[rancid] Rancid and Nexus 5K

DAVID Sébastien sdavid at ecritel.net
Tue May 17 08:20:51 UTC 2011 

Hi,

Since one week, my rancid backup doesn't work anymore on our N5K cisco.

I have launched a debug mode and every works fine such as clogin command

rancid at DebCacti:~/bin$ /var/lib/rancid/bin/rancid -d n5k1-b5-std2
executing clogin -t 90 -c"show version;show redundancy secondary;show idprom backplane;show install active;show env all;show rsp chassis-info;show gsr chassis;show diag chassis-info;show boot;show bootvar;show variables boot;show flash;dir /all nvram:;dir /all bootflash:;dir /all slot0:;dir /all disk0:;dir /all slot1:;dir /all disk1:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all harddiska:;dir /all harddiskb:;dir /all sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir /all slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all slavedisk2:;dir /all slavesup-bootflash:;dir /all sec-nvram:;dir /all sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all sec-disk2:;show controllers;show controllers cbus;show diagbus;show diag;show module;show spe version;show c7200;show inventory raw;show vtp status;show vlan;show vlan-switch;show debug;more system:running-config;show running-config;write term" n5k1-b5-std2
PROMPT MATCH: N5K1-B5-STD2#
HIT COMMAND:N5K1-B5-STD2#  show version
    In ShowVersion: N5K1-B5-STD2#  show version
HIT COMMAND:N5K1-B5-STD2# show idprom backplane
    In ShowIDprom: N5K1-B5-STD2# show idprom backplane
HIT COMMAND:N5K1-B5-STD2# show install active
    In ShowInstallActive: N5K1-B5-STD2# show install active
HIT COMMAND:N5K1-B5-STD2# show env all
    In ShowEnv: N5K1-B5-STD2# show env all
HIT COMMAND:N5K1-B5-STD2# show rsp chassis-info
    In ShowRSP: N5K1-B5-STD2# show rsp chassis-info
HIT COMMAND:N5K1-B5-STD2# show gsr chassis
    In ShowGSR: N5K1-B5-STD2# show gsr chassis
HIT COMMAND:N5K1-B5-STD2# show diag chassis-info
    In ShowGSR: N5K1-B5-STD2# show diag chassis-info
HIT COMMAND:N5K1-B5-STD2# show boot
    In ShowBoot: N5K1-B5-STD2# show boot
HIT COMMAND:N5K1-B5-STD2# show bootvar
    In ShowBoot: N5K1-B5-STD2# show bootvar
HIT COMMAND:N5K1-B5-STD2# show variables boot
    In ShowBoot: N5K1-B5-STD2# show variables boot
HIT COMMAND:N5K1-B5-STD2# show flash
    In ShowFlash: N5K1-B5-STD2# show flash
HIT COMMAND:N5K1-B5-STD2# dir /all nvram:
    In DirSlotN: N5K1-B5-STD2# dir /all nvram:
HIT COMMAND:N5K1-B5-STD2# dir /all bootflash:
    In DirSlotN: N5K1-B5-STD2# dir /all bootflash:
HIT COMMAND:N5K1-B5-STD2# dir /all slot0:
    In DirSlotN: N5K1-B5-STD2# dir /all slot0:
HIT COMMAND:N5K1-B5-STD2# dir /all disk0:
    In DirSlotN: N5K1-B5-STD2# dir /all disk0:
HIT COMMAND:N5K1-B5-STD2# dir /all slot1:
    In DirSlotN: N5K1-B5-STD2# dir /all slot1:
HIT COMMAND:N5K1-B5-STD2# dir /all disk1:
    In DirSlotN: N5K1-B5-STD2# dir /all disk1:
HIT COMMAND:N5K1-B5-STD2# dir /all slot2:
    In DirSlotN: N5K1-B5-STD2# dir /all slot2:
HIT COMMAND:N5K1-B5-STD2# dir /all disk2:
    In DirSlotN: N5K1-B5-STD2# dir /all disk2:
HIT COMMAND:N5K1-B5-STD2# dir /all harddisk:
    In DirSlotN: N5K1-B5-STD2# dir /all harddisk:
HIT COMMAND:N5K1-B5-STD2# dir /all harddiska:
    In DirSlotN: N5K1-B5-STD2# dir /all harddiska:
HIT COMMAND:N5K1-B5-STD2# dir /all harddiskb:
    In DirSlotN: N5K1-B5-STD2# dir /all harddiskb:
HIT COMMAND:N5K1-B5-STD2# dir /all sup-bootflash:
    In DirSlotN: N5K1-B5-STD2# dir /all sup-bootflash:
HIT COMMAND:N5K1-B5-STD2# dir /all sup-microcode:
    In DirSlotN: N5K1-B5-STD2# dir /all sup-microcode:
HIT COMMAND:N5K1-B5-STD2# dir /all slavenvram:
    In DirSlotN: N5K1-B5-STD2# dir /all slavenvram:
HIT COMMAND:N5K1-B5-STD2# dir /all slavebootflash:
    In DirSlotN: N5K1-B5-STD2# dir /all slavebootflash:
HIT COMMAND:N5K1-B5-STD2# dir /all slaveslot0:
    In DirSlotN: N5K1-B5-STD2# dir /all slaveslot0:
HIT COMMAND:N5K1-B5-STD2# dir /all slavedisk0:
    In DirSlotN: N5K1-B5-STD2# dir /all slavedisk0:
HIT COMMAND:N5K1-B5-STD2# dir /all slaveslot1:
    In DirSlotN: N5K1-B5-STD2# dir /all slaveslot1:
HIT COMMAND:N5K1-B5-STD2# dir /all slavedisk1:
    In DirSlotN: N5K1-B5-STD2# dir /all slavedisk1:
HIT COMMAND:N5K1-B5-STD2# dir /all slaveslot2:
    In DirSlotN: N5K1-B5-STD2# dir /all slaveslot2:
HIT COMMAND:N5K1-B5-STD2# dir /all slavedisk2:
    In DirSlotN: N5K1-B5-STD2# dir /all slavedisk2:
HIT COMMAND:N5K1-B5-STD2# dir /all slavesup-bootflash:
    In DirSlotN: N5K1-B5-STD2# dir /all slavesup-bootflash:
HIT COMMAND:N5K1-B5-STD2# dir /all sec-nvram:
    In DirSlotN: N5K1-B5-STD2# dir /all sec-nvram:
HIT COMMAND:N5K1-B5-STD2# dir /all sec-bootflash:
    In DirSlotN: N5K1-B5-STD2# dir /all sec-bootflash:
HIT COMMAND:N5K1-B5-STD2# dir /all sec-slot0:
    In DirSlotN: N5K1-B5-STD2# dir /all sec-slot0:
HIT COMMAND:N5K1-B5-STD2# dir /all sec-disk0:
    In DirSlotN: N5K1-B5-STD2# dir /all sec-disk0:
HIT COMMAND:N5K1-B5-STD2# dir /all sec-slot1:
    In DirSlotN: N5K1-B5-STD2# dir /all sec-slot1:
HIT COMMAND:N5K1-B5-STD2# dir /all sec-disk1:
    In DirSlotN: N5K1-B5-STD2# dir /all sec-disk1:
HIT COMMAND:N5K1-B5-STD2# dir /all sec-slot2:
    In DirSlotN: N5K1-B5-STD2# dir /all sec-slot2:
HIT COMMAND:N5K1-B5-STD2# dir /all sec-disk2:
    In DirSlotN: N5K1-B5-STD2# dir /all sec-disk2:
HIT COMMAND:N5K1-B5-STD2# show controllers
    In ShowContAll: N5K1-B5-STD2# show controllers
HIT COMMAND:N5K1-B5-STD2# show controllers cbus
    In ShowContCbus: N5K1-B5-STD2# show controllers cbus
HIT COMMAND:N5K1-B5-STD2# show diagbus
    In ShowDiagbus: N5K1-B5-STD2# show diagbus
HIT COMMAND:N5K1-B5-STD2# show diag
    In ShowDiag: N5K1-B5-STD2# show diag
HIT COMMAND:N5K1-B5-STD2# show module
    In ShowModule: N5K1-B5-STD2# show module
HIT COMMAND:N5K1-B5-STD2# show spe version
    In ShowSpeVersion: N5K1-B5-STD2# show spe version
HIT COMMAND:N5K1-B5-STD2# show c7200
    In ShowC7200: N5K1-B5-STD2# show c7200
HIT COMMAND:N5K1-B5-STD2# show inventory raw
    In ShowInventory: N5K1-B5-STD2# show inventory raw
HIT COMMAND:N5K1-B5-STD2# show vtp status
    In ShowVTP: N5K1-B5-STD2# show vtp status
HIT COMMAND:N5K1-B5-STD2# show vlan
    In ShowVLAN: N5K1-B5-STD2# show vlan
HIT COMMAND:N5K1-B5-STD2# show vlan-switch
    In ShowVLAN: N5K1-B5-STD2# show vlan-switch
HIT COMMAND:N5K1-B5-STD2# show debug
    In ShowDebug: N5K1-B5-STD2# show debug
HIT COMMAND:N5K1-B5-STD2# more system:running-config
    In WriteTerm: N5K1-B5-STD2# more system:running-config
HIT COMMAND:N5K1-B5-STD2# show running-config
    In WriteTerm: N5K1-B5-STD2# show running-config
HIT COMMAND:N5K1-B5-STD2# write term
    In WriteTerm: N5K1-B5-STD2# write term
n5k1-b5-std2: missed cmd(s): show redundancy secondary
n5k1-b5-std2: missed cmd(s): show redundancy secondary
But when my cron try to backup it , I have the following error :
n5k1-b5-std2: missed cmd(s): show redundancy secondary
=====================================
Getting missed routers: round 2.
n5k1-b5-std2 clogin error: Error: Check your passwd for n5k1-b5-std2
Thanks for your help
Regards,
Sébastien

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20110517/c487b2df/attachment.html>

More information about the Rancid-discuss mailing list