[rancid] Trying to get a vendortable working but it just won't work for alurancid

Wed Feb 26 20:07:18 UTC 2014

Hi,

Thanks for that, it was getting late in the day and I was starting to test
with the wrong command :)

I executed:
rancid at watcher:~/bin$ env NOPIPE=y PATH=${PATH}:/home/rancid/bin alurancid
-d mdr-tr1
And received 2 files

rancid at watcher:~/bin$ ls -al mdr-tr1.*
-rw-r--r-- 1 rancid rancid 29658 2014-02-27 09:02 mdr-tr1.new
-rw-r--r-- 1 rancid rancid 31293 2014-02-27 09:02 mdr-tr1.raw

The files look correct however my rancid is still not generating files:

rancid at watcher:~$ ls data/vibecore-alcatel/configs/
CVS

I have configured my router.db as follows:

rancid at watcher:~$ cat data/vibecore-alcatel/router.db
mdr-tr1:alcatel:up
mdr-tr2:alcatel:up
sy3-tr1:alcatel:up
sy3-tr2:alcatel:up
sv1-tr1:alcatel:up
sv1-tr2:alcatel:up

I have also configured .cloginrc correctly else the debug mode wouldn't
know the login details for the routers.

I have tried running:
rancid at watcher:~/bin$ env NOPIPE=y PATH=${PATH}:/home/rancid/bin
rancid-run -r mdr-tr1
rancid at watcher:~/bin$

However I don't see anything happen, when I pressed enter on the above
command it immediately went to the next line.

Any assistance would be great.

Thanks

-- 
Barry Murphy | barry at vibecommunications.co.nz | Chief Operating Officer |
Vibe Communications Limited | Mobile: 0274 909 712
Unit A7, 1 Beresford Square, Auckland Central 1010 | PO Box 68707, Newton,
Auckland 1145 | Phone: 09 222 0000 Ext 6 | 0800 842326 | Fax: 0800 842327
WEB: http://www.vibecommunications.co.nz
Peering: http://as45177.peeringdb.com/

³Solution specialists achieving great results within economic realities²

This communication, including any attachments, is confidential. If you are
not the intended recipient, you should not read it - please contact me
immediately, destroy it, and do not copy or use any part of this
communication or disclose anything about it. Thank you. Please note that
this communication does not designate an information system for the
purposes of the Electronic Transactions Act 2002.

On 27/02/14 3:57 AM, "Alan McKinnon" <alan.mckinnon at gmail.com> wrote:

>You are telling it to run the rancid script which runs clogin.
>
>"rancid" is not the controller script that calls rancid-fe and decides
>what to use, it really is the IOS parser. An unfortunate legacy name
>choice, but it is the way things are.
>
>Do this:
>
>rancid-run -r <hostname>
>
>To debug the alcatel parser itself, you must do
>"alurancid -d <hostname>"
>
>
>
>
>On 26/02/2014 10:48, Barry Murphy wrote:
>> Hey guys, spent the last few hours trying to get this to work but it
>> continues to try clogin rather than alulogin / alurancid like it should:
>> 
>> I have edited rancid-fe and added:
>>     'alcatel'           => 'alurancid',
>> 
>> rancid at watcher:~/bin$ more ../data/vibecore-alcatel/router.db
>> mdr-tr1:alcatel:up
>> 
>> As you can see its using clogin commands rather than the alcatel
>> commands which are in alurancid / alulogin.
>> 
>> I obtained the ALU scripts from https://code.google.com/p/alurancid/
>> 
>> rancid at watcher:~/bin$ env NOPIPE=y PATH=${PATH}:/home/rancid/bin rancid
>> -d mdr-tr1
>> executing clogin -t 90 -c"admin show version;show version;show
>> redundancy secondary;show idprom backplane;show install active;admin
>> show env all;show env all;show rsp chassis-info;show gsr chassis;show
>> diag chassis-info;show boot;admin show variables boot;show variables
>> boot;dir /all nvram:;dir /all slot0:;dir /all disk0:;dir /all slot1:;dir
>> /all disk1:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all
>> harddiska:;dir /all harddiskb:;dir /all sup-bootflash:;dir /all
>> sup-microcode:;dir /all slavenvram:;dir /all slavebootflash:;dir /all
>> slaveslot0:;dir /all slavedisk0:;dir /all slaveslot1:;dir /all
>> slavedisk1:;dir /all slaveslot2:;dir /all slavedisk2:;dir /all
>> slavesup-bootflash:;dir /all sec-nvram:;dir /all sec-bootflash:;dir /all
>> sec-slot0:;dir /all sec-disk0:;dir /all sec-slot1:;dir /all
>> sec-disk1:;dir /all sec-slot2:;dir /all sec-disk2:;show controllers;show
>> controllers cbus;show diagbus;admin show diag;show diag;show module;show
>> spe version;show c7200;show inventory raw;show vtp status;show vlan;show
>> vlan-switch;show debug;more system:running-config;show
>> running-config;write term" mdr-tr1
>> mdr-tr1 clogin error: Error: Bad command.
>> mdr-tr1 clogin error: Error: Bad command.
>> mdr-tr1: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp
>> chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr
>> chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,dir
>> /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all
>> disk0:,show install active,dir /all slaveslot0:,dir /all sec-slot1:,dir
>> /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all
>> slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show
>> variables boot,show boot,show inventory raw,dir /all slavedisk1:,show
>> env all,show module,admin show env all,show controllers,admin show
>> version,show diagbus,more system:running-config,dir /all
>> slavedisk0:,show debug,show idprom backplane,dir /all sec-slot0:,dir
>> /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir
>> /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all
>> sup-microcode:,show vlan,dir /all slavebootflash:,show controllers
>> cbus,dir /all slaveslot1:,dir /all nvram:,show version,show
>> vlan-switch,admin show variables boot,show redundancy secondary,show
>> running-config,show c7200,dir /all slot1:
>> mdr-tr1: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp
>> chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr
>> chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,dir
>> /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all
>> disk0:,show install active,dir /all slaveslot0:,dir /all sec-slot1:,dir
>> /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all
>> slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show
>> variables boot,show boot,show inventory raw,dir /all slavedisk1:,show
>> env all,show module,admin show env all,show controllers,admin show
>> version,show diagbus,more system:running-config,dir /all
>> slavedisk0:,show debug,show idprom backplane,dir /all sec-slot0:,dir
>> /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir
>> /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all
>> sup-microcode:,show vlan,dir /all slavebootflash:,show controllers
>> cbus,dir /all slaveslot1:,dir /all nvram:,show version,show
>> vlan-switch,admin show variables boot,show redundancy secondary,show
>> running-config,show c7200,dir /all slot1:
>> mdr-tr1: End of run not found
>> mdr-tr1: End of run not found
>> 
>> Any help would be much appreciated.
>> 
>> Regards
>> 
>> -- 
>> 
>> *Barry Murphy* | barry at vibecommunications.co.nz
>> <mailto:barry at vibecommunications.co.nz> | Chief Operating Officer
>> | *Vibe Communications Limited *| Mobile: 0274 909 712
>> 
>> Unit A7, 1 Beresford Square, Auckland Central 1010 | PO Box 68707,
>> Newton, Auckland 1145 | Phone: 09 222 0000 Ext 6 | 0800 842326 | Fax:
>> 0800 842327
>> 
>> WEB: http://www.vibecommunications.co.nz
>> 
>> Peering: http://as45177.peeringdb.com/
>> 
>> 
>> Description: Description: Description:
>>cid:image001.png at 01CB9D57.2FAB9280
>> 
>> /³Solution specialists achieving great results within economic
>>realities²/
>> 
>> /
>> /
>> 
>> /This communication, including any attachments, is confidential. If you
>> are not the intended recipient, you should not read it - please contact
>> me immediately, destroy it, and do not copy or use any part of this
>> communication or disclose anything about it. Thank you. Please note that
>> this communication does not designate an information system for the
>> purposes of the Electronic Transactions Act 2002./
>> 
>> 
>> 
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss at shrubbery.net
>> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>> 
>
>
>-- 
>Alan McKinnon
>alan.mckinnon at gmail.com
>
>_______________________________________________
>Rancid-discuss mailing list
>Rancid-discuss at shrubbery.net
>http://www.shrubbery.net/mailman/listinfo/rancid-discuss