
> HIT COMMAND:lab-rtr1#dir /all slaveslot2:
> In DirSlotN: lab-rtr1#dir /all slaveslot2:
> HIT COMMAND:lab-rtr1#dir /all slavedisk2:
> In DirSlotN: lab-rtr1#dir /all slavedisk2:
> HIT COMMAND:lab-rtr1#dir /all slavesup-bootflash:
> In DirSlotN: lab-rtr1#dir /all slavesup-bootflash:
> HIT COMMAND:lab-rtr1#dir /all sec-nvram:
> In DirSlotN: lab-rtr1#dir /all sec-nvram:
> HIT COMMAND:lab-rtr1#dir /all sec-bootflash:
> In DirSlotN: lab-rtr1#dir /all sec-bootflash:
> HIT COMMAND:lab-rtr1#dir /all sec-slot0:
> In DirSlotN: lab-rtr1#dir /all sec-slot0:
> HIT COMMAND:lab-rtr1#dir /all sec-disk0:
> In DirSlotN: lab-rtr1#dir /all sec-disk0:
> HIT COMMAND:lab-rtr1#dir /all sec-slot1:
> In DirSlotN: lab-rtr1#dir /all sec-slot1:
> HIT COMMAND:lab-rtr1#dir /all sec-disk1:
> In DirSlotN: lab-rtr1#dir /all sec-disk1:
> HIT COMMAND:lab-rtr1#dir /all sec-slot2:
> In DirSlotN: lab-rtr1#dir /all sec-slot2:
> HIT COMMAND:lab-rtr1#dir /all sec-disk2:
> In DirSlotN: lab-rtr1#dir /all sec-disk2:
> HIT COMMAND:lab-rtr1#show controllers
> In ShowContAll: lab-rtr1#show controllers
> HIT COMMAND:lab-rtr1#show controllers cbus
> In ShowContCbus: lab-rtr1#show controllers cbus
> HIT COMMAND:lab-rtr1#show diagbus
> In ShowDiagbus: lab-rtr1#show diagbus
> HIT COMMAND:lab-rtr1#admin show diag
> In ShowDiag: lab-rtr1#admin show diag
> HIT COMMAND:lab-rtr1#show diag
> In ShowDiag: lab-rtr1#show diag
> HIT COMMAND:lab-rtr1#show module
> In ShowModule: lab-rtr1#show module
> HIT COMMAND:lab-rtr1#show spe version
> In ShowSpeVersion: lab-rtr1#show spe version
> HIT COMMAND:lab-rtr1#show c7200
> In ShowC7200: lab-rtr1#show c7200
> HIT COMMAND:lab-rtr1#show inventory raw
> In ShowInventory: lab-rtr1#show inventory raw
> HIT COMMAND:lab-rtr1#show vtp status
> In ShowVTP: lab-rtr1#show vtp status
> HIT COMMAND:lab-rtr1#show vlan
> In ShowVLAN: lab-rtr1#show vlan
> HIT COMMAND:lab-rtr1#show vlan-switch
> In ShowVLAN: lab-rtr1#show vlan-switch
> HIT COMMAND:lab-rtr1#show debug
> In ShowDebug: lab-rtr1#show debug
> HIT COMMAND:lab-rtr1#more system:running-config
> In WriteTerm: lab-rtr1#more system:running-config
> lab-rtr1: missed cmd(s): write term,show running-config
> lab-rtr1: missed cmd(s): write term,show running-config
> lab-rtr1: End of run not found
> lab-rtr1: End of run not found
> !
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net <mailto:Rancid-discuss at shrubbery.net>
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20090729/06200b9f/attachment.html
More information about the Rancid-discuss
mailing list