[rancid] Trying to get a vendortable working but it just won't work for alurancid

[Alan McKinnon]

You are telling it to run the rancid script which runs clogin.

"rancid" is not the controller script that calls rancid-fe and decides
what to use, it really is the IOS parser. An unfortunate legacy name
choice, but it is the way things are.

Do this:

rancid-run -r <hostname>

To debug the alcatel parser itself, you must do
"alurancid -d <hostname>"




On 26/02/2014 10:48, Barry Murphy wrote:
> Hey guys, spent the last few hours trying to get this to work but it
> continues to try clogin rather than alulogin / alurancid like it should:
> 
> I have edited rancid-fe and added:
>     'alcatel'           => 'alurancid',
> 
> rancid at watcher:~/bin$ more ../data/vibecore-alcatel/router.db 
> mdr-tr1:alcatel:up
> 
> As you can see its using clogin commands rather than the alcatel
> commands which are in alurancid / alulogin.
> 
> I obtained the ALU scripts from https://code.google.com/p/alurancid/
> 
> rancid at watcher:~/bin$ env NOPIPE=y PATH=${PATH}:/home/rancid/bin rancid
> -d mdr-tr1
> executing clogin -t 90 -c"admin show version;show version;show
> redundancy secondary;show idprom backplane;show install active;admin
> show env all;show env all;show rsp chassis-info;show gsr chassis;show
> diag chassis-info;show boot;admin show variables boot;show variables
> boot;dir /all nvram:;dir /all slot0:;dir /all disk0:;dir /all slot1:;dir
> /all disk1:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all
> harddiska:;dir /all harddiskb:;dir /all sup-bootflash:;dir /all
> sup-microcode:;dir /all slavenvram:;dir /all slavebootflash:;dir /all
> slaveslot0:;dir /all slavedisk0:;dir /all slaveslot1:;dir /all
> slavedisk1:;dir /all slaveslot2:;dir /all slavedisk2:;dir /all
> slavesup-bootflash:;dir /all sec-nvram:;dir /all sec-bootflash:;dir /all
> sec-slot0:;dir /all sec-disk0:;dir /all sec-slot1:;dir /all
> sec-disk1:;dir /all sec-slot2:;dir /all sec-disk2:;show controllers;show
> controllers cbus;show diagbus;admin show diag;show diag;show module;show
> spe version;show c7200;show inventory raw;show vtp status;show vlan;show
> vlan-switch;show debug;more system:running-config;show
> running-config;write term" mdr-tr1
> mdr-tr1 clogin error: Error: Bad command. 
> mdr-tr1 clogin error: Error: Bad command. 
> mdr-tr1: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp
> chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr
> chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,dir
> /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all
> disk0:,show install active,dir /all slaveslot0:,dir /all sec-slot1:,dir
> /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all
> slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show
> variables boot,show boot,show inventory raw,dir /all slavedisk1:,show
> env all,show module,admin show env all,show controllers,admin show
> version,show diagbus,more system:running-config,dir /all
> slavedisk0:,show debug,show idprom backplane,dir /all sec-slot0:,dir
> /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir
> /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all
> sup-microcode:,show vlan,dir /all slavebootflash:,show controllers
> cbus,dir /all slaveslot1:,dir /all nvram:,show version,show
> vlan-switch,admin show variables boot,show redundancy secondary,show
> running-config,show c7200,dir /all slot1:
> mdr-tr1: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp
> chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr
> chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,dir
> /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all
> disk0:,show install active,dir /all slaveslot0:,dir /all sec-slot1:,dir
> /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all
> slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show
> variables boot,show boot,show inventory raw,dir /all slavedisk1:,show
> env all,show module,admin show env all,show controllers,admin show
> version,show diagbus,more system:running-config,dir /all
> slavedisk0:,show debug,show idprom backplane,dir /all sec-slot0:,dir
> /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir
> /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all
> sup-microcode:,show vlan,dir /all slavebootflash:,show controllers
> cbus,dir /all slaveslot1:,dir /all nvram:,show version,show
> vlan-switch,admin show variables boot,show redundancy secondary,show
> running-config,show c7200,dir /all slot1:
> mdr-tr1: End of run not found
> mdr-tr1: End of run not found
> 
> Any help would be much appreciated.
> 
> Regards
> 
> -- 
> 
> *Barry Murphy* | barry at vibecommunications.co.nz
> <mailto:barry at vibecommunications.co.nz> | Chief Operating Officer
> | *Vibe Communications Limited *| Mobile: 0274 909 712
> 
> Unit A7, 1 Beresford Square, Auckland Central 1010 | PO Box 68707,
> Newton, Auckland 1145 | Phone: 09 222 0000 Ext 6 | 0800 842326 | Fax:
> 0800 842327
> 
> WEB: http://www.vibecommunications.co.nz
> 
> Peering: http://as45177.peeringdb.com/
> 
> 
> Description: Description: Description: cid:image001.png at 01CB9D57.2FAB9280
> 
> /“Solution specialists achieving great results within economic realities”/
> 
> /
> /
> 
> /This communication, including any attachments, is confidential. If you
> are not the intended recipient, you should not read it - please contact
> me immediately, destroy it, and do not copy or use any part of this
> communication or disclose anything about it. Thank you. Please note that
> this communication does not designate an information system for the
> purposes of the Electronic Transactions Act 2002./ 
> 
> 
> 
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
> 


-- 
Alan McKinnon
alan.mckinnon at gmail.com