[rancid] Issue with HP Procurve 2910-48G al

[Daniel Schmidt]

Off the top of my head - Perhaps you have your autoenable set wrong in cloginrc?

2012/4/17 TAN Lists <lists at theatticnetwork.net>:
> Hey All,
>
> I'm fairly new to Rancid and inherited a setup with mainly HP switches. All
> of them work fine but 2 new switches i just added which are HP Procurve
> 2910-48G al (J9147A) running version W.14.49
>
> When i add them to RANCID i get timeout errors in the logs, but clogin works
> fine to log me in.
>
> A similar issue is described here
> http://www.gossamer-threads.com/lists/rancid/users/5203 (but its not exactly
> the same)
>
> In debug mode, i get a login prompt, then nothing
>
> Switches use TACACS on the same server as RANCID - all switches use SSH
>
> Troubleshooting:
> /usr/local/rancid/bin/clogin clswitch1
> This works - logs me straight in as the RANCID user and i have full
> privileges and can run commands
>
> ----------------------------------------------------
>
> /usr/local/rancid/bin/clogin -c "sh run" clswitch1
> clswitch1# terminal length 0
> Invalid input: 0
> clswitch1# logout
> Error: TIMEOUT reached
>
> Then drops me back to a shell (I think this is where the whole issue lies)
>
> ----------------------------------------------------
>
> When i add the switch to the main config of RANCID
> clswitch1:hp:up
>
> When i run /usr/local/rancid/bin/rancid-run i get
>
> <OMITTED>
> Trying to get all of the configs.
> clswitch1 clogin error: Error: TIMEOUT reached
> clswitch1: missed cmd(s): show tech transceivers,show module,show config
> status,show system-inform
> Trying to get all of the configs.
> clswitch1 clogin error: Error: TIMEOUT reached
> ation,show system information,show stack,show version,show flash,write
> term,show config files
> clswitch1: End of run not found
> ;
> =====================================
> <OMITTED>
> Rinse repeat for all 4 rounds
>
> I looked into using hlogin and when specifying the password, it still hung
> at the enter password prompt
>
> I really could use some help on this, I've been researching all done and
> can't get anywhere
>
> I'm also finding that if i play with this too much, eventually the switch
> locks me out (SSH connection returns identification failure). If i reload it
> - its fine - if i dont initiate connections from RANCID its fine for over 72
> hours, but the second i start doing logins through RANCID, the lockouts
> start - which is really weird
>
> I read some things about stacking being an issue, so i have changed the
> config to "no stack" (we dont need it anyway)
>
> Thoughts much appreciated guys, i look forward to your thoughts to get to
> the bottom of this one
>
> Thanks
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
E-Mail to and from me, in connection with the transaction 
of public business, is subject to the Wyoming Public Records 
Act and may be disclosed to third parties.