[rancid] Re: End of run not found... Running rancid 2.3.2 version

Lance Vermilion rancid at gheek.net
Wed Jul 29 21:08:28 UTC 2009 

Sam,
The other possible option is that when exit is being run it doesn't return.
clean_run has to register as successful.

TOP: while(<INPUT>) {
    tr/\015//d;
    if (/[>#]\s?exit$/) {
        $clean_run=1;
        last;
    }
..
..
..
    if (!$clean_run || !$found_end) {
        print STDOUT "$host: End of run not found\n";
        print STDERR "$host: End of run not found\n" if ($debug);
        system("/usr/bin/tail -1 $host.new");
    }

On Wed, Jul 29, 2009 at 12:43 PM, Sam Munzani <smunzani at comcast.net> wrote:

>  I don't think rancid ever ran before on these devices. I am having issues
> running it manually(rancid -d device-name or rancid-run -r device-name). For
> some reason its not finding end of run so doesn't exit clean. However I
> don't know why it doesn't find it because I do see keywork "end" when type
> "show run" command upon clogin. I do clogin as same user as the rancid-run
> executer.
>
> Thanks,
> Sam
>
> Sam,
>  Has rancid ever ran successful against this router before? Make sure you
> are running rancid as the same user as it would run via cron. Make sure
> the environmentals are the same.
>
>  -lance
>
> On Wed, Jul 29, 2009 at 12:00 PM, Sam Munzani <smunzani at comcast.net>wrote:
>
>> Team,
>>
>>
>> Can you please point me to right direction of troubleshooting? This is a
>> very simple thing. A cisco router configured for rancid. no autoenable.
>> clogin to the device works fine. However rancid script keeps giving me
>> end of run not found error. When I run "show run" it clearly shows key
>> word "end" at the end of config. Don't know why the script is not
>> catching it.
>>
>> clogin -c "show run" lab-rtr1 works fine and the last line I see is end.
>>
>> Below is debug output.
>> $: rancid -d lab-rtr1
>> executing clogin -t 90 -c"admin show version;show version;show
>> redundancy secondary;show idprom backplane;show install active;admin
>> show env all;show env all;show rsp chassis-info;show gsr chassis;show
>> diag chassis-info;show boot;show bootvar;admin show variables boot;show
>> variables boot;show flash;dir /all nvram:;dir /all bootflash:;dir /all
>> slot0:;dir /all disk0:;dir /all slot1:;dir /all disk1:;dir /all
>> slot2:;dir /all disk2:;dir /all harddisk:;dir /all harddiska:;dir /all
>> harddiskb:;dir /all sup-bootflash:;dir /all sup-microcode:;dir /all
>> slavenvram:;dir /all slavebootflash:;dir /all slaveslot0:;dir /all
>> slavedisk0:;dir /all slaveslot1:;dir /all slavedisk1:;dir /all
>> slaveslot2:;dir /all slavedisk2:;dir /all slavesup-bootflash:;dir /all
>> sec-nvram:;dir /all sec-bootflash:;dir /all sec-slot0:;dir /all
>> sec-disk0:;dir /all sec-slot1:;dir /all sec-disk1:;dir /all
>> sec-slot2:;dir /all sec-disk2:;show controllers;show controllers
>> cbus;show diagbus;admin show diag;show diag;show module;show spe
>> version;show c7200;show inventory raw;show vtp status;show vlan;show
>> vlan-switch;show debug;more system:running-config;show
>> running-config;write term" lab-rtr1
>> PROMPT MATCH: lab-rtr1#
>> HIT COMMAND:lab-rtr1#admin show version
>>    In ShowVersion: lab-rtr1#admin show version
>> HIT COMMAND:lab-rtr1#show version
>>    In ShowVersion: lab-rtr1#show version
>> TYPE = WS-C6509-E
>> HIT COMMAND:lab-rtr1#show redundancy secondary
>>    In ShowRedundancy: lab-rtr1#show redundancy secondary
>> HIT COMMAND:lab-rtr1#show idprom backplane
>>    In ShowIDprom: lab-rtr1#show idprom backplane
>> HIT COMMAND:lab-rtr1#show install active
>>    In ShowInstallActive: lab-rtr1#show install active
>> HIT COMMAND:lab-rtr1#admin show env all
>>    In ShowEnv: lab-rtr1#admin show env all
>> HIT COMMAND:lab-rtr1#show env all
>>    In ShowEnv: lab-rtr1#show env all
>> HIT COMMAND:lab-rtr1#show rsp chassis-info
>>    In ShowRSP: lab-rtr1#show rsp chassis-info
>> HIT COMMAND:lab-rtr1#show gsr chassis
>>    In ShowGSR: lab-rtr1#show gsr chassis
>> HIT COMMAND:lab-rtr1#show diag chassis-info
>>    In ShowGSR: lab-rtr1#show diag chassis-info
>> HIT COMMAND:lab-rtr1#show boot
>>    In ShowBoot: lab-rtr1#show boot
>> HIT COMMAND:lab-rtr1#show bootvar
>>    In ShowBoot: lab-rtr1#show bootvar
>> HIT COMMAND:lab-rtr1#admin show variables boot
>>    In ShowBoot: lab-rtr1#admin show variables boot
>> HIT COMMAND:lab-rtr1#show variables boot
>>    In ShowBoot: lab-rtr1#show variables boot
>> HIT COMMAND:lab-rtr1#show flash
>>    In ShowFlash: lab-rtr1#show flash
>> HIT COMMAND:lab-rtr1#dir /all nvram:
>>    In DirSlotN: lab-rtr1#dir /all nvram:
>> HIT COMMAND:lab-rtr1#dir /all bootflash:
>>    In DirSlotN: lab-rtr1#dir /all bootflash:
>> HIT COMMAND:lab-rtr1#dir /all slot0:
>>    In DirSlotN: lab-rtr1#dir /all slot0:
>> HIT COMMAND:lab-rtr1#dir /all disk0:
>>    In DirSlotN: lab-rtr1#dir /all disk0:
>> HIT COMMAND:lab-rtr1#dir /all slot1:
>>    In DirSlotN: lab-rtr1#dir /all slot1:
>> HIT COMMAND:lab-rtr1#dir /all disk1:
>>    In DirSlotN: lab-rtr1#dir /all disk1:
>> HIT COMMAND:lab-rtr1#dir /all slot2:
>>    In DirSlotN: lab-rtr1#dir /all slot2:
>> HIT COMMAND:lab-rtr1#dir /all disk2:
>>    In DirSlotN: lab-rtr1#dir /all disk2:
>> HIT COMMAND:lab-rtr1#dir /all harddisk:
>>    In DirSlotN: lab-rtr1#dir /all harddisk:
>> HIT COMMAND:lab-rtr1#dir /all harddiska:
>>    In DirSlotN: lab-rtr1#dir /all harddiska:
>> HIT COMMAND:lab-rtr1#dir /all harddiskb:
>>    In DirSlotN: lab-rtr1#dir /all harddiskb:
>> HIT COMMAND:lab-rtr1#dir /all sup-bootflash:
>>    In DirSlotN: lab-rtr1#dir /all sup-bootflash:
>> HIT COMMAND:lab-rtr1#dir /all sup-microcode:
>>    In DirSlotN: lab-rtr1#dir /all sup-microcode:
>> HIT COMMAND:lab-rtr1#dir /all slavenvram:
>>    In DirSlotN: lab-rtr1#dir /all slavenvram:
>> HIT COMMAND:lab-rtr1#dir /all slavebootflash:
>>    In DirSlotN: lab-rtr1#dir /all slavebootflash:
>> HIT COMMAND:lab-rtr1#dir /all slaveslot0:
>>    In DirSlotN: lab-rtr1#dir /all slaveslot0:
>> HIT COMMAND:lab-rtr1#dir /all slavedisk0:
>>    In DirSlotN: lab-rtr1#dir /all slavedisk0:
>> HIT COMMAND:lab-rtr1#dir /all slaveslot1:
>>    In DirSlotN: lab-rtr1#dir /all slaveslot1:
>> HIT COMMAND:lab-rtr1#dir /all slavedisk1:
>>    In DirSlotN: lab-rtr1#dir /all slavedisk1:
>> HIT COMMAND:lab-rtr1#dir /all slaveslot2:
>>    In DirSlotN: lab-rtr1#dir /all slaveslot2:
>> HIT COMMAND:lab-rtr1#dir /all slavedisk2:
>>    In DirSlotN: lab-rtr1#dir /all slavedisk2:
>> HIT COMMAND:lab-rtr1#dir /all slavesup-bootflash:
>>    In DirSlotN: lab-rtr1#dir /all slavesup-bootflash:
>> HIT COMMAND:lab-rtr1#dir /all sec-nvram:
>>    In DirSlotN: lab-rtr1#dir /all sec-nvram:
>> HIT COMMAND:lab-rtr1#dir /all sec-bootflash:
>>    In DirSlotN: lab-rtr1#dir /all sec-bootflash:
>> HIT COMMAND:lab-rtr1#dir /all sec-slot0:
>>    In DirSlotN: lab-rtr1#dir /all sec-slot0:
>> HIT COMMAND:lab-rtr1#dir /all sec-disk0:
>>    In DirSlotN: lab-rtr1#dir /all sec-disk0:
>> HIT COMMAND:lab-rtr1#dir /all sec-slot1:
>>    In DirSlotN: lab-rtr1#dir /all sec-slot1:
>> HIT COMMAND:lab-rtr1#dir /all sec-disk1:
>>    In DirSlotN: lab-rtr1#dir /all sec-disk1:
>> HIT COMMAND:lab-rtr1#dir /all sec-slot2:
>>    In DirSlotN: lab-rtr1#dir /all sec-slot2:
>> HIT COMMAND:lab-rtr1#dir /all sec-disk2:
>>    In DirSlotN: lab-rtr1#dir /all sec-disk2:
>> HIT COMMAND:lab-rtr1#show controllers
>>    In ShowContAll: lab-rtr1#show controllers
>> HIT COMMAND:lab-rtr1#show controllers cbus
>>    In ShowContCbus: lab-rtr1#show controllers cbus
>> HIT COMMAND:lab-rtr1#show diagbus
>>    In ShowDiagbus: lab-rtr1#show diagbus
>> HIT COMMAND:lab-rtr1#admin show diag
>>    In ShowDiag: lab-rtr1#admin show diag
>> HIT COMMAND:lab-rtr1#show diag
>>    In ShowDiag: lab-rtr1#show diag
>> HIT COMMAND:lab-rtr1#show module
>>    In ShowModule: lab-rtr1#show module
>> HIT COMMAND:lab-rtr1#show spe version
>>    In ShowSpeVersion: lab-rtr1#show spe version
>> HIT COMMAND:lab-rtr1#show c7200
>>    In ShowC7200: lab-rtr1#show c7200
>> HIT COMMAND:lab-rtr1#show inventory raw
>>    In ShowInventory: lab-rtr1#show inventory raw
>> HIT COMMAND:lab-rtr1#show vtp status
>>    In ShowVTP: lab-rtr1#show vtp status
>> HIT COMMAND:lab-rtr1#show vlan
>>    In ShowVLAN: lab-rtr1#show vlan
>> HIT COMMAND:lab-rtr1#show vlan-switch
>>    In ShowVLAN: lab-rtr1#show vlan-switch
>> HIT COMMAND:lab-rtr1#show debug
>>    In ShowDebug: lab-rtr1#show debug
>> HIT COMMAND:lab-rtr1#more system:running-config
>>    In WriteTerm: lab-rtr1#more system:running-config
>> lab-rtr1: missed cmd(s): write term,show running-config
>> lab-rtr1: missed cmd(s): write term,show running-config
>> lab-rtr1: End of run not found
>> lab-rtr1: End of run not found
>> !
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss at shrubbery.net
>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20090729/96528f5f/attachment.html

More information about the Rancid-discuss mailing list