[rancid] RANCID is incorrectly parsing my Cisco IOS Firewall, adding linebreaks, joining lines, etc

[heasley]

Sat, Sep 13, 2014 at 01:07:11PM -0400, Lee:
> looks like there was a change - Gi5/14 was added to vlan 1

Correct.  the catalyst do not seem to be consistent with how they order
ports in the list when the list changes, but do not seem to change the
order otherwise.

> lee
> 
> On 9/12/14, Jason Humes <JHumes at acs.on.ca> wrote:
> > Here is an example;

are you doing vtp?

> > Index: configs/ core4506
> > ===================================================================
> > - -- configs/ core4506	(revision 198)
> > @@ -446,9 +446,9 @@
> >   !VLAN:                                                 Fa2/6, Fa2/7,
> > Fa2/8, Fa2/10, Fa2/11, Fa2/13, Fa2/14, Fa2/15, Fa2/16, Fa2/17, Fa2/19
> >   !VLAN:                                                 Fa2/20, Fa2/22,
> > Fa2/23, Fa2/24, Fa2/29, Fa2/32, Fa2/33, Fa2/34, Fa2/40, Fa2/41
> >   !VLAN:                                                 Fa2/42, Fa2/43,
> > Fa2/44, Fa2/45, Fa2/46, Fa2/47, Fa2/48, Te3/1, Te3/2, Gi3/3, Gi3/4
> > - !VLAN:                                                 Gi3/5, Gi3/6,
> > Te4/1, Te4/2, Gi4/3, Gi4/4, Gi4/5, Gi4/6, Gi5/34, Gi6/5, Gi6/15
> > - !VLAN:                                                 Gi6/18, Gi6/19,
> > Gi6/20, Gi6/22, Gi6/23, Gi6/24, Gi6/28, Gi6/34, Gi6/35, Gi6/36
> > - !VLAN:                                                 Gi6/37, Gi6/38,
> > Gi6/39, Gi7/7, Gi7/8, Gi7/9, Gi7/10, Gi7/11, Gi7/12
> > + !VLAN:                                                 Gi3/5, Gi3/6,
> > Te4/1, Te4/2, Gi4/3, Gi4/4, Gi4/5, Gi4/6, Gi5/14, Gi5/34, Gi6/5
> > + !VLAN:                                                 Gi6/15, Gi6/18,
> > Gi6/19, Gi6/20, Gi6/22, Gi6/23, Gi6/24, Gi6/28, Gi6/34, Gi6/35
> > + !VLAN:                                                 Gi6/36, Gi6/37,
> > Gi6/38, Gi6/39, Gi7/7, Gi7/8, Gi7/9, Gi7/10, Gi7/11, Gi7/12
> >   !VLAN: 2    Engineering                      active    Fa1/29, Fa1/32,
> > Fa1/35, Fa1/44, Fa1/45, Fa1/47, Fa2/18, Gi5/15, Gi5/33, Gi6/32
> >   !VLAN:                                                 Gi6/40
> >   !VLAN: 3    EDM                              active
> >
> >
> > Jason
> >
> > -----Original Message-----
> > From: Jason Humes
> > Sent: Friday, September 12, 2014 3:06 PM
> > To: rancid-discuss at shrubbery.net
> > Subject: RANCID is incorrectly parsing my Cisco IOS Firewall, adding
> > linebreaks, joining lines, etc
> >
> > Hi
> > Recently upgraded to RANCID 3.1 and I'm finding all our Cisco devices are
> > coming up with new configs after every run due to rancid adding line breaks
> > in some cases and in others it joins two lines of the config.
> >
> > Any thoughts on why this might be going on?  I'm running Ubuntu 14.04.
> >
> > Thanks
> >
> >
> > Jason
> >
> > _______________________________________________
> > Rancid-discuss mailing list
> > Rancid-discuss at shrubbery.net
> > http://www.shrubbery.net/mailman/listinfo/rancid-discuss
> >
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss