[rancid] Trying to get a vendortable working but it just won't work for alurancid

[Barry Murphy]

Hey guys, spent the last few hours trying to get this to work but it continues to try clogin rather than alulogin / alurancid like it should:

I have edited rancid-fe and added:
    'alcatel'           => 'alurancid',

rancid at watcher:~/bin$ more ../data/vibecore-alcatel/router.db
mdr-tr1:alcatel:up

As you can see its using clogin commands rather than the alcatel commands which are in alurancid / alulogin.

I obtained the ALU scripts from https://code.google.com/p/alurancid/

rancid at watcher:~/bin$ env NOPIPE=y PATH=${PATH}:/home/rancid/bin rancid -d mdr-tr1
executing clogin -t 90 -c"admin show version;show version;show redundancy secondary;show idprom backplane;show install active;admin show env all;show env all;show rsp chassis-info;show gsr chassis;show diag chassis-info;show boot;admin show variables boot;show variables boot;dir /all nvram:;dir /all slot0:;dir /all disk0:;dir /all slot1:;dir /all disk1:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all harddiska:;dir /all harddiskb:;dir /all sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir /all slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all slavedisk2:;dir /all slavesup-bootflash:;dir /all sec-nvram:;dir /all sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all sec-disk2:;show controllers;show controllers cbus;show diagbus;admin show diag;show diag;show module;show spe version;show c7200;show inventory raw;show vtp status;show vlan;show vlan-switch;show debug;more system:running-config;show running-config;write term" mdr-tr1
mdr-tr1 clogin error: Error: Bad command.
mdr-tr1 clogin error: Error: Bad command.
mdr-tr1: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,show install active,dir /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show variables boot,show boot,show inventory raw,dir /all slavedisk1:,show env all,show module,admin show env all,show controllers,admin show version,show diagbus,more system:running-config,dir /all slavedisk0:,show debug,show idprom backplane,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,dir /all nvram:,show version,show vlan-switch,admin show variables boot,show redundancy secondary,show running-config,show c7200,dir /all slot1:
mdr-tr1: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,show install active,dir /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show variables boot,show boot,show inventory raw,dir /all slavedisk1:,show env all,show module,admin show env all,show controllers,admin show version,show diagbus,more system:running-config,dir /all slavedisk0:,show debug,show idprom backplane,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,dir /all nvram:,show version,show vlan-switch,admin show variables boot,show redundancy secondary,show running-config,show c7200,dir /all slot1:
mdr-tr1: End of run not found
mdr-tr1: End of run not found

Any help would be much appreciated.

Regards

--
Barry Murphy | barry at vibecommunications.co.nz<mailto:barry at vibecommunications.co.nz> | Chief Operating Officer | Vibe Communications Limited | Mobile: 0274 909 712
Unit A7, 1 Beresford Square, Auckland Central 1010 | PO Box 68707, Newton, Auckland 1145 | Phone: 09 222 0000 Ext 6 | 0800 842326 | Fax: 0800 842327
WEB: http://www.vibecommunications.co.nz
Peering: http://as45177.peeringdb.com/

[Description: Description: Description: cid:image001.png at 01CB9D57.2FAB9280]
"Solution specialists achieving great results within economic realities"

This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20140226/fd98ba5d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: AFF6A554-E76E-45C9-B432-32799E9B13F6[122].png
Type: image/png
Size: 5072 bytes
Desc: AFF6A554-E76E-45C9-B432-32799E9B13F6[122].png
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20140226/fd98ba5d/attachment.png>