[rancid] rancid-run returning no output

[Ryan Milton]

I deleted the directories, re-ran /usr/local/rancid/bin/rancid-cvs

This successfully created the directories again.

I know that the jrancid or jerancid is run from /usr/local/rancid/bin/

after recreating the directories that end up:

/usr/local/rancid/var/networking/ (from rancid-cvs)

I test with  bin/jlogin 10.50.1.2

works

I test with bin/rancid-run 10.50.1.2

I get noting in the log but a start and an end time. In the past,
rancid-run takes some time. This time it just flashes.

I'm feeling stumped on this...



Ryan Douglass Milton


On Sat, Feb 14, 2015 at 2:35 PM, Alan McKinnon <alan.mckinnon at gmail.com>
wrote:

> On 14/02/2015 19:44, Ryan Milton wrote:
> > That is what I thought would debug, however, this is the output I get:
> >
> > rancid at FP-RANCID:~$ rancid -d 10.50.1.1
> > loadtype(): device_type is empty
> > Couldn't load device type spec for
> > rancid at FP-RANCID:~$*jrancid -d 10.50.1.1*
> > jrancid: command not found
> > rancid at FP-RANCID:~$*/usr/local/rancid/bin/jrancid -d 10.50.1.1*
> > -bash: /usr/local/rancid/bin/jrancid: No such file or directory
> > rancid at FP-RANCID:~$ cd /usr/local/rancid/bin
> > rancid at FP-RANCID:/usr/local/rancid/bin$ jrancid -d 10.50.1.2
> > jrancid: command not found
> > rancid at FP-RANCID:/usr/local/rancid/bin$ jrancid -d 10.50.1.1
>
>
>
> Those are Unix errors, you are not giving the correct path to the
> jrancid executable. You need to find it and provide that directory path
>
>
>
>
>
>
> >
> >
> >
> > Ryan Douglass Milton
> >
> >
> > On Sat, Feb 14, 2015 at 3:23 AM, Alan McKinnon <alan.mckinnon at gmail.com
> > <mailto:alan.mckinnon at gmail.com>> wrote:
> >
> >     On 14/02/2015 02:32, Ryan Milton wrote:
> >     > Hi all,
> >     >
> >     > I'm getting slowly closer to my goal...
> >     >
> >     > Rancid IS running...however, it seems that it may NOT be capturing
> >     any configs.
> >     > My original problem had been that I couldn't get the rancid-cvs to
> >     function. That did work.
> >     > running rancid v 3.1
> >     > now, when I run the command:
> >     >
> >     > /usr/local/rancid/bin/rancid-run   or
> >     > /usr/local/rancid/bin/rancid-run -r 10.50.1.1
> >     >
> >     > I get the following empty message :
> >     >
> >     > starting: Fri Feb 13 19:16:47 EST 2015
> >     >
> >     >
> >     >
> >     > ending: Fri Feb 13 19:16:47 EST 2015
> >     > ~
> >     > This  works:
> >     > rancid at FP-RANCID:/usr/local/rancid/var/logs$ jlogin 10.50.1.3
> >     > 10.50.1.3
> >     > spawn ssh -c 3des -x -l rancid 10.50.1.3
> >     > rancid at 10.50.1.3 <mailto:rancid at 10.50.1.3>'s password:
> >     > --- JUNOS 12.3R8.7 built 2014-09-19 15:47:21 UTC
> >     > {master:0}
> >     > rancid at Distribution_North>
> >
> >
> >     rancid -d <hostname>
> >
> >     will give debug output so you can see what's going on.
> >
> >     Looks like you have Junipers, so use
> >
> >     jrancid for those instead. In either event, it's usually quite
> obvious
> >     where the problem lies once you get proper debug output
> >
> >
> >
> >     --
> >     Alan McKinnon
> >     alan.mckinnon at gmail.com <mailto:alan.mckinnon at gmail.com>
> >
> >     _______________________________________________
> >     Rancid-discuss mailing list
> >     Rancid-discuss at shrubbery.net <mailto:Rancid-discuss at shrubbery.net>
> >     http://www.shrubbery.net/mailman/listinfo/rancid-discuss
> >
> >
>
>
> --
> Alan McKinnon
> alan.mckinnon at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20150216/eddcbbf0/attachment.html>