[rancid] RANCID is incorrectly parsing my Cisco IOS Firewall, adding linebreaks, joining lines, etc

[Lee]

On 9/15/14, heasley <heas at shrubbery.net> wrote:

> Sat, Sep 13, 2014 at 01:07:11PM -0400, Lee:

>> looks like there was a change - Gi5/14 was added to vlan 1
>
> Correct.  the catalyst do not seem to be consistent with how they order
> ports in the list when the list changes,

really?   Not that I've paid all that much attention to it, but the
list always seems to be in ascending order.   At least for cat6500s...

Lee


>> lee
>>
>> On 9/12/14, Jason Humes <JHumes at acs.on.ca> wrote:
>> > Here is an example;
>
> are you doing vtp?
>
>> > Index: configs/ core4506
>> > ===================================================================
>> > - -- configs/ core4506	(revision 198)
>> > @@ -446,9 +446,9 @@
>> >   !VLAN:                                                 Fa2/6, Fa2/7,
>> > Fa2/8, Fa2/10, Fa2/11, Fa2/13, Fa2/14, Fa2/15, Fa2/16, Fa2/17, Fa2/19
>> >   !VLAN:                                                 Fa2/20,
>> > Fa2/22,
>> > Fa2/23, Fa2/24, Fa2/29, Fa2/32, Fa2/33, Fa2/34, Fa2/40, Fa2/41
>> >   !VLAN:                                                 Fa2/42,
>> > Fa2/43,
>> > Fa2/44, Fa2/45, Fa2/46, Fa2/47, Fa2/48, Te3/1, Te3/2, Gi3/3, Gi3/4
>> > - !VLAN:                                                 Gi3/5, Gi3/6,
>> > Te4/1, Te4/2, Gi4/3, Gi4/4, Gi4/5, Gi4/6, Gi5/34, Gi6/5, Gi6/15
>> > - !VLAN:                                                 Gi6/18,
>> > Gi6/19,
>> > Gi6/20, Gi6/22, Gi6/23, Gi6/24, Gi6/28, Gi6/34, Gi6/35, Gi6/36
>> > - !VLAN:                                                 Gi6/37,
>> > Gi6/38,
>> > Gi6/39, Gi7/7, Gi7/8, Gi7/9, Gi7/10, Gi7/11, Gi7/12
>> > + !VLAN:                                                 Gi3/5, Gi3/6,
>> > Te4/1, Te4/2, Gi4/3, Gi4/4, Gi4/5, Gi4/6, Gi5/14, Gi5/34, Gi6/5
>> > + !VLAN:                                                 Gi6/15,
>> > Gi6/18,
>> > Gi6/19, Gi6/20, Gi6/22, Gi6/23, Gi6/24, Gi6/28, Gi6/34, Gi6/35
>> > + !VLAN:                                                 Gi6/36,
>> > Gi6/37,
>> > Gi6/38, Gi6/39, Gi7/7, Gi7/8, Gi7/9, Gi7/10, Gi7/11, Gi7/12
>> >   !VLAN: 2    Engineering                      active    Fa1/29,
>> > Fa1/32,
>> > Fa1/35, Fa1/44, Fa1/45, Fa1/47, Fa2/18, Gi5/15, Gi5/33, Gi6/32
>> >   !VLAN:                                                 Gi6/40
>> >   !VLAN: 3    EDM                              active
>> >
>> >
>> > Jason
>> >
>> > -----Original Message-----
>> > From: Jason Humes
>> > Sent: Friday, September 12, 2014 3:06 PM
>> > To: rancid-discuss at shrubbery.net
>> > Subject: RANCID is incorrectly parsing my Cisco IOS Firewall, adding
>> > linebreaks, joining lines, etc
>> >
>> > Hi
>> > Recently upgraded to RANCID 3.1 and I'm finding all our Cisco devices
>> > are
>> > coming up with new configs after every run due to rancid adding line
>> > breaks
>> > in some cases and in others it joins two lines of the config.
>> >
>> > Any thoughts on why this might be going on?  I'm running Ubuntu 14.04.
>> >
>> > Thanks
>> >
>> >
>> > Jason
>> >
>> > _______________________________________________
>> > Rancid-discuss mailing list
>> > Rancid-discuss at shrubbery.net
>> > http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>> >
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss at shrubbery.net
>> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>