[rancid] rancid and Nexus 7010 - reference attached rancid -d output
Ian Stong
istong at costar.com
Mon May 16 15:47:19 UTC 2011
rancid at dcperfmon1:~/var/logs $ rancid -d 12.168.10.6
executing clogin -t 90 -c"show version;show redundancy secondary;show
idprom backplane;show install active;show env all;show rsp
chassis-info;sh ow gsr chassis;show boot;show bootvar;show
variables boot;show flash;dir /all nvram:;dir /all bootflash:;dir /all
slot0:;dir /all disk0:;dir /al l slot1:;dir /all disk1:;dir /all
slot2:;dir /all disk2:;dir /all harddisk:;dir /all harddiska:;dir /all
harddiskb:;dir /all sup-bootflash:;dir /all sup-microcode:;dir
/all slavenvram:;dir /all slavebootflash:;dir /all slaveslot0:;dir /all
slavedisk0:;dir /all slaveslot1:;dir /all slaved isk1:;dir /all
slaveslot2:;dir /all slavedisk2:;dir /all slavesup-bootflash:;dir /all
sec-nvram:;dir /all sec-bootflash:;dir /all sec-slot0:;dir /all
sec-disk0:;dir /all sec-slot1:;dir /all sec-disk1:;dir /all
sec-slot2:;dir /all sec-disk2:;show controllers;show controllers
cbus;show dia gbus;show diag;show module;show spe version;show
c7200;show vtp status;show vlan;show running-config;write term"
12.168.10.6
PROMPT MATCH: nexus7k-2#
HIT COMMAND:nexus7k-2# show version
In ShowVersion: nexus7k-2# show version
HIT COMMAND:nexus7k-2# show redundancy secondary
In ShowRedundancy: nexus7k-2# show redundancy secondary
HIT COMMAND:nexus7k-2# show idprom backplane
In ShowIDprom: nexus7k-2# show idprom backplane
HIT COMMAND:nexus7k-2# show install active
In ShowInstallActive: nexus7k-2# show install active
HIT COMMAND:nexus7k-2# show env all
In ShowEnv: nexus7k-2# show env all
HIT COMMAND:nexus7k-2# show rsp chassis-info
In ShowRSP: nexus7k-2# show rsp chassis-info
HIT COMMAND:nexus7k-2# show gsr chassis
In ShowGSR: nexus7k-2# show gsr chassis
HIT COMMAND:nexus7k-2# show boot
In ShowBoot: nexus7k-2# show boot
HIT COMMAND:nexus7k-2# show bootvar
In ShowBoot: nexus7k-2# show bootvar
HIT COMMAND:nexus7k-2# show variables boot
In ShowBoot: nexus7k-2# show variables boot
HIT COMMAND:nexus7k-2# show flash
In ShowFlash: nexus7k-2# show flash
HIT COMMAND:nexus7k-2# dir /all nvram:
In DirSlotN: nexus7k-2# dir /all nvram:
HIT COMMAND:nexus7k-2# dir /all bootflash:
In DirSlotN: nexus7k-2# dir /all bootflash:
HIT COMMAND:nexus7k-2# dir /all slot0:
In DirSlotN: nexus7k-2# dir /all slot0:
HIT COMMAND:nexus7k-2# dir /all disk0:
In DirSlotN: nexus7k-2# dir /all disk0:
HIT COMMAND:nexus7k-2# dir /all slot1:
In DirSlotN: nexus7k-2# dir /all slot1:
HIT COMMAND:nexus7k-2# dir /all disk1:
In DirSlotN: nexus7k-2# dir /all disk1:
HIT COMMAND:nexus7k-2# dir /all slot2:
In DirSlotN: nexus7k-2# dir /all slot2:
HIT COMMAND:nexus7k-2# dir /all disk2:
In DirSlotN: nexus7k-2# dir /all disk2:
HIT COMMAND:nexus7k-2# dir /all harddisk:
In DirSlotN: nexus7k-2# dir /all harddisk:
HIT COMMAND:nexus7k-2# dir /all harddiska:
In DirSlotN: nexus7k-2# dir /all harddiska:
HIT COMMAND:nexus7k-2# dir /all harddiskb:
In DirSlotN: nexus7k-2# dir /all harddiskb:
HIT COMMAND:nexus7k-2# dir /all sup-bootflash:
In DirSlotN: nexus7k-2# dir /all sup-bootflash:
HIT COMMAND:nexus7k-2# dir /all sup-microcode:
In DirSlotN: nexus7k-2# dir /all sup-microcode:
HIT COMMAND:nexus7k-2# dir /all slavenvram:
In DirSlotN: nexus7k-2# dir /all slavenvram:
HIT COMMAND:nexus7k-2# dir /all slavebootflash:
In DirSlotN: nexus7k-2# dir /all slavebootflash:
HIT COMMAND:nexus7k-2# dir /all slaveslot0:
In DirSlotN: nexus7k-2# dir /all slaveslot0:
HIT COMMAND:nexus7k-2# dir /all slavedisk0:
In DirSlotN: nexus7k-2# dir /all slavedisk0:
HIT COMMAND:nexus7k-2# dir /all slaveslot1:
In DirSlotN: nexus7k-2# dir /all slaveslot1:
HIT COMMAND:nexus7k-2# dir /all slavedisk1:
In DirSlotN: nexus7k-2# dir /all slavedisk1:
HIT COMMAND:nexus7k-2# dir /all slaveslot2:
In DirSlotN: nexus7k-2# dir /all slaveslot2:
HIT COMMAND:nexus7k-2# dir /all slavedisk2:
In DirSlotN: nexus7k-2# dir /all slavedisk2:
HIT COMMAND:nexus7k-2# dir /all slavesup-bootflash:
In DirSlotN: nexus7k-2# dir /all slavesup-bootflash:
HIT COMMAND:nexus7k-2# dir /all sec-nvram:
In DirSlotN: nexus7k-2# dir /all sec-nvram:
HIT COMMAND:nexus7k-2# dir /all sec-bootflash:
In DirSlotN: nexus7k-2# dir /all sec-bootflash:
HIT COMMAND:nexus7k-2# dir /all sec-slot0:
In DirSlotN: nexus7k-2# dir /all sec-slot0:
HIT COMMAND:nexus7k-2# dir /all sec-disk0:
In DirSlotN: nexus7k-2# dir /all sec-disk0:
HIT COMMAND:nexus7k-2# dir /all sec-slot1:
In DirSlotN: nexus7k-2# dir /all sec-slot1:
HIT COMMAND:nexus7k-2# dir /all sec-disk1:
In DirSlotN: nexus7k-2# dir /all sec-disk1:
HIT COMMAND:nexus7k-2# dir /all sec-slot2:
In DirSlotN: nexus7k-2# dir /all sec-slot2:
HIT COMMAND:nexus7k-2# dir /all sec-disk2:
In DirSlotN: nexus7k-2# dir /all sec-disk2:
HIT COMMAND:nexus7k-2# show controllers
In ShowContAll: nexus7k-2# show controllers
HIT COMMAND:nexus7k-2# show controllers cbus
In ShowContCbus: nexus7k-2# show controllers cbus
HIT COMMAND:nexus7k-2# show diagbus
In ShowDiagbus: nexus7k-2# show diagbus
HIT COMMAND:nexus7k-2# show diag
In ShowDiag: nexus7k-2# show diag
HIT COMMAND:nexus7k-2# show module
In ShowModule: nexus7k-2# show module
HIT COMMAND:nexus7k-2# show spe version
In ShowSpeVersion: nexus7k-2# show spe version
HIT COMMAND:nexus7k-2# show c7200
In ShowC7200: nexus7k-2# show c7200
HIT COMMAND:nexus7k-2# show vtp status
In ShowVTP: nexus7k-2# show vtp status
HIT COMMAND:nexus7k-2# show vlan
In ShowVLAN: nexus7k-2# show vlan
HIT COMMAND:nexus7k-2# show running-config
In WriteTerm: nexus7k-2# show running-config
HIT COMMAND:nexus7k-2# write term
In WriteTerm: nexus7k-2# write term
12.168.10.6: End of run not found
12.168.10.6: End of run not found
% Invalid command at '^' marker.
From: rancid-discuss-bounces at shrubbery.net
[mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Ian Stong
Sent: Tuesday, April 26, 2011 9:04 AM
To: rancid-discuss at shrubbery.net
Subject: [rancid] rancid and Nexus 7010
I've been using rancid for some time to monitor our nexus configs. We
recently upgraded the software on the nexus switches to v5. 1.3 and on
the 7010 switches I get several emails a day now reflecting diffs for
them - even though we aren't changing anything in the config. Wondering
if anyone has come across this or has suggestions on how to resolve it
based on the output below. These are the emails I receive shortly after
each other.
retrieving revision 1.244
diff -U 4 -r1.244 12.168.10.6
@@ -40,15 +40,17 @@
!LIC: License hostid: VDH=TBM11436241
!
!Red: % Permission denied
!
+ !Env: show environment fan
!Env: Clock:
!Env: ----------------------------------------------------------
!Env: Clock Model Hw Status
!Env: ----------------------------------------------------------
!Env: A Clock Module --
NotSupported/None
!Env: B Clock Module --
NotSupported/None
!
+ !Env: show environment temperature
!Env: Fan:
!Env: ------------------------------------------------------
!Env: Fan Model Hw Status
!Env: ------------------------------------------------------
@@ -130,8 +132,9 @@
!Env: xbar-2 Crossbar(s3) 105 95 Ok
!Env: xbar-3 Intake (s2) 60 42 Ok
!Env: xbar-3 Crossbar(s3) 105 95 Ok
!
+ !Env: show boot
!Env: Power Supply:
!Env: Voltage: 50 Volts
!Env: Power Total
!Env: Supply Model Capacity Status
@@ -169,8 +172,9 @@
!Env: Total Power Available for additional modules
1700 W
!
!Variable: % Permission denied
!
+ !Flash: bootflash: dir debug:
!Flash: bootflash: 4096 Apr 09 14:00:19 2011 bak/
!Flash: bootflash: 49152 Apr 09 14:01:49 2011 lost+found/
!Flash: bootflash: 100118021 Mar 18 08:41:00 2010
n7000-s1-dk9.4.2.4.bin
@@ -192,13 +196,17 @@
!Flash: debug: 0 MB used
!Flash: debug: 1 MB free
!Flash: debug: 2 MB total
!
+ !Flash: usb1: dir usb2:
+ !Flash: usb2: dir volatile:
+ !Flash: volatile: show module
!Flash: volatile: Usage for volatile://sup-local
!Flash: volatile: 0 MB used
!Flash: volatile: 500 MB free
!Flash: volatile: 500 MB total
!
+ !Mod: show module xbar
!Mod: Mod Ports Module-Type Model
Status
!Mod: --- ----- -------------------------------- ------------------
------------
!Mod: 1 48 10/100/1000 Mbps Ethernet Module N7K-M148GT-11
ok
!Mod: 2 32 10 Gbps Ethernet Module N7K-M132XP-12
ok
@@ -223,8 +231,9 @@
!Mod: 5 00-26-51-c7-74-98 to 00-26-51-c7-74-a0 JAF1348AHA1
!Mod: 6 00-26-51-c7-7d-60 to 00-26-51-c7-7d-68 JAF1348AHA2
!Mod:
!
+ !Mod: show inventory
!Mod: Xbar Ports Module-Type Model
Status
!Mod: --- ----- -------------------------------- ------------------
------------
!Mod: 1 0 Fabric Module 1 N7K-C7010-FAB-1
ok
!Mod: 2 0 Fabric Module 1 N7K-C7010-FAB-1
ok
@@ -243,8 +252,9 @@
!Mod: 2 NA JAF1346AARA
!Mod: 3 NA JAF1346AAPB
!Mod:
!
+ !show vlan
!NAME: "Chassis", DESCR: "Nexus7000 C7010 (10 Slot)
Chassis "
!PID: N7K-C7010
!VID: V01
!SN: TBM13436247
@@ -310,8 +320,9 @@
!DEBUG: `end`
!
!CORES: % Permission denied
!
+ !PROC_LOGS: show running-config
!PROC_LOGS: VDC Process PID Normal-exit Stack Core
Log-create-time
!PROC_LOGS: --- --------------- ------ ----------- ----- -----
---------------
------------------------------------------------------------------------
----------------
Email #2
retrieving revision 1.245
diff -U 4 -r1.245 12.168.10.6
@@ -16,8 +16,9 @@
!Software: kickstart compile time: 12/25/2020 12:00:00 [03/11/2011
07:42:56]
!Software: system image file is: bootflash:///n7000-s1-dk9.5.1.3.bin
!Software: system compile time: 1/21/2011 19:00:00 [03/11/2011
08:37:35]
!
+ !LIC: show license usage
!LIC: TBM13436247_134432796.lic:
!LIC: SERVER this_host ANY
!LIC: VENDOR cisco
!LIC: INCREMENT LAN_ENTERPRISE_SERVICES_PKG cisco 1.0 permanent
uncounted \ @@ -28,8 +29,9 @@
!LIC: VENDOR_STRING=MDS HOSTID=VDH=TBM13436241 \
!LIC:
NOTICE=<LicFileID>20091209081123000</LicFileID><LicLineID>2</LicLineID><
PAK>N7K-C7010-BUNTBM13436247</PAK> \
!LIC: SIGN=D21C78C8D0EA
!
+ !LIC: show license host-id
!LIC: Feature Ins Lic Status Expiry Date
Comments
!LIC: Count
!LIC: ENHANCED_LAYER2_PKG No - Unused -
!LIC: SCALABLE_SERVICES_PKG No - Unused -
@@ -38,8 +40,9 @@
!LIC: LAN_ENTERPRISE_SERVICES_PKG Yes - Unused Never -
!
!LIC: License hostid: VDH=TBM11436241
!
+ !Red: show environment clock
!Red: % Permission denied
!
!Env: show environment fan
!Env: Clock:
@@ -48,9 +51,8 @@
!Env: ----------------------------------------------------------
!Env: A Clock Module --
NotSupported/None
!Env: B Clock Module --
NotSupported/None
!
- !Env: show environment temperature
!Env: Fan:
!Env: ------------------------------------------------------
!Env: Fan Model Hw Status
!Env: ------------------------------------------------------
@@ -61,9 +63,11 @@
!Env: Fan_in_PS1 -- -- Ok
!Env: Fan_in_PS2 -- -- Ok
!Env: Fan_in_PS3 -- -- Absent
!Env: Fan Air Filter : Absent
+ !Env: show environment temperature
!
+ !Env: show power
!Env: Temperature:
!Env:
--------------------------------------------------------------------
!Env: Module Sensor MajorThresh MinorThres Status
!Env: (Celsius) (Celsius)
@@ -172,9 +176,8 @@
!Env: Total Power Available for additional modules
1700 W
!
!Variable: % Permission denied
!
- !Flash: bootflash: dir debug:
!Flash: bootflash: 4096 Apr 09 14:00:19 2011 bak/
!Flash: bootflash: 49152 Apr 09 14:01:49 2011 lost+found/
!Flash: bootflash: 100118021 Mar 18 08:41:00 2010
n7000-s1-dk9.4.2.4.bin
@@ -189,24 +192,22 @@
!Flash: bootflash: 431 MB used
!Flash: bootflash: 1294 MB free
!Flash: bootflash: 1726 MB total
!
+ !Flash: debug: dir slot0:
!Flash: debug: 8568 Apr 10 01:29:18 2011 bootvar_debug.log
!Flash: debug: 4 Apr 10 01:29:18 2011 bootvar_debug.meta
!Flash: debug: Usage for debug://sup-local
!Flash: debug: 0 MB used
!Flash: debug: 1 MB free
!Flash: debug: 2 MB total
!
- !Flash: usb1: dir usb2:
- !Flash: usb2: dir volatile:
- !Flash: volatile: show module
+ !Flash: slot0: dir usb1:
!Flash: volatile: Usage for volatile://sup-local
!Flash: volatile: 0 MB used
!Flash: volatile: 500 MB free
!Flash: volatile: 500 MB total
!
- !Mod: show module xbar
!Mod: Mod Ports Module-Type Model
Status
!Mod: --- ----- -------------------------------- ------------------
------------
!Mod: 1 48 10/100/1000 Mbps Ethernet Module N7K-M148GT-11
ok
!Mod: 2 32 10 Gbps Ethernet Module N7K-M132XP-12
ok
@@ -314,18 +315,19 @@
!PID: N7K-C7010-FAN-F
!VID: V02
!SN: FOX1339XA7Q
!
+ !DEBUG: show cores vdc-all
!DEBUG: Debug level is set to Minor(1)
!DEBUG: default for new sessions logging level: 0
!DEBUG: `end`
!
!CORES: % Permission denied
!
- !PROC_LOGS: show running-config
!PROC_LOGS: VDC Process PID Normal-exit Stack Core
Log-create-time
!PROC_LOGS: --- --------------- ------ ----------- ----- -----
---------------
!
+ exit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20110516/86e6bf3a/attachment.html>
More information about the Rancid-discuss
mailing list