[rancid] rancid poll failing

[Steve Madel]

Password was the issue.  Fat fingered it in the .cloginrc.






On 6/24/11 10:50 AM, "Shellhammer, Erich S" <Erich.Shellhammer at unisys.com>
wrote:

>I would check the .cloginrc file and see if user/pass is correct, or no
>hidden spaces/characters... It looks like it's attempting to use the
>password.
>
>  
>Erich Shellhammer  |  Network Tools Engineer | Global Outsourcing and
>Infrastructure Services
>Unisys  |  9500 Metric Blvd Suite 100  | Austin, TX 78758  |  Office:
>512.719.9626 | Mobile:512.851.7116
>THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY
>MATERIAL and is thus for use only by the intended recipient. If you
>received this in error, please contact the sender and delete the e-mail
>and its attachments from all computers
>
>
>
>
>
>
>-----Original Message-----
>From: rancid-discuss-bounces at shrubbery.net
>[mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Steve Madel
>Sent: Friday, June 24, 2011 8:44 AM
>To: rancid-discuss at shrubbery.net
>Subject: Re: [rancid] rancid poll failing
>
>It appears to bomb out on the password.  Here is the output of running
>rancid with the  debug flag.
>
>spawn ssh -c 3des -x -l rancid c2960
>Password: 
>Password: 
>Password: 
>rancid at c2960's password:
>
>
>
>
>Thanks
>Steve Madel | Phone: 402.361.3047 | Solutionary | Relevant .
>Intelligent . Security
>
>
>
>
>
>
>On 6/24/11 8:25 AM, "Shellhammer, Erich S" <Erich.Shellhammer at unisys.com>
>wrote:
>
>>Does it fail to connect, or just not send commands... You can also
>>check your banner for special characters like #.
>>
>>My Banner has # boarders... I had to change clogin to ignore autoenable
>>features in the script.
>>
>>  
>>Erich Shellhammer  |  Network Tools Engineer | Global Outsourcing and
>>Infrastructure Services Unisys  |  9500 Metric Blvd Suite 100  |
>>Austin, TX 78758  |  Office:
>>512.719.9626 | Mobile:512.851.7116
>>THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE
>>PROPRIETARY MATERIAL and is thus for use only by the intended
>>recipient. If you received this in error, please contact the sender and
>>delete the e-mail and its attachments from all computers
>>
>>
>>
>>
>>
>>
>>-----Original Message-----
>>From: rancid-discuss-bounces at shrubbery.net
>>[mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Steve Madel
>>Sent: Thursday, June 23, 2011 4:10 PM
>>To: rancid-discuss at shrubbery.net
>>Subject: [rancid] rancid poll failing
>>
>>I have set up a new router for rancid to poll.  I can login to the
>>router via ssh with the rancid user and enable password but, when it
>>tries to poll or I use clogin from the command line it fails.  Any
>>suggestions?
>>
>>Thanks
>>Steve Madel | Phone: 402.361.3047 | Solutionary | Relevant .
>>Intelligent . Security _______________________________________________
>>Rancid-discuss mailing list
>>Rancid-discuss at shrubbery.net
>>http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
>_______________________________________________
>Rancid-discuss mailing list
>Rancid-discuss at shrubbery.net
>http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss