[rancid] rancid-run returning no output

[Daniel Tuecks]

Hey Ryan,

if jlogin is working check your router.db just to make sure your device is
in there and you are using the correct syntax (delimiter in router.db
changed from ":" to ";" in rancid 3.0+).

Daniel
Am 16.02.2015 23:06 schrieb "Ryan Milton" <ryanmilton74 at gmail.com>:

> I deleted the directories, re-ran /usr/local/rancid/bin/rancid-cvs
>
> This successfully created the directories again.
>
> I know that the jrancid or jerancid is run from /usr/local/rancid/bin/
>
> after recreating the directories that end up:
>
> /usr/local/rancid/var/networking/ (from rancid-cvs)
>
> I test with  bin/jlogin 10.50.1.2
>
> works
>
> I test with bin/rancid-run 10.50.1.2
>
> I get noting in the log but a start and an end time. In the past,
> rancid-run takes some time. This time it just flashes.
>
> I'm feeling stumped on this...
>
>
>
> Ryan Douglass Milton
>
>
> On Sat, Feb 14, 2015 at 2:35 PM, Alan McKinnon <alan.mckinnon at gmail.com>
> wrote:
>
>> On 14/02/2015 19:44, Ryan Milton wrote:
>> > That is what I thought would debug, however, this is the output I get:
>> >
>> > rancid at FP-RANCID:~$ rancid -d 10.50.1.1
>> > loadtype(): device_type is empty
>> > Couldn't load device type spec for
>> > rancid at FP-RANCID:~$*jrancid -d 10.50.1.1*
>> > jrancid: command not found
>> > rancid at FP-RANCID:~$*/usr/local/rancid/bin/jrancid -d 10.50.1.1*
>> > -bash: /usr/local/rancid/bin/jrancid: No such file or directory
>> > rancid at FP-RANCID:~$ cd /usr/local/rancid/bin
>> > rancid at FP-RANCID:/usr/local/rancid/bin$ jrancid -d 10.50.1.2
>> > jrancid: command not found
>> > rancid at FP-RANCID:/usr/local/rancid/bin$ jrancid -d 10.50.1.1
>>
>>
>>
>> Those are Unix errors, you are not giving the correct path to the
>> jrancid executable. You need to find it and provide that directory path
>>
>>
>>
>>
>>
>>
>> >
>> >
>> >
>> > Ryan Douglass Milton
>> >
>> >
>> > On Sat, Feb 14, 2015 at 3:23 AM, Alan McKinnon <alan.mckinnon at gmail.com
>> > <mailto:alan.mckinnon at gmail.com>> wrote:
>> >
>> >     On 14/02/2015 02:32, Ryan Milton wrote:
>> >     > Hi all,
>> >     >
>> >     > I'm getting slowly closer to my goal...
>> >     >
>> >     > Rancid IS running...however, it seems that it may NOT be capturing
>> >     any configs.
>> >     > My original problem had been that I couldn't get the rancid-cvs to
>> >     function. That did work.
>> >     > running rancid v 3.1
>> >     > now, when I run the command:
>> >     >
>> >     > /usr/local/rancid/bin/rancid-run   or
>> >     > /usr/local/rancid/bin/rancid-run -r 10.50.1.1
>> >     >
>> >     > I get the following empty message :
>> >     >
>> >     > starting: Fri Feb 13 19:16:47 EST 2015
>> >     >
>> >     >
>> >     >
>> >     > ending: Fri Feb 13 19:16:47 EST 2015
>> >     > ~
>> >     > This  works:
>> >     > rancid at FP-RANCID:/usr/local/rancid/var/logs$ jlogin 10.50.1.3
>> >     > 10.50.1.3
>> >     > spawn ssh -c 3des -x -l rancid 10.50.1.3
>> >     > rancid at 10.50.1.3 <mailto:rancid at 10.50.1.3>'s password:
>> >     > --- JUNOS 12.3R8.7 built 2014-09-19 15:47:21 UTC
>> >     > {master:0}
>> >     > rancid at Distribution_North>
>> >
>> >
>> >     rancid -d <hostname>
>> >
>> >     will give debug output so you can see what's going on.
>> >
>> >     Looks like you have Junipers, so use
>> >
>> >     jrancid for those instead. In either event, it's usually quite
>> obvious
>> >     where the problem lies once you get proper debug output
>> >
>> >
>> >
>> >     --
>> >     Alan McKinnon
>> >     alan.mckinnon at gmail.com <mailto:alan.mckinnon at gmail.com>
>> >
>> >     _______________________________________________
>> >     Rancid-discuss mailing list
>> >     Rancid-discuss at shrubbery.net <mailto:Rancid-discuss at shrubbery.net>
>> >     http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>> >
>> >
>>
>>
>> --
>> Alan McKinnon
>> alan.mckinnon at gmail.com
>>
>>
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20150217/447d4d9c/attachment.html>